Bunk bed with his hands

Bunk bed has not only a utilitarian function to save space in the apartment, but it is entertaining and a play corner for children and adolescents.Originally thought-out design with intricate and romantic decor turns going to bed a child in an interesting adventure.

Manufacturing of furniture in the home has become increasingly popular.Produce unusual and beautiful bunk bed with his hands is not difficult.It is not only original, but also much stronger than store-bought.

Even if you have yet one child, the first layer can be used as a play corner or a place to study.In the corner is located the computer desk and chair.The lower tier can be made and a double - for adults.It all depends on your creativity and imagination.

Preparations

1. begin preparatory work for the production of children's bunk bed with his hands from the acquisition of mattresses.Given the fact that the bunk bed should last for more than one year - a good buy mattresses with dimensions 170H65 and the density of the upper layer 35 m / kg3.
2. Based, is a schematic drawing of a bunk bed set mattress sizes.Estimated height should not be less than 1800 mm, add the thickness tolerance of the boards used for the bed to the length and width.Having defined the overall dimensions of the children's bunk bed, select a suitable place in the bedroom for her.

Materials and tools

1. examining the detailed drawing of a wooden bunk bed - easy to calculate the required amount for its production of sawn timber.
2. For struts need 4 beam length not less than 1800 mm and large cross-section of 50 mm and more.
3. carcass under the mattress - 4 boards and 4 1800H150H30 - 750H150H30.
4. For ladder to the second floor - 2 boards and 1800H150H30 kruglyash diametrom30 mm steps.You can buy a regular shanks for shovels.
5. Thinner board for guard, plywood 10 mm and rack size and the amount of which determines your selected design.
6. spy on the information you need about how to make a drawing of the children's bunk bed can be in the photo on the Internet.
7. From tools you need to set a standard carpenter: jigsaw, screwdriver, drill, brushes and supplies (screws, sandpaper, glue, bolts of 8 to 10 mm with nuts and washers, paint, etc..)

processmanufacturing bunk bed

1. The size mattresses made two rectangular frame.The work requires precision and strength of the structure.Pay special attention to mounting angles.
2. most reliable and durable connection is SH- shaped corners.For this jigsaw on the front side of the board cuts are made of 20 mm width and depth of the thickness of the board.Grooves is a chisel or a chisel.Spikes and notches to be connected in a staggered manner and sit on the carpenter's glue.
3. This connection is further fixed vertical wooden spike.Drill a hole through sewn eyelets and studs and wooden wedged round stopper.
4. The bottom frame sewn lock plate and timber is made of 2 - 3 transverse stiffeners.To enhance the reliability and design applied metal corner.
5. of plywood, a minimum thickness of 10 mm, the internal dimension of carcases cut substrate under mattresses.
6. Make markup height and level to support the racks and install the frames.Secure the bolts can be pre-drill the hole or furniture evrovintami (SCREW).
7. On the upper tier perimeter sewn protective rim of the rail.In the foot, or the end portion of the upper tier to contemplate a manhole ladder.
8. ladder for bunk wooden bed is very easy going.Centered 1800H150H30 mm boards is counting in increments of 25 - 30 cm. Fountain drill - 30 mm in diameter are drilled through holes.Sliced ​​kruglyash steps to the desired width.Ladder going glued and fixed to the frame with screws in the lower and upper parts.

Other children's bunk beds

Metal beds

Produce metal bed with his hands, even easier than wood.The frame base is assembled from 45H50 corner.For the main risers used pipe diameter of 1 inch.Mechanical byltsa and skirting the boundary to the second level, can be ordered in a workshop for the production of gratings.The whole structure is fixed by welding or going to bolt.

Retractable bunk beds

1. To make such a bed alone - the most difficult.It is necessary to have some skill in the assembly and installation of furniture.For withdrawable bunk beds - Transformers, need a lot of special furniture accessories.
2. lower platform can be on wheels, and it is important to choose the right rails - rails.

Folding bunk beds

1. very original solution - mounted folding bunk beds with their own hands.Thus, the mass of the released free space during the daytime.
2. Particular attention is paid to the system of fastening and stoppers - lock.Set a hardware and fasteners, it is better to buy a furniture store.

brief overview of how to make a bunk bed with your hands can be seen in the accompanying video.