Bio-fireplace with his hands

Fire - relaxes and envelops the room in a warm and cozy atmosphere.However, a slow and relaxing quiet fire, hardly burning house someone will cause a storm of privacy and tranquility.Fortunately, modern technology has allowed in each house add a touch of relaxing living fire.This can be done with the help of bio fireplaces.

Their range and design execution allows each buyer to choose a fireplaceunder the direction of the interior of the room.True, not every ordinary buyer satisfied with their high cost.And if a person is a little entree into the construction industry, it is easily able to make Bio-fireplace with his hands, using quite simple technique and available materials.It should be noted, the device Bio Fireplace nothing daunting and impossible.Just use any refractory capacity to impose it with stones and choose the combustible material with an alcohol compound.

Bio-fireplace made for a flat with their hands, will not only be a key element of the interior, but also the subject of a host of pride.

Table biofireplaces

Miniature Bio Fireplace, made by hand, from scrap materials will surprise with its beauty and simplicity of execution.

Materials

• glass cutter;
• refractory stones;
• glass;
• metal container;
• sealant for bonding glass;
• bioethanol;
• mesh of steel;
• box at the base of the steel chimney.

Procedure

1. It is necessary to make a correct calculation.It is believed that one burner distance between the side windows must not be less than 15 cm. Biofireplaces size is calculated based on every 16 square meters.m 1 burner.

2. Based on the size of the box to fire cut glass, then glued sealant.

3. The metal vessel is filled with fuel is bioethanol.Distance between several burners must be 15 cm.

4. From steel mesh cut 2 rectangles, whose size must match the dimensions of the box.

5. The grid must be decorated with stones or other non-combustible materials.

Embedded biofireplaces

most common and traditional are embedded in the wall bio fireplaces, which saves space in the apartments.Before starting work, is to make detailed drawings.Regarding the arrangement, it may be a corner of the room, the center wall, and any other location in the room.

for manufacturing bio fireplaces portal with their hands come to the aid drill, gypsum board, guide profiles and screws.Referring to the drawing set profile, fixed drywall left a niche for heating.Inside the frame is set to carry out the wiring, which will in the future to connect the different decorative lighting.The finished design is left to decorate, putty first, and then you can oblitsevat using tiles, plaster, artificial stone or plaster moldings.

should make inner zone biofireplaces double, using heat-resistant insulating material.To underscore the effect of the fire zone can decorate drovnitsa and forged elements, which is a sign falshkaminov.Consider an interesting photo and video bio fireplaces can be on the site, where detailed instructions and a variety of models allows you to choose the right model.

Bio Fireplace firebox should furnish stones.Next, you need to solve the problem with the fuel supply, its role can play a metal vessel.Fuel for bio fireplaces sold in plastic containers, however, the content should be poured into a metal cup.The cup is set in the center of the fireplace.In this case the stones are not only fulfill an aesthetic function, but also ensure uniform heat transfer.

For large built-in bio fireplaces sold in stores cylinder burner or a special fuel tank.

As you can see with the help of photos and videos easy enough to understand how to make their own hands Bio Fireplace.

Video biofireplaces own hands