Installation accessories for the interior doors

installation of interior doors - one of the most important stages of repair work in the room.This operation requires special attention, as the door incorrectly installed or improperly selected and mounted accessories can spoil the impression of the work done.Usually it is sold with pre-installed interior doors accessories that the customer only needs to install.However, often there is the need to install hardware for interior doors yourself.While seemingly simple, the process requires certain skills and utmost concentration, so that the door looked neat and beautiful.One wrong move can ruin expensive chisels door leaf.To learn how to properly install the hardware on the interior doors - on.

Types of fittingsfor interior doors

to install interior door using two types of hardware:

• hinges.They are intended for the flexible installation of the door leaf to the box.Depending on the weight of the door and the material from which it is made, the number and configuration of the loops can vary.As a rule, fixing the so-called "Canadians" (hollow fabric, consisting of a wooden frame and two cover plates) use 2 sets of hinges.To fix heavier doors can be used 3 or more sets of massive loops.
• Hands-locks.They are designed to block the door in a closed position.Handles can be equipped with locks that enable to lock the door on the request of the owner.Handles come in many configurations: rotary, push.A large number of different functionality, design, quality and price models allow you to choose the best option for the doors.
• latches.Mainly serve double-leaf doors, when one of the doors is rarely used.In this case, by using the upper and lower latches are fixed to the lintel and threshold of the door frame and remains stationary.
• rollers.Rollers - the basic fittings for sliding doors.It is they, moving along the guide rails allow the door to open and close.

Selection handles for doors

selector - the most important stage in the selection of accessories for interior doors Archie or any other brand.Choosing the right handle not only emphasize the beauty of the door, but also save the trouble of jamming and breakage lock mechanism.

All pens can be divided into two main categories:

1. Stationary handle.These models are not provided with any mechanism or lock.They are easy to install, do not break, are cheap, very easy to install.However, a disadvantage of such models is that they can not fix the door.
2. Lever handles, or as they are called - falevye in the form of a lever, pushing the person who operates the locking mechanism of the lock and the door opens.Such mechanisms may be provided with different levels of mechanization.Some models are equipped with a tongue, others - bolt, the third - the lock mechanism of the tongue.These models do not require a key and locked using a rotary mechanism.
3. handles with latches and locks.These pens are provided with locking mechanisms, which are installed inside the door.These in turn are divided into two categories:

• Lever.
• Rotary.

Before making the choices, you need to identify the purpose of the door, to decide whether it should be locked and, if so, on which side.

most popular at the moment are models fitted with latches, which block the unlocking tab.On one side is set to lock the handle of the castle, and on the other - there is a small recess with a slot.It allows you to open the lock from the outside any flat object - a screwdriver or coin.With this knob you can easily close the door, for example, in the bedroom, do not present themselves with a key, and if it suddenly locked the children, it is easy to open with the help of available tools.

Convenience lever handle is that they are easy to open, even with busy hands, is only easy to click on it.However, this may be an inconvenience, especially if the house has small children.They easily open these doors just "hang" on the handle, which can be very convenient for parents.Often for such pens clinging clothes.

knob.In such models, unlocking the lock happens when you turn the conical or cylindrical handle.As the push model, they may have locking mechanisms, most of which inhibit rotation of the handle.Such models are convenient if the door is not opened or closed frequently, since it is quite difficult to do with them.

Choosing loops

Choice of loops depends on the type and, above all, the weight of the door.There are several main types of loops for installation of interior doors.

• Sealed.Two halves of such loops are collected and pressed under factory conditions.Typically, they are used for light frame doors.The fact that the door leaf stay in this case it will be possible only if the loop is okruchena boxes from that in the case of massive door is problematic.Typically, these loops included accessories for interior doors coupe that comes with the cloth and box.
• Folding loop allows fairly quickly remove the blade is not spinning accessories.These models are ideal for heavy door leaves.They are easy to maintain, for the lubrication need only raise a little cloth and pour a little oil.For heavy doors, there are models of loops with adjustable during operation without having to remove the web.
• Recently appeared on the market so-called "screw" loop.However, the great popularity they have not yet enjoyed.

When choosing the loop should pay attention to the fact that they are "left", "right" and "universal".

Installation accessories for the interior doors

this stage for many young artists is a certain complexity.In carrying out such work requires not only knowledge of technology, but also accuracy.

hinges and door handle invoice strap should be placed on the "flush" the surface of the canvas and frame, ie have no gaps.The installed hardware on a level with the surface of the structural elements of the door is considered to be excellent work.However, to comply with its perfectly, it is necessary to try very much.

also landing nest the size of a loop or lock must exactly match their size and have no backlash.A tolerance of only 0.5-1 mm.

Tenderloin seats under the door furniture produce a special power tools - a router and manually using a chisel, hammer and scalpel.

Work procedure:

1. The initial stage of the tie loop into the end surface of the door is a markup landing nest.To this end, they sang at a distance of 200-300 mm from the top and bottom of the door leaf screws are screwed.The distance between the hinges on all doors must be the same premises.
2. circled loop contour with a scalpel.However, the scalpel may well make cuts only along the grain of the wood.In cutting the transverse portion, it can cut only the top layer of veneer up to 0.5 mm deep.
3. To start working with a chisel, you must use it to enhance the contour of approximately 2-3 mm.Here, the upper layers and the fibers are cut veneer to a depth of not more than 3.2 mm.Then the loop is removed.Using the chisel gently carried the wood sample to the desired depth.
4. During the process in a seat set loop to measure the required depth.When it is established "flush" sample end.Work must be carefully chisel, easily tapping the butt handle with a hammer.Doors from MDF is very difficult to accurately process a manual cutting tool.For these models it is more expedient to use the router.
5. After landing jack under the loop cut, they are set in place.Next, you need to try on a rack bearing the door frame to the canvas to outline her position loops.For convenience, the process is only necessary to try on a rack, not the whole box.If they are sold already assembled, it is better to parse.What is more convenient to work, the better the result.The process is repeated similarly tie loops, as at the end of the bar.
6. After work, you must install the handle.This step is much more difficult, as it requires more attention.In addition to cutting the seat under the castle, you need to drill a hole right under the handle and latch.Doing this work should be using the router, as the seat has a great depth, and choose it with a chisel rather problematic.
7. At the end of the canvas mounted hinges, handle with the lock and is going to box.On the box is hinged interior door fittings installed and after this celebrated place of landing key-pad, which will capture the tab.To this end, it is applied to any colorant (nail polish), the handle is lowered, the door is closed, and then the handle rises, releasing the latch, which turns the place of contact with the reception.At this place is set pad and cut a recess for the tongue.

Accessories for interior doors: Video