How to make a computer table with his hands

Computers are widely used both for business purposes - for documentation, settlement and the calculation, as well as to watch movies, listen to your favorite music, communicate in social networks, etc.But there is a problem: where and how to place the PC in the home or office so that it takes up little space and at the same time, they were comfortable to use.

excellent output willa special computer table, which not only allows compact and easy to position the monitor, system unit, keyboard, office equipment and so on, but also serves as a desk, storage of documents and other items.

Types of computer tables

Computer tables classified according to several parameters, including:

• Size .For example, a home office desk and a computer completely different in size.The operating conditions are quite pertinent larger models, but in standard apartments in panel houses a modest computer tables looked much more organically.But do not think that the small size means lack of functionality, because it is easily compensated by the presence of a large number of add-ons on top, shelves and cabinets, which are usually placed keyboard, printer, CDs, speakers, required documents, etc.Optimum countertop width computer desk - 60 cm, because the shorter distance from the monitor to eye hazard.But, if for such a table is planned to write, put A4 paper, put the fax, telephone or other equipment, it is advisable to focus on models with a greater width.

• Configuration countertops.It is isolated and shaped linear model.For the linear characteristic of a direct computer desk table top, it has a special compartment for the system unit, pull-out shelf for keyboard and shelf for CDs.Table top model differs curly wavy shape with no corners, so these computer desks are completely safe and they are encouraged to put in the nursery.
• design.Simple computer desks are equipped with only a shelf for the keyboard and the department for the system unit.Their counterparts with the second tier and the second tier understated allow respectively to position the monitor just above or just below the countertop level.Computer Desks undervalued second tier as proved by scientists, reduce the load on the visual apparatus.On the market are also modular computer table, different lots of cabinets, shelves and cabinets like under the surface countertop and over it.Thus, the useful area of ​​the table is increased by several times.
• method movement.For this characteristic tables for the computer are divided into stationary and mobile.Stationary models look more impressive and presentable, have legs, but it is difficult to move them.The mobile legs of the table is replaced by the wheels, so if necessary, they are transported from one room to another in just a few minutes.
• geometric shape .There are direct and angular computer tables.Restrictions on-site direct models no, they look like perfectly against the wall and in the center of the room or office.But a corner table for a computer it is advisable to purchase in a limited area, because it takes up little space, placed in any free corner of the room.The advantage of this table is considered to be an additional space at the expense of the side table tops, which put the books, documents, CDs, stationery, etc.

real discovery in the market segment associated with furniture for computers, steel tables for the computer where the motherboard and other components of the system unit are mounted into the countertop.Of the benefits of such know-how, we note a significant space savings and good cooling of parts of the PC, but at the same time is a computer less protected against mechanical damage.

Materials and tools for making computer desk

to computer table, photos of different models of which are given in this article, meet all the requirements of the owner, it is important to decide on the material for its manufacture.The most common tables from the PC:

• natural wood treated with a special compound and well dried.Positive aspects of this material - environmental friendliness and excellent strength, but at the price of solid wood table will cost a fortune;
• chipboard or MDF;

It is relatively cheap materials, proven in high humidity conditions, and insensitive to mechanical damage.In addition, the table top of any laminated wood board is allowed to cover or veneer, which increases its service life.However, CPD is not considered to be harmless material because of the tendency to allocate to the operation of harmful phenol-formaldehyde resins.With regard to MDF, there are certain doubts as to its resistance to high temperatures.

• metal or tempered glass.So computer desk is not afraid of even the strongest blows, but it is better not to put in homes where there are small children or animals because of the risk of injury.In other cases, they are great to fit into the interior in high-tech style, creating a special futuristic atmosphere;

• plastic.Plastic computer desk stands lightweight, but at the same time is not adapted to withstand heavy objects, so the load on its shelves or a few separation should be minimized.

Now consider what tools will be needed for the manufacture of computer desk made of wood, particle board or MDF.This grinder, drill, square, tape measure, handsaw, pencil, meter ruler, screwdriver, chisel.These are usually available in the arsenal of even not very experienced DIY.

