How to make a folding wooden table with his hands

Sometimes, it is better and cheaper to manufacture a folding wooden table with his hands than to buy ready-made.In this case, it is possible to set the required size and use high-quality materials.Sturdy wooden dining table folding, solve the problem of organizing space and free space in the kitchen or living room.

Very convenient and popularthe apartment is a table book.It perfectly copes with the function of a large dining table and in the assembled state takes very little space.To produce such a table with his hands takes very little time and materials.

Extendable dining table made of wood

detail and preparation for the assembly of a folding dining table

1. Canvas for countertop folding table is better to buy ready-made.You will need three components.Two paintings chipboard size 450h750 mm and a detachable part 400h750 mm with a standard thickness of 18 mm.Cutting size can be right in the store.In the same place you can buy melamine socket flexible tape in the color of countertops.The edge is welded to the end of a hot iron, and attain to the level with a sharp knife for drywall.
2. countertop can be ordered from veneered wooden boards.Wood suit any - pine, beech, or the more expensive solid grade.In this case, you want to further process the countertop stain and varnish.The legs are made of timber 45x45 mm.In the carpentry shop you their protochat on mowing.The lower you can set the size of 25x25 mm.Sample table height - 735 mm, and the height of the legs in this case is 715 mm.
3. For framework and foundations need plywood folding table 20 mm thick planks - 2 pcs.on the sidewalls of an end 830h120 mm and 4 pcs.on longitudinal sidewall frame 420h120 mm.Yet you need wood screws (4x50 and 4x16), dowels and 8h30 furniture and metal corner 30x30.To purchase a table layout mechanism withdrawable guide.These are used in the drawers.It will take two right and two left rails 300 mm long.
4. recommended to polish all the details, soak them stain and varnishing before assembling.After drying the varnish, the details again oshkurivayutsya fine sandpaper and re-opened varnish.

assembly folding dining table

1. From bars going rectangular skeleton frame, end pieces and strips are fastened, guided by the extreme level of the sidewalls.The legs are fixed with screws in the corners of the box, reinforced with metal corners and finally clamped ties.
2. sliding part of countertops, exposed on the frame plane, made notches on the mating surfaces and drilled holes for dowels, diameter 8 mm standard dowel hole should be no deeper than 25 mm.Install dowels on PVA glue in a checkerboard pattern.Boring machine on high countertop installed, focusing on the main table top halves.
3. of boards designed for countertop, going two U-shaped frame.They are the foundation and framework for guiding rails are mounted sliding mechanism.The runners are the right and left-handed, pay attention to it.Divide them into two parts, the general guide is mounted on the side wall of the stationary frame and narrow - response runners on U-shaped movable part countertops.Next, runners snap into the grooves, and ease of movement is checked.The axes have guide adjusting screws.

Table - book with their hands

By folding table Transformers true table - book.It is very convenient and practical option folding table.Make it your own hands can be for one day, it does not take up much space in the assembled state and can be used as a full pull-out dining table.

1. By drawing (see. Photo) is a detail.For the production of the book table, make better use of chipboard.Cutting the workpiece can be in a store building materials, so-end sections will be much smoother and cleaner.For countertops need two plates 70.5h80 cm in size and one 35h80 cm. All moving parts, including the pull-out support legs, mounted on piano hinges.
2. optimum height of the table -. 75 cm From this size, harvested timber 4x4 cm, 2x4 cm rake for legs and frame transformer table.For the sides, cut out of chipboard two Boards size 35h73 cm.
3. end faces are decorated with melamine edge color-matched surface countertops.Edge 2 cm wide is applied to the end countertops and ironed with hot iron.Speakers excess welded edges removed sharp knife assembly.
4. Box main core portion is going to SCREW.5 mm drill, partitioning, planar boards are drilled in the through-holes, and in the end to a depth of 50 mm.On the plane chamfered holes drill 8 mm to konfirmat head is flush with the plane of chipboard.Then she disguised special plastic flap.For the stability of the frame box, set side-bar or furniture made of metal angles at the corners.
5. frame is placed face down on the floor and across the width of both sides is attached with small screws solid piano hinges.It provides the right and left wing countertops and secured with screws from the back side.
6. Before you start to make the legs to book a table, a bar and rack must be sanded, promo below the main table color and varnish.From timber 4x4 cm, made a pair of U-shaped legs.For strength and stability of the slats 2x4 cm, inserted oblique diagonal or straight cross member and the locking side-bar.One of the vertical sides of the legs is attached to the frame duct piano loop.

For a better safety, all bearing surfaces can fill a small plastic heels.There is an option when the folding table book put on the roller feet.So it is much easier to transport the apartment.