Folding chair , chaise longue : instructions for the production of

The manufacture of a folding chair-chaise-longue has a lot of advantages, as the final product acquires those forms and functions that are necessary for its owner. In addition, it will cost much less than the purchase, and its design will fit into any interior. About how to make a chair-chaise longue with their own hands and talk.

Advantages in using the chair of the

chaise lounge This piece of furniture combines two functions: the opportunity to sit - from the chair, and lie - from the chaise longue. Before starting to manufacture it, we offer you to familiarize yourself with the main advantages of the chair-chaise longue:

• Excellent and almost irreplaceable object for a summer residence, which will fit into any corner of the courtyard.

• Some models add up, while taking up very little space. This feature makes it easy to transport an armchair from a holiday home or take it with you to rest, for example, at the sea.
• Relaxation is another undeniable advantage in the use of a chair-chaise longue. Rest on it calms the nervous system, relieves stress and pacifies. This subject is great for reading a book, watching the nature in the garden or at the river, get a good night's sleep.
• The originality of the exterior of the lounge chair will help decorate any room or yard. Moreover, when making chairs with their own hands, there is the possibility of choosing its colors and design.

Wooden grille in the base of the lounge chair: features of the

This model is used not only as a chaise longue, but also as a bed. It has a flat surface and has an adjustable back. The main disadvantage is the difficulty in transporting it.

This chaise longue is perfect for relaxing both at sea and in the yard. To produce it, you will need:

• glued spruce boards, each 1.8 cm thick;
• wooden beams with a cross-section of 4.5x4.5 cm - used in the construction of the frame;
• boards with which the sides are lined, their thickness is from 2.5 cm;
• of electric jigsaw or screwdriver;
• drill for working with wood;
• four furniture corners;
• several dozen screws with the presence of secret heads;
• four rollers up to 10 cm;
• sanding sheet with fine granularity;
• varnish or paint for finishing.

For the purchase of plates, you need to contact the carpenter's workshop or the construction market. When selecting them, you should pay attention to the quality and type of wood. It is better to give preference to coniferous species, since they are more stable before exposure to moisture and temperature changes.

The size of the chaise longue depends on the preferences of its owners. The standard value is 0.6 by 1.9 m. Using a pencil and ruler, it is necessary to draw a draft of two short and two long sidewalls. They will serve as the basis of the frame. Sidewalls are fixed with furniture corners, and their outer side is clad with boards.

On the long bar, with an interval of 7 cm, attach the legs, previously made of a bar. Their length should not exceed ten centimeters. Otherwise, the armchair-chaise longue will be unstable.

Use screws to fix the feet on the surface. In the central part of the short legs, it is necessary to fix the wheels and rollers to facilitate the transportation of the deckchair.

Use a jigsaw to cut boards of the same length, 600x80 mm. Fix the laths on the lounger with the help of self-tapping screws. The interval between fixed parts should not exceed two centimeters. To ensure that the gaps are the same, use special spacers.

If the backrest of the chaise longue is to be adjusted, then the surface should be divided into two parts: for lying and for the head. These sections are attached to separate boards and fixed on the surface of the deckchair with the help of door hinges.

To make an adjustable backrest bar, it is necessary to fix the bar in the space of the upper section, and then use a screw to mount the stand on it.

For the finished product, use a sanding machine and a fine sanding sheet. Then cover the lounge chair with lacquer or paint.

Advice: Before starting work, all wooden components should be treated with special moisture-repellent, fireproof and antiseptic drugs that will protect the chair from rapid destruction.

Chaise longue for the dacha - a fabric version of the

This model is very practical, easy to assemble, transported and takes up little space so it will be an excellent addition to the exterior of the villa site.

Thanks to the fact that this chair-chaise-longue is easily transferred, there is an opportunity on it both to sunbathe and read a book in the shade.

For production you will need:

• slats with a rectangular cross-section, size 2.5x6 cm: two slats 1.2 m, two - 1.1 and two 0.62 m;
• racks with the presence of a circular section, the diameter of each - 0,02 m, the number of parts: 1 pc.- 0,65 m, 2 pcs.- 0.6 m, 2 pcs.- 0,5 m;
• cut special fabric for sun beds or any fabric with high strength, size 2h0, 5 m;
• fasteners in the form of nuts and bolts, as well as wood screws;
• fine-grained sandpaper;
• glue PVA;
• varnish or paint for working with wooden surfaces.

When choosing a tree for the manufacture of blanks, be guided by hard beech in the form of beech, birch or oak. Since the chair-chaise-longue should have maximum strength, and the use of these trees will make the product not only durable, but also durable.

To make a chaise longue it is recommended to use the following types of fabric:

• canvas,
• jeans,
• tarpaulin,
• camouflage.

From the main workpiece, it is necessary to pre-define and then cut out the parts of the desired dimensions. Then they are grinded, for this use sandpaper or a special grinding machine.

To protect the tree from external stimuli, it must be pretreated with antiseptic and moisture repellent effects.

Take long rails in which you pre-drill holes for self-tapping screws. To adjust the chaise longue in several positions, it is necessary to provide for the presence of cutouts from two to five, with which the backrest will be lowered and raised. To build a seat, you need to drill two more holes on short rails. Between the sidewalls, insert two transverse kerchiefs with a circular cross-section, they will ensure the strength of the joint. The fixing of the cross bars is carried out with the help of PVA glue. After completing the assembly of the frame, proceed to sewing the seat, which will be attached to it. In this matter, fantasy is unlimited. Use combinations of fabrics, applique, embroidery, etc. This chair-chaise longue will not only be a beautiful decoration of the villa site, but also perfect for installation indoors, for example, near the fireplace.