Additional elements of the computer desktop

Computer table does not differ from the usual table, if not for his additional elements just responsible for user comfort.What are the main ones:

• Shelf for keyboard .Traditionally, in order to save space, it is retractable.It is very convenient that it is at 10-12 cm below the countertop, so the user will not get tired hands even after prolonged intensive printing.In addition, exempt additional space at the very top.Shelf is fixed and autonomous keyboard.In the first case, it depends entirely on the design table for a computer, that is impossible to set the length shelf independently.It is mounted on rails that are attached to the sides of the table.Autonomous shelf for keyboard - is the key to the mobility of the table element, which can be easily removed in case of uselessness and installed at virtually any user-friendly angle.

• Stand system unit.It is a necessary part of the computer desktop, which allows to protect the "heart" of the computer from dust, moisture and shock.The most common two designs stand: on the rollers and adjustable furniture supports.The first option is more autonomy, if a normal PC has replaced the laptop, a mobile stand can be easily removed from the computer table.The advantage stands on the pillars of furniture - is the installation at any convenient height for the user and ease of construction.It includes only a bottom and two side bulkheads without intricate lines and rounded corners.
• unit with drawers.Drawers on roller or ball guides - a great solution to storage problems of little things, paper, stationery, etc.Thanks to all of them that will not gather dust on the surface of the table and will be compactly laid out by various departments to always be at hand.

• cupboard with lockers .It is distinguished by a greater capacity than the compartment with drawers, so turn the computer table in the full-time jobs.This is especially important for children who are of such a table will not only play on the computer, but also to draw and do homework.At the same time placed in lockers textbooks, notebooks and other school supplies are always at hand.

Methods of making computer desk

In order to understand how to make a computer table, do not need any special expertise in the construction sector: it is enough to have basic skills handling of tools and lumber.Consider how to make MDF computer desk for children's:

• Take the MDF plate is not less than 16 mm thick.Measured parameters of space, which will have to accommodate a future computer desk: depth, length and width.Accordingly, detailed drawing is done in accordance therewith MDF sheet cut into pieces of the desired size.

• when "marginalia" right size ready, fasten them to the guides, which are mounted inside the shelves and drawers.
• Putting side modules using dowels, for greater structural strength, adding to the nest glue.
• to the back wall is better to use than the traditional chipboard and MDF sheet with a thickness of 10 mm.Then we collect all the walls in a single unit with the self-tapping screws with countersunk heads.
• Cut rectangular elements for drawers required length as MDF, 10 mm thick, and check the geometry of the sides by a polygon.Then, insert the dowels into the slots previously smeared with glue, clamps and sealed box.
• On the side surfaces of drawers skirting tape pasted by treating it with a hot iron.Without this edge during operation overheating computer and bubbles formed therein.After this edge trimming along the edge with a sharp knife.To the plate surface remained intact under the edge puts a sheet of thin cardboard.
• to the front and the back shelves slices glue strips of wood so that the shelves moved freely along the guide rails.For this purpose the width of the front edge of slats must be equal to 40 mm, while the rear edge - 16 mm.
• The bottom surface countertops marks the place where they will be fixed bearing pedestals and drilled blind slot dowels.There can not do without a depth stop, otherwise the hole with a high probability will be through.
• Put thumbs on the inverted table top and fastening them together 2 ribs by screws.
• Overturn table, screwed hinges and hung on the left side of the door module.Insert the drawer and pull-out shelves in place.

• superstructure of shelves, which is mounted on the table, attach using cable ties, so that it was easier to dismantle, if necessary.
• stand under the monitor is attached to the table top using a round wooden sticks, using dowels and glue.
• applied to the finished computer desk primer and then painted in any desired color.

If the room is a small place, and the usual shelf for the system unit hinders access to the computer, it is very convenient to mount the processor directly to the table.To do this, when you build include a special box, which is made of chipboard, pasted over Formica and edging having open ends.To avoid the risk of fire, inside the box was treated by impregnating the refractory.The desired thickness of the layer of chipboard - 17 mm, drawer side fasten screws size 4h60 mm countersunk head.Stiffness products provide the rear panel, recessed by 10 cm so as to obtain a special niche for cable and UPS.

Computer table in the interior

If the office interior computer desk always looked organically, its placement in the home living room design requires some talent to this furniture is produced not too strict, "clerical" appearance.Thus, the combination of a small table with a lamp, beautiful paintings and easy chairs, upholstered in bright cloth, with elegant headboard allows you to disguise such furniture for regular dining or desk.Harmonious looks and a table for the PC, which is a continuation of the shelf or wall.

If you make it to the set of shelves and cabinets unusual shape or decorate their patterns, the application of paint or carved wood, this piece of furniture would be handy in any home interior.