Arena for the child with his hands

time comes and lies peacefully in the crib child learns to crawl, stand up.Parents are beginning to follow and no longer leave him alone.Dad can give your child the security of travel and design the arena with their own hands.As practice shows - it is a simple process that requires no special knowledge.Follow the instructions and pre-prepare the material and tools.

Baby playpens.Typical designs

Species playpens much.According to the configuration, they are divided:

1. Square.
2. Square.
3. Hex.

On the perimeter fence:

1. Wooden fences.A preferred embodiment.Material eco-friendly, durable, long-lasting.Disadvantages: in the fall, and hitting the wooden lattice may be injured.
2. Grid.Light, soft, smooth out bumps, softens the fall.Disadvantages: the baby can get lost fingers in the cells.

By destination:

1. Game.It is used for the development of motor skills in a child, as a temporary fix for a few hours.Industry produces these products with various forms of modern and classic materials.The bottom of the arena obbivat rubberized cloth plaschevka.The average price of $ 67.
2. crib-playpen.Producing two types: wood and mesh.Wooden make fixed or folding, hinged to the front wall, with the possibility of adjusting the height of the rim.Picked arena considering the child gets older.This sleeping playpen baby will sleep up to 3-4 years.The advantage of this type is the high stability of the structure.The disadvantage: the material is handled poorly hygienic means.The average cost of $ 100.
3. Screen.Placed depending on the size of the apartment and preferences of parents.Basic functionality - temporary fence.It is convenient to create a safe passage for the baby in the apartment.Masks and protects the child from entering dangerous areas: stairs, fireplaces, office equipment.The average price of $ 40.
4. Inflatable.It has a seasonal destination.It is made from food-grade plastic or rubber.Brightly colored, whimsical shapes.Convenient for trips with a child on the nature, the sea, the cottage.The average price - $ 20.

For small apartments rational arena serves classic cot, fenced round wooden rods.Tough design securely holds the beginner to get up baby makes the first steps on the perimeter.

How to make your own folding playpen, hexagonal

arena size is selected independently, the size depends on the capabilities of the total area of ​​the apartment.Recommended height of 75 - 100 mm.Height plays a protection from the loss of the child from the crib.Growing up, he learns to throw a leg, leaning over the edge.High fences are not present him this opportunity.

to design the frame you need the following materials:

1. Bars hardwood: birch, alder, aspen, maple.These rocks are characterized by an average hardness, easily handled and cut off.Have a nice natural color, calm, non-irritating eye.Recommended size - 15h50h1000 mm.The amount of 12 units.Before you buy wood is checked for quality: good drying, no roughness and defective places, the lack of a bluish bloom.Not dried out bars during operation will lead and warp.The blue on the wood means it stale in the damp.
2. For grating round bars with diameter of 10 mm.The amount of 36 units.Wood species selected in the previous paragraph.
3. bolts and nuts with a diameter of 5 mm.Connecting elements selected from a smooth metal surface.Speakers over the bar head should not otsarapyvat children's hands.Material bolts selected taking into account environmental and safety for the child's health.
4. Self.
5. Sandpaper Wood: №0 and standard.
6. dense construction PVA glue.
7. varnish or paint without organic solvents, water-based.For example, AZ 2130/00.The capacity of the nail is white, looks like a thick milk pudding.Drying up, it becomes clear, creating a surface protection against mechanical damage and without masking the natural pattern of the wood.

To work necessary to prepare a set of tools:

1. hacksaw on wood with removable cloth.
2. Jigsaw: manual, electric.
3. Power drill and set of drills with a diameter of 5 mm and 10 mm.
4. brush for applying nail polish.

Arena is going to of separate sections, bolted to the uprights.Convenient and mobile design allows the folded bed for transport, remove for cleaning or repair.

How to build a playpen with folding sections

Start the assembly with the side walls.In our case - of 6 pieces.

1. trim the ends of the bars for bars, achieves the same length.The extra centimeters are cut down.
2. Take sandpaper №1 and is used for sanding of bars.
3. Hand checked smooth on all sides.
4. Take sandpaper №0.We clean every bar to perfect smoothness.
5. The same operation is done with bars for grating.

assembly sections:

• Select a bar for the lower crossbar of fixing racks.Apply markup rack installation locations and cylindrical lattice bars.
• make the markup given the coincidence of parts vertically on the upper rungs.
• Drill drill on both crossbars through-holes connecting bolts.
• drilled by jack rods lattices.Hole depth - until the middle of strap.The distance of bars is selected to 100 mm.Caution: the kid can stick her head through the wide openings and cause injury.The ideal setting of the gap, checked more than one generation of parents and children, is 70 mm.Not good and too frequent grille.Baby pushes its pen or a leg and can not get back.

Tip: The desired slot depth is performed as follows: to drill, drill parallel to the strap attached to the 7 mm shorter.7 mm - is the size of half the thickness of the crossbar.The drill, having a depth of 7 mm, strap rested in the bar.

