Installation of plastic window sills with their hands

Mounting and fixing the plastic sill - this is very important and deserves special attention in the moment of the installation of any window.

sills plastic windows are not only an aesthetic function in the room, but also protective.Since aesthetics is clear - it's finished appearance of the premises, and additional space for placement of different items of decor.As for protection, window sills will prevent the formation of condensation on the windows, and the ingress of moisture from the open windows.However, the sill every day exposed to the adverse effects of: changes in temperature, sunlight mechanical loads.All these nuances determine particular installation and installation of the product.

materials of construction for the sills, are striking variety: natural stone, marble conglomerate, laminated particle board, artificial stone, etc.However, the most common materials are still the PVC and wood.To install a plastic or wooden window sill, you can use a number of useful recommendations that will find their way at all stages of the work.After reading this article, there will be no doubt that in the installation of plastic window sills with their hands there is nothing daunting.If there is a strong desire, perseverance and a good guide, then there is nothing to fear.

Advantages and disadvantages of PVC window sills

The advantages of these qualities include the installation of plastic window sills:

• resistance to moisture;
• not afraid of changes in temperature;
• quick and easy to install;
• does not need special care;
• lightweight design;
• can be any shape.

As for the drawbacks, it is actually not so much.Naturally, improper installation will cause certain problems, such as a window sill will wobble or tilt is too large.The problem can also occur with trimming edges.However, this is not material flaws, and incompetence of the master.The only negative feature - this instability to mechanical stress, that is, the plastic surface is easy to scratch and damage the hot object.In general, the installation of plastic window sills with their hands - it's always practical, cute and affordable.

Preparations

Tools and materials

to installation process more comfortable and not delayed, it is necessary to prepare in advance all the building inventory.The list below is easily adjusted to the specific situation and financial possibilities.Some tools can be replaced: for example, a hacksaw is an inexpensive replacement jigsaw.Optionally, buy all the tools, because in the future they may simply not be necessary or useful only once, so it is best to take the same jig saw or a hammer with relatives or friends.

So, in order to process the installation of the plastic sill not become burdensome and not delayed for a few days, you need to stock up in advance the following supplies:

• To bookmark a plastic fabric - wooden blocks.
• to putty the cracks - silicone or liquid plastic.
• For secure mounting - screws.
• for heat and sound insulation, sealing - polyurethane foam.

addition to the above and can not do without special scissors for metal, hammer, mount, building pencil, tape measures, screwdriver and punch.

Removing the old sill

At this stage, you should be very careful and in any case not in a hurry.If you come to this procedure irresponsibly and carelessly, it can easily destroy the slopes of the batteries.

To remove the old sill handy mount that you want to insert between the masonry and the boards and slowly pressed lightly shaking the window sill.It so happens that the board did not immediately amenable to mount, in this case, to destroy the lower part of the slopes are puncher.Then again comes in the mount.Often these actions is enough to get rid of the old sill.Occasionally, when he does not give in, and remains motionless, this case is useful electric jigsaw.Jigsaw is an inscription, and then again in the course is the mount.

Notice Photo plastic window sills, located below.

Trimming and marking

Sills plastic can be ordered as a ready-made, and of the installation, iecut product of a plastic fabric with your hands.To do this, it makes the right layout with a tape and the construction of a pencil.Often, window sills plastic windows are manufactured in standard sizes standard width of plastic window sills is 60 cm, which allows you to install them in almost any building.

initially measured the width of the window frame to the edge of the window opening.Then trimmed the window sill with a margin of two centimeters.Release sill is chosen at its discretion.Do not forget that too much projection may interfere with the normal spread of heat from heaters and lead to the formation of condensation on the windows.

The maximum length of the plastic sill - 3 meters, the width is allowed within 25-70 cm If the width of the plastic window sill is too large, simply cut off the excess..cut line should pass behind the stiffeners located inside the product, 0.5 - 1 cm. Then, the product will be well dock with the window frame.

PVC convenient jigsaw to cut than a hacksaw.In the latter case, you should be more careful and cautious in order not to damage the mother.Compliance with basic safety rules will be very helpful, so gloves and safety glasses is better to prepare in advance.

lining and fastening plastic sill

• concrete base on which to fasten the plastic sill, carefully cleaned of debris, then necessarily primed.The primer is needed to protect against mold formation.Putty cavities and bumps do not need.Of course, if the surface has large cracks, the plaster is needed.
• for backing necessary to put wooden blocks of suitable thickness, ie,to the sill kept exactly horizontal, not bent down, as often happens when the wrong assembly.It is better when the thickness of the bars is the same as that of the window sill.Bars will take the entire load from the window sill.
• At the same stage with the help of punch made slopes.Plastic sill should freely enter the groove and formed under the bottom edge of the window frame.Make sure that the design fits tightly to the frame.Bottom enclose wedges.
• adjusting the window sill, it must be secured with screws.This is done on the other side of the frame plate.
• space under the windowsill, niches in slopes blown professional assembly foam.the goods should be placed on the window sill before blowing the foam product is not lifted.
• foam is completely dry just a couple of days, so at this time it is better not to use the windowsill.Only after the complete drying of the excess foam with a knife cut off the building, and the remaining gaps and cracks are treated with sealant.
• Having passed all the stages of fastening plastic sill can proceed to the final finish - securing end caps to glue.

Results

dealt with the issue of how to fix a plastic windowsill with his own hands, it is clear that this process has a number of subtleties, to lose that in any case impossible.Do not forget that the attachment of the plastic sill - this is the final stage of installation works of plastic windows and that it determines the appearance of the entire window.If you cancel the installation of plastic window sills, it is not only uncomfortable, but also the overall look of the room is lost, and the repair will look incomplete.

If this manual is not enough to work on their own, that is, more and visual information in the video installation and installation of plastic window sills.

Installing plastic window sill: Video