Tumble dryer with their hands

summer drying things usually give no problems worse in the rest of the time, when it's cold or the rain.Dries all long, we have to bring the wet stuff in the room and throw on batteries.This salvation - dryer.It refers to those things that make our everyday life more comfortable, that's just the price confused.In this article we will write out all the stages of manufacture of the devices with their own hands.

Types of clothes dryers

Tumble Dryers are different:

• ceiling;
• floor;
• wall.

Each hostess chooses the most convenient model for the conditions.Any of them may make their own hands.Which designs are not only coming up with domestic masters!Look for drying laundry, which is located below the photo:

This is an original and compact dryer sliding 36 seats.It consists of 10 sections.At each took:

• 2 strips of plywood;
• 3 metal bridges.

Dryer wall with their hands

How to do it, it is not difficult to guess, it is necessary only to look at the photo.

This comfortable fit dryer on the balcony, in the bathroom.It does not take up much space, and when dry does not need anything, she just made up.For its production need:

• bars of wood and boards;
• board of fiberboard or MDF;
• hinges for furniture;
• hooks and furniture handles;
• retainer;
• mechanism of transformation;
• screws, nails, paint .;
• drill.

So, for the work:

• do 4 bars for the boards of the frame;
• harvests 4 identical wooden rod;
• split side rails into equal segments;
• drill bars in blind holes, focusing on the diameter of the rod;
• insert rods in the middle of the frame, previously spearheaded a few tips;
• frame fastening screws;
• handle board so that its width coincides with the width of the frame, but remained greater length 15 cm;
• join the board and the bars to each other by means of furniture hinges;
• gruntuem product varnish or paint;
• anchoring clamp at the top and with one side transformation mechanism;
• divide the lower part of the wall board into 3 parts;
• drill holes for furniture handles;
• set handles.Possible replacement handles on the hooks.

That's all for the clothes dryer wall is ready, it remains only to fix the board on the wall.

dryer heated

to quickly dry a thing, we put it on the battery.Much more convenient to do it in the dryer, specially adapted to the radiator.To gather its required:

• panel - 2 pcs.wood, MDF or particleboard.In height they should be slightly higher than the battery;
• metal pipe - 5 of smaller diameter 5 and more;
• wooden spikes;
• stub pipe;
• glue.

do the work in the following order:

1. The top of the panel on the inside drill to 5 blind holes under the spikes.
2. front side panels divide into 3 equal parts, after retreating from the bottom 10 centimeters, note the point and drilled a through hole, then blind, through and over the blind.
3. Blind holes smeared with glue, and scoring spikes, give dry.
4. Gaining the top, fixing the pipe of smaller diameter on the thorns.
5. Putting the front part, using larger diameter pipes, with some anchoring spikes, and other threaded through-hole.
6. Dress peeking at the ends of pipes, end caps.
7. If the radiator is a regulator, then cut a hole under him on the side panel.

Dryer ceiling in the bathroom

order to dry clothes in the bathroom fit simple, consisting of hooks and ropes dryer.For it is required:

• hooks, screws pieces 8-10;
• cable or a suitable color, beautiful rope.

And further:

• do layout and drill on opposite walls near the ceiling over the tub opening;
• hooks set;
• stretch the rope.

Comfortable clothes dryer with their hands

convenient to use a portable dryer, it is located in any place, and when it is not needed, simply folded and retracted into a nook.The sale of such a lot of models, but also with his own hands is not that worse.To produce the material needed:

• 20 mm plate of chipboard or MDF;
• M6 screws and nuts - 4 pcs .;
• nuts M3 - 48 pcs .;
• screws for furniture - 4 pcs .;
• wheel furniture - 4 pcs .;
• tube diameter of 18 mm and 16 mm;
• furniture handles - 2;
• rod of stainless steel with a diameter of 3 mm.

1. Cut 2 blank sidewall size 70h20 cm and one for the bottom 60h20 see
2. Stepping back from the top edge of the side panel 12 mm, drill hole diameter of 6.5 mm..At a distance of 176 mm from the center of the first hole, the second drill of the same diameter.We do the same panel 2.
3. start assembling the housing bottom, fastening bracket with the bottom side by means of furniture screws.
4. attached to the body, furniture castors.
5. At the end of ties cut from the pipe insert nuts M6 and welds along the contour.
6. Tie dress restrictive ring 5mm wide, carved out of a pipe diameter of 22 mm and 30 mm sleeve length, harvested from the same pipe.
7. restrictive ring is welded to the screed.
8. Of the 16 mm tube frame manufacture.First, cut the workpiece 2 and mark up the sides.In the center of the frame side sleeve dress limited 2 side rings welded to the tube frame.
9. Pipes bending.We get 2 U-shaped piece.
10. into long sections of pipe frame the inside of the drilled holes for the rods.
11. Cut 12 pieces of 3 mm diameter rod.
12. on the workpiece on both sides threaded M3.Insert the rod into the holes and fasten the two nuts on each side.
13. on the side of the hub strut welds, end cap dress.
14. welded to the sleeves Tie the right and left of the frame.
15. We connect with the body frame with screws.
16. Fasten furniture handles on the sides of the body.

Practical clothes dryer floor ready.

Dryer balcony

To make the most simple drying laundry on the balcony, you must have:

• length of pipe made of stainless steel with a diameter of 2-3 cm;
• 4 pieces of wood thickness of 6-8 cm;
• spring;
• rope.

manufacturing process:

1. From bars produce brackets, holes have been drilled on the pipe diameter.We fix them at opposite ends of the balcony.
2. the right pipe drilled holes under the cords at a distance of 10-15 cm from each other.
3. make a knot at one end of each rope and skip them through a hole in the right arm.
4. inserted into the hole of the pipe brackets and fasten them securely.
5. Under the left pipe anchoring the lower end of the spring.
6. left ends of the rope thrown over the left pipe and a strong tie to the springs.
7. Springs and nodes close decorative panel.

dryer, a video about the production of which placed below, it is convenient to have a loggia or balcony.