• walls of the recesses on the bottom rung are coated PVA glue.
• ends of the bars are inserted into the lower slot.Fixed until the adhesive has set.
• promazyvayut deepening upper limit.Connect the ends of the boards.
• collected six sections are put up for drying in a warm, well-ventilated place.
• assembly fixing racks - an important process works: the rack rests on the construction of retaining function in a vertical position and horizontal when folded.To strengthen, enhance stand under an elevated load, glued glazing beads reinforced with screws.

going ready design:

1. through-holes large bars aligned with the through holes small bars.Produce bolting.
2. varnish, water-based cover all the wooden parts.Kid wants to taste the upper parts of the arena, so the coating is selected taking into account the hygiene, health and safety of water resistance.

As proposed instructions made a big arena.It is able to fit both kids 2-3.

Tip: do not let us into the spacious arena big toys.Resourceful child will lay at the bottom of the toy, it will rise and fall risks.

How do playpen classic design

1. Select the optimum maximum size beds with a view of the room size.The area of ​​the arena is important for the development of motor skills and reflexes in children.It is best to move the furniture and make room for a cot extra part of the room, what to save and build an awkward narrow or short box.
2. zagotovte materials:

• bars hardwood trees: birch, maple, alder.Diameter 30 mm;
• bars for grating diameter of 5-10 mm;
• electric drill;
• hacksaw on a tree;
• construction tape measure;
• primer for wood, water-based;
• sandpaper and №0 №1;
• varnish, water-based paint;
• pendulum loop double action with a wide shelf;
• latch.

3. From the main dimensions of a special attention to the selection of the height of the lattice.Grew her child make 100 - 70 cm distance between bars selected optimal security: 70 mm..

Tip: if possible, make an arena of heavy materials, combine metal with wood, for example, to the lower metal strips fit square or round tube, metal rods.Heavy playpen will not tip if the grown up kid be piled all the weight on one edge.

4. Measure the selected size on each bar, cut off the excess part.Prepare 8 pieces: 4 pieces on the length of the arena, and 4 pieces for the width of the arena.From the same timber fabricate uprights at each corner.

5. On the upper and lower horizontal rails are not drilled through-holes for the bars, to a depth of half the thickness of the strips.Matured match the holes on both surfaces.

6. grinding surface rails for ogorodki.It achieves a perfect smoothness.

7. covers all surface primer.Dried.

8. the bars are inserted into the recesses Realized.First mounted on the lower bar and then the upper.

9. Side racks are fastened together with bolts and bolt corners.At any given structure can be disassembled for transportation.

10. pendulum loops connect adjacent wall in pairs.

11. Set the latch on the other side.Shpigalet or secure the hook.

How to make no playpen lattice

For small apartments ideal arena for the child will be a mesh box cot.He is mobile, has a compact design, a secure fence.Amortized and softens the fall of the baby.

Materials and tools for the arena:

1. synthetic mesh.
2. Plexiglas tube.
3. Hacksaw / jigsaw.
4. Tailor scissors.
5. Roulette.
6. Mel.
7. sewing machine.
8. Colored thread №10.

Dimensions playpen with mesh are selected based on the capabilities of apartment space.Choose the size, buy in the store a synthetic mesh.Requirements to the material grid:

1. color: soft, quiet.Recommended child psychologists color - off-white, light beige, pale pink blur, light of heaven.Baby for a long time will look at this grid, the lens strain or experience pain in the eyes, if you choose an acid-bright gamma.
2. Selectable grid with an average cell size.The largest - the child confused, try to push the knob-leg of the toy and the material is wound tightly on the skin.Small - make the kid to get nervous and feel a sense of loneliness, will impede a visual overview.Recommended mesh size from 20 mm to 35 mm.
3. Synthetic mesh thread chosen medium thickness.The thread is not folded, one-piece, no fishing line or metal inserts.Very thin thread will cut delicate skin.

design Build:

1. of a plexiglass tube with a hacksaw cut segments arena in selected sizes.
2. done grid pattern to one side for a square arena.On all four sides left a large margin for kulisok.In kuliske prodenutsya tube.
3. Pattern placed on the mesh fabric is outlined with chalk.Carve the first side.
4. kuliske wrapped with four sides, a strong crosslinked fine stitch.Threads for sewing take the color of the material.In
5. ready kuliske inserted tube.According to one at the top and bottom.Then threaded into the sidewall of the tube.Correct tension of the material, sutured or dismiss, setting tight position.It turned out the first wall of the arena.
6. Carry out the operations described above for the preparation of the remaining three walls.
7. in mesh fabric for fastening pipes to make holes in diameter Plexiglas.
8. collected walls between them.
9. for strength and safety joints turn into a soft material.For example, sewn removable pad.

Manege of the grid will baby bedroom and place to play.