How to lay tile on the wall

Using tiles for repair is popular for decades.This is due to its distinctive functional and operational features.Stoned walls of any kind can be yourself.We need to clearly understand the whole cladding technology.How to put the tiles on the wall, we explain in this article.

Stages tilewall

should be carried out at each stage of the job thoroughly.It is enough to choose the wrong type of tile and all the work will come to nothing.A tile is divided into four classes by the level of safety.For example: stoned brittle tile floor a short period of time, can detect cracks in the coating.

preliminary stage

first action step: accurate calculation of the required number of tiles, colors and models.

Many in self calculation are wondering how to lay tiles on the wall and do not buy the excess amount of material required?It is necessary to measure with the help of the roulette wall height and width, i.e.determine the area of ​​the future of the working surface and the yardage required material.Tip - buy with a small margin of 1-2 square meters.

preparatory stage

most importantly - Preparing the wall.On the surface of the tiles put unprepared will not work perfectly.If the surface is smooth and level - you can start lining using an adhesive or mastic.

To check on the evenness of stone surfaces, a special rake.All irregularities must be eliminated more than 4mm.

All defects are removed using a special solution and tools can be used and the plaster.If you are using the latest special rails are used for leveling walls.Professionals advise further primed surface.

Facing stage

Putting tiles on the wall you can start from the floor or from the wall.There is no particular difference.But if it starts to work on the floor - the joints between the tiles on the floor and the wall should be firmly pressed.

further diluted in a bucket of glue and the work begins with the installation of tiles in the lower right corner.The adhesive is applied evenly and gently necessarily.

working material is pressed to the wall with no great effort.For better grip tiles rattle handle staples.The first row must be secured by means of a previously prepared support, which should be perfectly flat.Immediately fit not more five series of work items.Remove the plastic crosses at the intersection of four tiles with the help of sewing.

How to lay tile on the wall of plasterboard?Banding passes for the above described method, only the surface of the crate to be reinforced, adhesive is applied to the tile.

How to lay tile on the wall in the bathroom?The technology does not differ from the standard.Just do not skimp on the adhesive formulations to circumvent all the plumbing spreading room to use special tongs with which you can make tiles shape.

How to lay tile in the kitchen apron?Technology is the same.The difference - choose the best acrylic primer, in the presence of the concrete surface should be used betonokontakt, which dries very quickly.

final stage

One day the glue is dry, it is necessary to hold the staple with a rubber grout and caulking, and subsequent removal of the excess part of the working surface.

In this article are presented for illustrative photos and videos, answering the question of how to put the tiles on the wall.

Video tile on the wall with his hands