Connecting electric stove with his hands

When working with the mains, always disconnect the electricity.Usually, the last electric versions sold without connecting cord.Connecting the electric stove it should be done with the use of high-quality terminals.And used bezrozetochnoe connection.This connection allowed the use of longer cables with fuses.The truth is sometimes possible to use the socket.It is important that this current socket has not been less than 32 amps.

Unauthorized connection electric stove is also acceptable, but it should be borne in mind that the core diameter of the cable is not less than4 mm.If the cable length exceeds 12 meters, the diameter of the copper conductor must be at least 6 mm.Moreover, the cable must be protected by a self-contained automatic cutout.

Wiring cookers

Wiring electric stoves of this type is called radial.There is also a circular diagram.In this scheme, connect multiple sockets can be placed on a single cable.Do not connect multiple appliances through a bug.

To answer the question of how to connect the electric stove with your hands, you should know how many there are wiring diagrams.And the built-in electric stove connection is no different from the connection of battery plates.There is a single-phase, two-phase and three phase electric connection.As in our apartments distributed single-phase system, the plate and be connected by a single-phase circuit.To this end, the terminal block installed corresponding jumper.Then, to block connect the power cable.Outlet should be set to selected place so that enough length of the cable.

Particular attention should be paid to the connection when connecting electric stove burners.Burner connection diagram can be found in the data sheet that came with the purchase of electric stoves.Usually burner includes a body made of steel, terminals, insulated heaters and flat type.

heating element is installed in an appropriately sized box.The surface of the cooking zone must be higher than the surface of the plate itself.There are special screws that adjust the horizontal position of the heating elements.cable cores are connected to the screws and the corresponding nuts are clamped.Connecting burners - a process quite laborious and responsible.In case of improper installation of the heating elements can damage the electric stove.

Once you have set the hotplate in the electric stove should check if the connection is made to the switchboard.Only then should you connect the stove to check its operation in a test mode.Moreover, it is important to check in this mode, all the options are provided in the instructions.Based on many years of experience in operating electric it can be argued that when properly connected tiles will serve as a reliable and long enough.If you are not completely confident in their abilities, it is better to use the services of specialists.

Video

connecting electric stove with his hands for clarity suggest you view the video connection appliance.