A fence of corrugated board with their own hands

Before you start building a new land should take care of the practical and safe fence.In addition, it is important to your future guard had defects, has excellent aesthetic qualities and organically fit into the surrounding landscape.

today, there are a whole lot of different designs, mounting technologies and materials for the construction of protective barriers plot.It should be noted that each of the types of fence are both positive aspects and weaknesses.One of the most successful, economical and easy-to-build is to provide a structure of corrugated (also known as steel sheet or metal profile), as in the photo.

Build a fence of corrugated their own hands will not take much effort.All you need to do - it's high-quality construction materials, as well as strict adherence to the rules of the construction process.So, how to make such a fence?

fence Advantages of profiled sheet

Why should you opt for a fence of metal sheets:

1. Easy installation;
2. Cancel strength and resistance to aggressive environments;
3. Excellent reliability and protects against unwanted looks;
4. Longer lifetime;
5. Not picky in care;
6. Perfect insulation;
7. Laconic and graceful appearance;
8. availability.

Materials for the installation of a fence of corrugated board with his hands

Of course, the basic material of this design is a trapezoidal sheet.This material is made of durable galvanized steel and has a ribbed trim shape.The main advantage of this material over their counterparts - a low cost, durability and ease of use.So, the list of materials that can be incorporated into the estimate :

Step by step instructions for installing a fence made of profiled sheet

I. Marking a location nearby.

Before starting markup is important to remove the perimeter measurements of your land.Next, calculate the required number of supports oriented (step 2-3 m).Only then we can start the markup itself.We start with the "break" a peg in all corners of the area.Alternately connect the pegs properly tensioned thread.With roulette shoot the final dimensions and prepare a holistic fencing project.

II.Mounting supports.

as supporting pillars of your fence can serve as a metal pipe round and rectangular.Ordering support, it should be noted that, ideally 1/3 column length is buried.For example, for a fence height of 2 meters, the required foundation pit depth of 1-1.5 m (depth of soil freezing), that is, order the tube length of at least 3 m.

Once the pit is ready, care should be taken concrete solutions (suitable concrete marks M200 and M250).

III.Mounting lag cross the fence.

Designing the fence should be at the rate of 1 per 1 m of the lag of the fence height.That is, for a fence height of no more than two meters must be installed parallel to the pair of lag.

for fixing the lag to the supports is recommended to use welding, which should give the structure added rigidity and strength, but can also use bolts.

IV.Installation sheeting.

The final step is to mount the sheets of corrugated board to the frame of the fence.Stykovyvaem sheets overlap, at least one "wave".For mounting use screws or rivets roof.

At this stage, the installation of the fence of trapezoidal sheet is completed, become more familiar with the technology, advice of experienced builders, as well as with relevant photos and videos you can in this article.

Photo fence of corrugated board with his hands

See photos Fences made of profiled sheet, made with his own hands:

Videos Construction fence of corrugated

Watch the video installation of the fence of metal sheets with his hands: