Glazing of balconies with their hands

unglazed balcony performs its function is not fully.It seems to be possible to carry out some action, but there is always the fear that the bad weather, or neighbors from the top floors will make some adjustments in your plans.Use it as a place of storage is also impossible.In order to protect a piece of its space, the right decision is, glazed balcony .

balcony glazing options there are many, in this youyou can verify this by looking photo in the article, but the most interesting is independent of such repairs.

Preliminary measurements and calculations

Before you perform plastic glazing the balcony, you need to clearly understand what the dimensions of windows are needed.To do this, remove the old glazing, if it is, of course, was holding the frame disassembly and fixtures.We remove all clean, so you can see the overlap of the top and base of the parapet.

next step - a direct measurement of all necessary sizes, from the ceiling to the parapet, and between the two walls.It is also important to make sure the parapet in the horizontal using a spirit level.After all, if there is a bias in more than 15 mm, the frame may simply not fit into the connector.

Preparations

When glazing balconies with their hands preliminary work are reduced to prepare for the future installation of the parapet of the window frame.Inspect the parapet, if you have any doubts about its base of strength and stability, it is best to make a new one.To do this, remove the old, and in its place lay a brick in a brand new, all strictly on the level.

After that produce a framework for the installation of the frame around the perimeter of the parapet.For such a purpose is perfect area of ​​the metal section of 0.5 cm, which is fastened with dowels to the parapet.

If you are satisfied with the old parapet, it is necessary, in the presence of cracks, repaired it using galvanized sheet.For this we are measuring the size of the gap, and then we start pre-cut piece of zinc coating on the outside under the railing and fix it on the screws.Such work is best done with a partner.

glazing process balconies with their hands

1. take out glazing of the frame to facilitate the weight of 25-30 kg.To do this, pull the bead, which is directed along the window, remove the glass and put it next to the cleaned floor.Opening shutters can be left with glass.
2. Remove from the sash frames: in the upper loop of push rod toward the bottom, and then tilt the flap and lift it by 3-5 cm, permanently removing the valve from the lower hinge.
3. Podstavochny Attach plastic profile for the bottom of the frame.
4. Mount fixing elements for the frame.Step back 150 mm from the extreme positions of the frame and, with the help of silver screws and drill length of at least 3 cm, secure mounting.
5. Mount the frame in the opening.To do this, fasten the mounting plate screws.
6. Putting frames in one unit with screws.Check vertically and horizontally.
7. Attach the frame to the parapet anchors.
8. Zapenivaem slot and install the visor.
9. Insert windows, and hung sash.
10. After checking for leaks fit shutters closed, and full operation of all the elements mount ebb and sill.

With video glazing of balconies can be found below in this article.

Video balcony glazing