Build Daily

Plumbing

August 12, 2017 18:06

Methods to get rid of mold in the bathroom

Methods to get rid of mold in the bathroom

How to get rid of the fungus in the bathroom, ask yourself many owners of apartments and houses.

from this problem, it seems, no one is immune, and in many homes can be seen this unpleasant picture: black spots on the ceiling, mold in the sealant and the joints between the tiles, sometimes - bad breath.

It seems that the fungus in the bathroom - it's not a serious problem that just affects the appearance of the room.

However, mold, fungus and bacteria cause bad health: headache, cough, skin rash, nausea.

How dangerous fungus in the bathroom?Mold spores released into the air that we breathe involuntarily, being in the room.

Once in the body, these bacteria over time, weaken the immune system and can cause many diseases.

In addition, to remove the fungus, especially in the bathroom, not so simple - the usual methods do not help here, they only temporarily removed the symptoms and focus fungus reappears in new places.

The fungus at high magnification

Spores can penetrate deep into the walls and stored in them for a long time, from which to bring them would be difficult.

Contents:

  • Getting rid of the causes of
  • Methods for removing mildew in the bathroom
  • Folk remedies to combat the fungus
  • How to destroy the fungus under the tiles?
  • prevention of mildew in the bathroom

Getting rid of the causes of

Most often, the fungus appears in the bathroom, because it is - the most humid and warm room in the house.

This is the room in which there is often no windows and there are constant changes in temperature - the most vulnerable spot.

almost any bathroom actually see small stains on the ceiling or walls, which are precursors to more serious problems.

The first thing you should know: the fungus can appear on any surface.This includes wood, and plastic, and concrete, and tile, and paint, and various insulating materials.

are cases when mold appears even in the washing machine.

Video:

spores can be stored in the house for years and even decades, they begin to germinate when there are the following conditions:

  • humidity in the room reaches the 90% mark;
  • indoors often temperature does not drop below 20 degrees;
  • lack of ventilation (or not work properly);
  • poor waterproofing.

When there are such conditions, the mold starts to reproduce extremely quickly, and put it away with each passing day becomes more difficult.

Visually, you may notice black seams between the tiles on the walls, small dots in large numbers on any surface, gray and brown stains on the ceiling, peeling paint, plaster cracked.

Sometimes the damage is so spoil the view of the bathroom, which has to do not only beauty, but also overhaul.

Methods for removing mildew in the bathroom

Get rid of the fungus is not easy, because sometimes it grows and multiplies in the room for years.In some cases, bring an inveterate mold really only special means.

In special situations have to call the professionals who carry out home treatment chemicals against bacteria.But this - extreme measures.In most embodiments, the fungus can be removed independently.

Video:

often struggle with the fungus in the bathroom is to use bleach (dissolved in water) or copper sulfate.

Also in stores today you can find high quality antifungal agent, directed not only against the mold, but also kills a variety of bacteria and insects.

consider how to clean walls with vitriol.In this case, it is imperative to take care of its own defense, because the remedy has an aggressive environment and can cause burns.

On hand to wear gloves and a respirator or face shut tight mask.

solution was prepared on the basis that one bucket take one hundred grams of copper sulfate.

on the affected walls and ceiling it is applied with a brush.As a prophylactic agent, the solution can be used even on those walls where the fungus is no.

Further, all as is leaving for a few hours - this time is better not to be in the room.When the time expires, the surface should be thoroughly washed with clean water, and room - to ventilate.

This method can help bring even inveterate mold.

Destruction of mold

If the hand is not sulfate, and get rid of the fungus is necessary, then fit a conventional bleach.Dilute the mixture with water should be at a ratio of one to ten.

Next should be treated with a solution of the walls, the room spray or apply with a sponge.Just remember that it is not necessary to wash off - only check the room.

ingredient in bleach will not be allowed in the future to form the fungus on the ceiling and walls, it is possible to carry out the procedure once a month.

Folk remedies to combat the fungus

Chemicals are not always appropriate, because many housewives specifically disclaim them, especially if the house has small children.

fight the fungus as possible and means that there is in every kitchen or in the pantry.Folk remedies can achieve striking effects.

against stains and blackening actually use baking soda, tea tree oil, hydrogen peroxide, boric acid.

must first with a cloth or sponge apply a thick layer on the walls and ceiling of soda.From above it is treated with vinegar.When the foam has settled, it is necessary to wash away the remnants of water and soap.

Then mix two teaspoons of butter and two cups of water.Using spray tool is applied to the wall, it is not necessary to wash off.

Next, a solution in which the two parts mixed peroxide, four parts water, one part acid and two parts of vinegar.

Rinse it also is not necessary, however, to remove unpleasant smells, you can leave the room with a plate of baking soda, which absorbs different flavors.

How to destroy the fungus under the tiles?

You are lucky, if the fungus in the room covered only the tile - it can be to get rid of various solutions and tools.

However, anti-mold, which is too ingrained in the walls, we need more drastic measures.Fight it can only be more effective methods of influence.

Please spend grout removal using this spatula.Walls are dried using a dryer, and all joints processed using special substances, preferably more than two times.

Next seams again overwritten by the new material, and covered with antiseptic.

You can also remove the tiles.Walls overwritten necessarily a wire brush, so to remove all fungal growths and deposits.Such actions are carried on the ceiling.

Video:

All surfaces are treated with antiseptic agents that leave to dry.This procedure is to enhance the effect can be repeated.

In addition, the wall can be lighted quartz lamp, leaving it included in the bathroom for a few hours.

prevention of mildew in the bathroom

to not have to fight the fungus, and even more so after removing it did not appear again, you must watch your bathroom.

simple steps and rules will forget about that pesky problem.

First of all, it is necessary to reduce the humidity in the room.The normal rate is 30%.

This will help buy towel warmer, and the use of pads (so that they absorbed the excess moisture).

also against the formation of mold will help permanent ventilation.Each time a soul is important to leave the door to the bathroom open.It is recommended to install the hood in a powerful fan.

If you have just moved into an apartment in the first place can be treated with antiseptic all the joints between the tiles, walls, ceiling and floor.

If the apartment is already the first spots of mold, you should immediately destroy them by means of the above, without tightening process.In addition, it is important to check the plumbing and pipes for leaks.

No less important detail.

Video:

example, constantly steamed toothbrushes, clean the washing machine, make sure that water does not accumulate on the surface of the sink or bath (for example, the joints between the wall and plumbing), in a glass with toothbrushes.

If you can not buy a towel warmer, which is very good against excessive humidity in the room, you can simply hang clothes and towels to dry in another room or on the balcony.

instagram viewer