Dressing of plasterboard with their hands

In each house, sooner or later, there is a problem of placement of things accumulated over the years that clutter living space, prevent and create a sense of confusion.To sort all this chaos, it can be fitted in the home dressing room, if available space allows.

But, allocate an entire room for such purposes, may today not all, though dreams about it, probably, the majority of the female population.

To dream does not remain unsold, you can make a dressing room with his hands Plasterboard.For a man who has experience of working with this material, the embodiment of this idea is not particularly difficult.This article is designed to answer the question of how to make dressing plasterboard simply, quickly and cost-effectively.

Functions dressing

First of all, it should indicate the main functions assigned to a practical construction.

1. Ordering and ordering things storage. This is the main function of dressing room of plasterboard.Since its creation some order is brought into the process of placing clothes in storage.You no longer have to search for one or the other thing throughout the apartment, all will now have their place.
2. Elimination of clutter in the main areas of the home. This "second side of the coin."Not only that, the clothes will be in its place, it will also disappear from the backs of chairs, sofa armrests and other places that are not designed for such use.
3. Save space.With the advent of dressing vacant section of cabinets and drawers that were overcrowded.Perhaps some of them you can even remove.In place of the old cabinets swinging flaps come sliding door, which is also effective in the fight for space.
4. decorative function. apartment, fitted wardrobe, is cleaner and more spacious.The outer part of the design usually gets off to a stylistic way to other parts of the room.

place for dressing

now examine carefully where exactly in your home dressing room can be arranged.Here are possible options for its location.

1. impasse of the corridor. Very convenient if a dead end corridor.It can be safely insulated from the residential part of the house, and the rational use of this area, equipping her dressing room.
2. Nishi. Availability niche - this is a chance for those who want to arrange a dressing room in a small apartment.In this case, it should be understood that the size of the structure is strictly limited dimensions of the grooves.
3. balconies and loggias. As another accommodation option dressing room, balcony or loggia to help keep the area pristine living rooms.It is only necessary to note that the balcony should be well insulated.Otherwise, there is a risk that the design of the wall will be deformed by high humidity.Yes, and what kind of preservation of things in such a place may be involved.
4. fenced off part of the living room. If your apartment is not observed any of the above benefits, you have to sacrifice space available facilities.A good compromise may be a corner closet of plasterboard.Such a model "consumes" less space and allows you to use the space in the corner, which is usually empty.An example of such a dressing of drywall you can see in the photo below:

But, more often, it dressing traditionally constructed from drywall in the bedroom (it was convenient to change) or the entrance (convenient proximity to the entrance doors).

Filling dressing

internal content can be different, depending on the needs.But, nevertheless, there are a number of standard modules, which are typically used to create a walk-in closet.

1. crossbar with trempel.In this part are placed dresses, coats, coats, fur coats, and more.
2. lower section for storing shoes.It can be one or more shelves or special boxes.
3. upper section to accommodate headwear and accessories.This regiment is divided by partitions.The resulting cells can be placed containers or drawers, which is much more convenient to keep the "small things."

Required tools and materials

1. Sheets of drywall;
2. Metal profiles;
3. level;
4. Mineral wool (if you decide to do the insulation);
5. screwdriver and screws;
6. Punch and expansion;
7. knife to make plasterboard desired shape;
8. Putty and trowel;
9. Primer.

Procedure

drawing Performing

In the extreme case, draw a simple plan showing the dimensions.If you have really bad with the geometry and drawing, it is better to involve the implementation of this phase of someone more knowledgeable in this matter.The correct figure - half the battle when you create any design.

Layout

Make a pencil mark the construction of main units, based on the dimensions shown in the drawing.For the convenience of the location of the profiles can be marked with tape.

Mounting frame and paneling

1. Attach to the wall bearing the bar plugs, check its horizontal using a spirit level.
2. Insert slots in its vertical profiles with brackets, which are attached various shelves, hooks and crossbar.
3. Slide them, keeping a distance of 60 cm and secure.
4. Attach the guide profiles to the ceiling and the floor, using a hammer and dowels.
5. Insert bearing profiles uprights, parallel to that fixed to the wall.
6. Fasten shelves on the brackets using the screwdriver and screws, set the bar for trempel, hang hooks.
7. Using a knife, cut into sheets of drywall the required size and shape.
8. Attach screws drywall sheets from the inside of the frame using a screwdriver.
9. Before construction sheathing on the other hand, can be laid a layer of mineral wool, which will provide heat and sound insulation dressing room.
10. Take care of the publicity. It's time for wiring, if such a project is provided.Ideally, the wall on which you make the dressing, there is a ready outlet.Then you can simply choose the appropriate lamp and turn it on.With no outlet, it will have to do.Here it is better to call for help electrician.With it you can discuss the possibility of installing and spotlights in the ceiling or in the shelf area.
11. Sew construction drywall sheets on the outside by screwing them to the metal profiles.If no wires inside the frame, and the project does not provide additional insulation inside the dressing room, you can not bind and simply papered or painted.

Installing doors

most suitable for this design is sliding door.Often it is made mirror.Revolving doors are not suitable in terms of space savings.Many people prefer to just hang at the entrance to the dressing room a spectacular curtain of dense tissue.

finishing construction and equipment within the territory of the dressing

1. Treat joints and seams GCR (ideally, the entire surface) filler.
2. Apply on the entire surface of the walls of a dressing primer.
3. Proceed to the finishing.

As for the final stage finishing cardboard-gypsum walls, then there are several options:

• painting;
• pasting wallpaper;
• trim a tree.

Choice lining should be based on a combination of the basic décor and furnishings of the room.The outer walls of a dressing room should be a logical continuation of the main walls of the same finish visually increase the room.The inner surface is better to perform in neutral pastel colors, colorful dresses, shoes and handbags, and so make the room colorful.

about filling the insides wardrobe mentioned above.The quality of the material and configuration of elements is entirely dependent on your financial possibilities and taste preferences.

If desired, you can decorate your own containers and boxes.Decoupage, decorative painting, patchwork, and many other fashionable decor trends have been extensively described in the network.In the new room must be present full-length mirror.It can be hung on the wall, and it is possible to make the mirror surface of the sliding door.

If space inside the structure enough, in the middle of a dressing room (or corner), put the ottoman.These elements will help make fitting clothes and shoes the most comfortable and enjoyable.By the way, an ottoman can also be made hollow, and stored inside the belts, clutches and other small things.