Decorative beams made ​​of polyurethane : instructions for the production of

Using decorative beams made of polyurethane allows you to hide minor imperfections walls or the ceiling and at the same time to make your home decor exquisite and original.On peculiarities of the use and manufacture of polyurethane beams consider further.

beams made of polyurethane: the benefits and use in the interior

beams of polyurethane made under a tree, in appearance no different from ordinary wooden beams, although in practical terms, have a number of advantagesbefore them:

• easy weight - polyurethane lighter material than wood, so these do not load beam design, they are easy to install and well kept on the ceiling and walls;

• presence of empty space inside the polyurethane beams allows you to hide minor irregularities of surfaces on which they are installed, such beams are well placed communication pipes and wires;
• installation polyurethane beams does not require special knowledge and special tools;
• beams made of polyurethane are resistant to moisture, temperature changes, UV;
• data beams are completely fireproof, so provide a full fire safety and involve them in the installation wiring.

Installing multiple decorative beams consoles and fastening their belts will create excellent interior in country style.This type of decorative finish fills the room comfort, style and romance.Special fixing beams on the ceiling and on the walls, enlarges and expands them.

Beams of polyurethane Photo:

of decorative beams allow to decorate almost any style of room.They are mounted on a ceiling or on the wall.With the right approach to the choice of colors and beam structure and the room becomes a luxurious holiday.

classic style of the room, which implies the presence of angles and lines well with mild beams of colors as black or brown.The texture of them is missing or imitates a tree.

If you have a classic interior openwork decorative elements, it is recommended to install the beam finished with artistic painting or carving.In addition, not be amiss to their decoration with paint or decorative plaster.

Modern style directions such as Art Nouveau, or high-tech using decorative beams with a smooth surface, made in bright colors.With beams manage to dilute and revitalize monochrome interior.

country style of Provence, or involves the installation of dark or light beams made of polyurethane, which is very well mimic wood.

addition to the above advantages of polyurethane beams should be noted:

• lower cost, compared with the beams made of wood;
• the possibility of fixing beams on construction of plasterboard walls and fragile, since the weight of this design easier;
• such beams, unlike wood not exposed to fungus or mold, they are more durable and easy to care for;
• beams made of polyurethane different lots of color and texture palette.

Functionality beams made of polyurethane wood

beams made of polyurethane also called false beams, as they are able to fully simulate the desired texture.Functionally active material has several purposes.He is good at hiding small defects surfaces but this is the place for the installation of communications in the form of wiring, air conditioning, etc.

Stylistics country involves the use falshbalok.These materials can decorate not only premises, but also look great in public places, such as cafes, bars and restaurants.

Polyurethane wood is able to imitate oak, spruce, pine, beech and other species of trees.With the help of these beams is made possible imitation of an ancient castle, rural life, or tavern.

as additional items that are on the surface of the beams are the belts, forged bars, which are located on the rivet.The room with exposed beams and rustic looks more soundly.

Falshbalki polyurethane - especially installation

Installation falshbalok polyurethane begins with marking works, the surface to which they are attached.It is necessary to designate wedges, fixing the beams.

beams used for fixing rails wedges.Required for their production tree, which exactly replicates the cavity of the beam.This cavity has a trapezoidal cavity and is similar to the shape of the beam.For fixing it requires a dowels and screws.They fix a wedge beam through the central and side portions.

Installation wedges made at intervals of one meter, so the implementation of marking paint is not only a place boards installation, but also the path of the beam assembly.

During installation of the beam on the surface of the wall or ceiling must be pre-applied adhesive for use with polyurethane materials.This procedure not only provide fixation, and no gaps between the girder and the wall.

Next comes the installation false beams on the wedges and their bond with the help of screws.At this point you need to put labels on the sides of the wedges.Decorative strap or belt to help close the place beams with fixing timbers.If necessary, thus collect a few beams into a single hinged design.

When false beams assembled to begin installing the console, the data elements are optional and perform a decorative function and mimic her helpers.

Pay attention to the presence of the correct lighting, as beams of polyurethane inside the empty, they assume the installation wiring and recessed luminaires.As previously mentioned polyurethane is fireproof material, even though it has a certain temperature range from -55 to +75 degrees.Therefore, power fixtures, which is installed in the polyurethane decorative beams must not exceed 0.5 kW, so as not to provoke the melting and crystallization of the material.

When installing the wiring inside beams is recommended to use a protective cover, such as a corrugated hose.Note that if you need to install wires or other communications, in a wedge-bars pre-drill holes.

diameter of the corrugated thin cable channel of one centimeter, so the minimum hole in the wedge-Canter was 1.2-1.5 cm. To install fixtures holes cut with a knife, in relation to the diameter of the cartridge console.

