Butt tile and laminate : features design

In recent years, a method of combining two finishing materials in one coating gained considerable popularity.This design solution allows you to create an original design of the room and divide it into zones.One of the variants is a compound laminate board with tiles.This makes it easy to zone various segments of space.In this article we consider the features of this dock and the ways of its implementation.

Particulars of

docking coatings is often performed in both the living room and the kitchen.However, the scope of this technique is not limited.Quite common option is to design the space around a fireplace or balcony.It applied this technique and everything for vestibules.And near the front door, as a rule, laid tile, which is more resistant to moisture and is located on laminate flooring.

tile is recommended to allocate space near the sink, stove, kitchen furniture, washing machine.This material has a high degree of durability, resistance to mechanical stress, moisture and high temperature.Tiles can be easily cleaned of dirt, including grease.But it cover the entire floor surface is not recommended, because walking on such coverage is inconvenient.It's pretty slick and cool stuff.The laminate is more convenient in this respect.On tactile sensations it resembles natural wood, but it is significantly cheaper.Appearance laminate board is retained for a prolonged period.
can identify the following reasons for combining the two types of coatings:

• zoning space;
• visual increase in space;
• economy.Tile laminate is more expensive, so the use of two materials will help reduce repair costs;
• practicality.Application tiling will provide an opportunity to protect the places exposed to mechanical stress.

Joint laminate and tile.Photo:

processing method using thresholds

When combining coatings inevitably the question arises, how to make the joint between the tile and laminate flooring.One of the design options is the use of thresholds.They fall into several types according to the material of which are made.These products are divided into:

• steel;
• aluminum;
• wood;
• plastic parts.

more favorable performance characteristics have sills based on aluminum and steel.They are superior to products made of other materials for strength and durability.But they should be used only when working with metallic tiles.

for tiles and ceramics will be a more appropriate choice of wood and plastic parts.Wooden sills have high aesthetic values.Plastic products can simulate various types of wood, but they are inferior in terms of strength of wood.For this reason, they should not be used in areas with a heavy load.To make the most aesthetically pleasing to issue joint tiles and laminate, the nut should be selected under the color of the coating.
thresholds are also divided into categories depending on the destination.According to this criterion release:

• leveling;
• straight;
• completion elements.

products direct type are used for the protection and decoration of the gap between the covers that are on the same level.The problem lies in detail leveling correcting the difference between the coatings.With the final elements are made podiums edge.
Docking is as follows:

1. must be a minimum gap between the finishing materials.
2. edges in treatment is not required, they will be closed doorsteps.
3. In the clearance by the punch line or an electric drill holes drilled.
4. Next, use the plastic plugs attached nut.
5. Moldings can be hidden fastening.In this case, first set the bottom bracket, and then fixed nut.

Masking using cork

Joint tile and laminate can be issued without the nut, using a cork expansion joint.This product is very easy to use, becausesimply by inserting it into the gap.The advantage of such a plug is no need to leave the technological weld, because the compensator has the ability to increase and decrease in the size of 5 mm.

But when using this product, tile and laminate should be cut as straight as possible.Cork only fills the space, but does not hide the edge of the floor covering.Therefore, if the thread is made of poor quality, all defects will be visible.

Features of sealing means

to mask the gap is also used silicone sealant or assembly foam.Today on sale there are different shades of sealants that will pick up means for coating color.The sealing composition should possess a high elasticity to compensate for differences in the physical properties of the laminated boards and tiles.

The advantage of this method is the design of joints high strength and reliability.But the use of such means has a downside - the impossibility of repair work in the area of ​​the connection.In such a case you will need to dismantle the whole joint.

Imperceptible association

almost invisible connection laminate and tiles used for direct joints.The edges of the tiles and the board must be perfectly cut.A gap is left between the materials of 2-3 mm.Perform the dock can not close becauseit will trigger the destruction of the coating.And the finish may be damaged not only in the junction materials, but also a few meters away.Filled fugue mounting clearance for ceramics.The disadvantage of this tool is a poor adhesion with the laminated board in the future will have to be updated periodically putty.

Using mosaic

Joint tile and laminate can be masked using a mosaic.To do this, perform the steps in the following sequence:

1. first space is filled with a mixture of cement, PVA or composition, through which the laying of tiles.
2. Then, without waiting for the drying of the solution, you need to cover the surface of the mosaic.
3. Then wipe the area of ​​the gap should be.