Chaise longue armchair with own hands - Kentucky

For the construction of such an original chair only bars are needed. It is very easy to fold and does not take up much space. The design of this chair-chaise longue allows you to get the maximum pleasure from rest, as it promotes complete relaxation of muscles.

In order to make this model of a chair-chaise-longue it will be necessary to have:

• wooden blocks, section 4.5x3 cm;
• galvanized wire with a diameter of 0.4 cm;
• staples made of galvanized steel in an amount of about 20 pieces, they will fix the wire;
• hammer;
• pliers.

If desired, the bars can be of a large diameter, for example 5x3 cm. For their production it is sufficient to cut a single board, 5x10 cm in size, into three parts. The total length of the bars is equal to 13 m.

Galvanized steel studs can replace galvanized wire and staples. To fix them, nuts with washers are used, fixed on the end sections.

After preparing the necessary parts, drill the holes for the fasteners. It is better to do them a few millimeters more than the thickness of the wire or studs. When all the bars are ready, they must be machined with a grinder before assembly.

The assembly procedure consists of threading the bars onto the wire and their gradual joining. First, start gathering the seat and then the backrest. When the chair is assembled, cover it with paint on wood or varnish. This will increase the service life several times.

Child seat chaise longue - original and practical

This chair resembles a swing on which children will happily rest. It is not only original enough, but also convenient, besides this, using different types of fabrics, you will get a bright and unusual product.

To make a child's chaise longue, you will need:

• two sheets of ordinary plywood, two millimeters thick, 1.8 mx 1.6 m;
• six cross bars, diameter 3 cm, and length 0.92 m;
• twelve planks of plywood, a thickness of two millimeters, 0.94 x 0.1 m;
• stripes of dense fabric, the width of which is at least 95 cm( used in the arrangement of a lounger and awning);
• decorative elements in the form of ornaments;
• glue PVA;
• screws;
• circular saw;
• electric drills.

Instructions for the manufacture of a children's armchair-lounger by their own hands:

1. Draw a diagram according to the dimensions of the chaise longue and transfer it to the plywood. Make the necessary parts to work was more convenient, it is recommended to divide a large sheet into squares of 100x100 mm.

2. First cut out the side. In the places of their fixation with the beam, it is necessary to cut the grooves, depending on the diameter of the beam.

3. First, a rigid structure is connected to the bar. In the recesses, a bar is placed, its fixation occurs with the help of PVA glue and screws screwed from the outer edge. Next, the structure is laid on the side and placed under the press, until the glue dries completely.

4. We proceed to install the laths of the chaise longue. The interval between them should be from 11 to 13 cm. They are fastened with screws. To avoid injuries, it is necessary first to make grooves for screws or to put on them special hats. When the tree is polished, the grooves are hidden under the putty on the wood, and then painted.

5. Before assembling all the parts, they must be sanded. To do this, use sandpaper or a grinding machine. If further painting of the deckchair is planned, then grinding is carried out after assembly.

6. In accordance with the width of the chaise longue, you need to sew the tent. In this matter, everything depends on the preferences of the chair-lounger manufacturer. A variant of a single leaf or several parts, fastened together by velcro, elastic, etc., is possible. But, in any case, you need to provide an option for removing the tent, for washing or repair.

7. Decorate the work with bright details in the form of soft toys, butterflies, etc.

Manufacture of an armchair chaise longue folding: features and recommendations

This model of the chair is easy to transport and practical. When building several such chairs, rest in the garden with close people will be unforgettable. In addition, this chair is perfect for a living room or bedroom.

To make a lounge chair you will need:

• dry planed board;
• timber with a cross section of 3 cm;
• transparent fabric;
• plastic plugs;
• furniture screws;
• furniture bolts.

The board is cut into parts: the backrest contains two 1.2 m sections, and the seat is 1 m long, for the equipment of the seat it is necessary to make 60 cm restraints.

On the legs of the seat, three holes must be drilled to serve as adjusters for the backrest position. On the legs it is necessary to drill holes for the installation of furniture screws. Their diameter is 0.5 cm. From the front, the holes expand to a diameter of 3 cm, and on the other, to 1.6 cm.

For the construction of the bars, the metal cuttings are cut into several lengths:

• legs and backrest - 0.57 m - twopieces;
• legs and seat - 0.51 m - legs and seat;
• stop - 0.64 cm - 1 pc.

On the end sections drilled holes up to half a centimeter in diameter, for the installation of furniture screws.

On the final sections of the stop, it is necessary to make holes for the installation of the crossbar and bolts.

A piece of fabric folds in half and is sewn in the form of a bag. Please note that you need to leave a place in order to turn it off. The final sections need to be bent and sewn to the crossbar, the seat should be 1.12 m long.

The most important feature of any deck chair is its complex design, but with the right approach to assembly and with certain skills in working with a joinery tool,chaise lounge at home is quite realistic. In addition, at the final stage of the construction, a large space opens up for imagination: a variety of fabrics and their combinations, the possibility of painting an armchair - a chaise longue, will make this an original thing in the interior of the room and in the exterior of the courtyard.