Tip: When making the wiring of electrical wires in a beam of polyurethane use corrugated metal cable channels.Since the plastic cable channel, in the case of a short circuit occurs inside surface beam melting.

To make a parallel connection point type lamps made special hinges, perhaps their structure in combination with a corrugated hose.In the context of the loop, the extra areas cut flutes.

Decorative beams made of polyurethane under a tree with his hands

independent production of polyurethane decorative beams involves premixed polyurethane.This material is highly durable and operation duration, so the beam from it will last more than one decade.

To produce the polyurethane polymer requires the presence of the house marked UWC - PFL - 100. The main difference from alternative polymers - no foaming on contact with oxygen.

This material is sold in packaging by weight is expressed as a hardener or kuratona Kuramin.In addition you will need the presence of an adhesive lubricant, which prevents the adhesion of polyurethane to form.

After purchasing the necessary materials, tools need to be prepared in the form of:

• weights with weights;
• set of empty cans made of metal;
• building or household dryer.

surface to work should be smooth and clean.When working with polymers, note that they are unstable to moisture, so it is not stored for more than 30 days in a dry place and sealed containers.For long term storage is required periodically dry polymer mixture.

Start with the preparation form.To do this, first determine the type of beam which will be manufactured.In the manufacture of polyurethane semicircular beams with their hands need to have such diameter plastic pipe, as the two beams.This tube is cut in half with a hacksaw, and stripped the edges with sandpaper.The resulting segment will beam.Thus, if it is to re-use, it is required to lubricate the surface with a release tape.

Before the main solution preparation, it is better to practice a few times in small batches, fabricate, for example, decorative elements to the beams, and then the beams themselves.Warm up the bank and clear it from moisture, if any.Pour it in the polymer mixture and calculate its weight, excluding banks.For example, the polymer weight is 1 kg, while this amount of material required seventeen percent curing agent, ie 170 grams.

Add the polymer in a jar, and a curing agent to another, and then warm up the two banks with a hair dryer.Their temperature should be at 125 degrees.To determine the required heating temperature look for hardener and resin, if they have the clear liquid consistency, it is time to stop heating.Hold them at that temperature for about 30 minutes and then depress it to sixty degrees.The polymer at this temperature is quite tough, but barely warm to the touch.It is recommended to take the cloth to the mixture as it is in a heated state rather stick to hands.Gradually heat the hardener and just blow it in small portions into the jar with the polymer, while using a wooden stick for mixing.This should form small bubbles, so do not rush to mix resin and hardener.

When homogeneous mass will leave it for a few seconds and start pouring it into a mold.Note that when it is necessary to continuously heat the finished mixture.

After the spill, wait about 30 minutes and then heat the finished mixture to 100 degrees temperature, and this temperature must be maintained for a period of two to six hours.Cool stuff to fifty degrees and remove from the mold ready to beam.Leave parts warm for several days, preferably for one week.To extend the life of their beams cover the outer part by means of liquid polyurethane.

In addition, you can use the oven instead of a hair dryer, since with it is very easy to heat the material to the required temperature.It is recommended for the manufacture of vacuum Blending, which will help speed up the process of polymer compound with a hardener for continuous manufacture of polyurethane products.

carry out the procedure in the absence of extraneous if doing polyurethane beams in the room, then take care of the stock exhaust or a good natural ventilation.

beams fastened together with glue for polyurethane products.Make a few cuts on the surface, to help simulate the beam of wood.The variant of the painting surface.

imitation beams Polyurethane beams involves the manufacture of the foam.This requires the foam used in home insulation, the thickness is 5 cm. Cut it so as to obtain the desired beam size and shape.cut portions connect together using nails or liquid adhesive.Take on the surface of a few nicks, cuts, cut, thus will mimic the surface of this beam.Using putty zashpaklyuyte surface, fasten in place and paint in the desired color.

decorative beams made of polyurethane - especially

Polyurethane is a versatile material that takes on any shape, size and texture.Therefore, manufacturers produce a beam differ not only in thickness and size, but also on the density.

Polyurethane is able to simulate wood, metal, while wood imitation polyurethane beams allows to make under any sort of wood, such as cherry, beech, oak, plum, etc.

Each type of polyurethane wood beams different in hue and saturation.The most common sizes of beams are 9h6 model, 6x12, 12x12, 19h17, 20x13.beam length is from two to five meters.It is also possible to order polyurethane beams under the order.

Note that unpainted beams made of polyurethane are two times cheaper than painted.