Application mosaic will complement your home decor and make a note of originality.If you pick up the material in the color of the room mosaic strap is a continuation of the overall color composition.

Making arched joints

flexible joint between the tile and laminate flooring is made using a soft plastic or aluminum.Plastic is a T-shaped product consisting of two elements: a latch attached to a floor surface and decorative surface-flexible material which is placed in the retainer.This product is well bent.T-pad is also used at a level insufficient pruning.

Installation flex profile is performed in the following order:

1. between the tile and laminate must remain a space that will consolidate the molding to leave a gap of 5 mm.
2. Next in the seam hammer to drill holes for dowels.If the seam extends a warm floor, it is best to use liquid nails.
3. Then you need to cut off the desired length of the molding and attach it using dowels to the base.
4. When using a flexible cover profile it originally should soften.For this molding is placed in water at 70 ° C for 20 minutes.

Aluminium is a mortgage part, which is mounted at the same time with tiles.In contrast to the soft plastic can not be used to hide the rough cutting.Aluminum material is able to block only 2 mm.For sale this item in a direct form, using it to bend and give the required position.Working with aluminum requires a careful approach and care.To install an aluminum nut need to cut the required length of material and fix it in the seam area.

Tips for cutting laminate and tile

before a joint tile and laminate should be familiar with the material of cutting rules:

1. for cutting laminate boards do not require much effort.Performing this procedure using elekstrolobzika or circular saw with a fine tooth comb.In the absence of suitable instruments hacksaw or handsaw.
2. material must be put on a solid surface of the outer side facing up.Sawn board to gently, otherwise it chipped.
3. Cut tiles help tool called "Tile."But it is not at all, so you can use an ordinary glass cutter.
4. conduct them on the tile you should use a smooth object such as a ruler.It penetrates the material only 1 time.If you hold on a tile glass cutter repeatedly edge curves are obtained.
5. then you must break the tile.To this end, it is enclosed by a nail and make sharp depression.

docking Rules

joint between the tile and laminate flooring is recommended on the same plane.Theoretically laminate coating may be combined with the step, but in practice it would be inconvenient and could cause injury.To achieve the required plane must be carefully prepared foundation, and floor screed should be flat.The thickness of the laminate and tile nearly identical, the difference may be 1-2 mm.This difference is adjusted by means of the substrate under the laminate coating.

To compound the region had an aesthetic appearance need to fine trimming material.The width of the small decorative plates, so the low-quality cutting through them will not be able to completely hide the seam.The space between the two types of coverage shall not exceed 10 mm.Perform the dock without a gap impossible.Laminate changes its dimensions under the influence of temperature changes.If you do not keep the necessary distance coating will swell, and there will be a violation of the joints.Require special attention arcuate connection.

work to be performed in the correct sequence.Tile fit using adhesive mortar or grout, and exposure to moisture is undesirable for a laminate.It is therefore necessary initially to lay the tiles, wait for the complete drying of the composition, and only then start laying laminate coating.This sequence is due to one more nuance - laminate is easier to cut, so it is easier to correct than the tile.

Care Guidelines

1. Care laminate does not require special efforts.In order to maintain cover clean enough to perform Weekly wet cleaning.
2. in areas with high traffic, such as hallway or corridor, to cleanse you can use a solution of 4 liters of warm water and 2 tablespoons of shampoo.
3. If the laminate can be dimmed to remedy the situation by using the following tools.The containers need to connect 2 cups water, 1 cup of lemon juice and 2 cups of vinegar.The resulting composition is necessary to wipe the surface.
4. As a result, movement of heavy objects on the laminated board may be left scratching.Get rid of them, you can use ordinary eraser, which must be rubbed into the affected site.
5. Due to regular use of cleaning agents on the surface of the laminate can form a wax coating.Fix it will help the composition of 1 cup of vinegar and 4 liters of water.
6. Pollution on the tiles are removed with a solution of warm water and detergent.But for purification can not use hard or metal brushes to wipe the tiling should only soft cloth.

Conclusion

Association of finishing materials will divide the room into functional parts, diversify the interior and give it originality.But before closing the junction laminate and tile need to undertake appropriate training.The edges of the surfacing material should be smooth, for this you need to cut it with the observance of certain rules.

How to make butt tiles and laminate.Video: