Installing a heated towel rail in the bathroom

If you decide to buy your bathroom towel rails, the installation towel warmer your hands will allow you to save on its installation without the involvement of this individual specialists and make sure that it matches the SNP.

But the installation - the final stage, and before that you need to better understand the devices and decide which model and type of towel warmer is right for you.

In this article we will explain what are the device, and to highlight the pros and cons of different models so you can choose the one that suits you.

Next you will get step by step instructions with photos and video with the connection, after which the installation of their own towel warmer in the bathroom does not seem difficult.

Types towel

All wall towel warmers are divided into two groups: water and electric.

At the heart of the water is usually heated towel rails liquid - that is, the device is exactly the same as the conventional pipe in the bathroom.

Incidentally, it was there - the heating system - liquid appears in a heated towel rail.Under this system, installation of heating towel warmer in the bathroom is the optimum.

Video:

In more rare cases, the system can be individually and work on the thermostat, but it will be more expensive.

Water heated towel rails are separated depending on the type of connection: it may be a side, bottom, top, and on the bandwidth, the radiated heat output and the material from which made the design - all affect the final cost of the towel warmer.

Another type of towel warmer on the wall - electric.It is independent of the heating system works by converting electrical energy into heat - thermal radiation.

Electric Towel also differ from each other - they are maslyanozapolnyaemye and equipped with an electric cable.

These models differ in price, so its technical characteristics.

Electric towel warmers are more simple installation and connection than water.

They do not require a connection to a shared heating system, and hence the installation of the dryer will be easier, becausedoes not require repair bath, change communications in the apartment, and to make it, you need only setup of towel warmer, which is usually attached to it.

and water and electric models have their advantages, disadvantages and features.

Water towel rack looks like a solid heating the battery, which consists of a welded together pipes of different diameters, so that they were a multi-channel heat exchanger.

The quality of this type of device depends on how well the installation of the towel warmer was conducted, whether the system of air tubes and pipes are connected properly - all this directly affects the quality of the thermal radiation power.

water towel disadvantage is the dependence of their operation on the water quality and the material from which made the design - if these factors are of poor quality, then the system will last for long.

If the towel rail is made of steel or aluminum, it is high risk of corrosion and non-ferrous metals will make less rigid structure, which increases the risk of decompression system.

Electric towel warmer is independent of the heating system, and if the installation is correct, he is a full battery does not require additional repairs and inspections.

However, negative of such devices is that the payment of electricity will increase significantly.

Thus, the choice of instrument depends on several factors: how the heating system carried out in the house, whether you want to be able to adjust the temperature (if yes, then choose an electrical appliance), and where you plan to install towel rail - if you want to hang it inroom or in the kitchen, the place where water device will be problematic because of the layout of the pipes in the apartment.

The rest of both of these systems are functioning well and are almost identical.

How to put a towel rack?

Installation towel warmer should not start without watching the video with a connection - it will help you in your work and do everything in accordance with SNIP.

Proper operation is very important, because the device is mounted directly in the water supply system, and if the work is carried out properly, will suffer not only the heated towel rail, and water.

In general, towel rails installation is quite simple and is as follows: to one end of the device, bring the water, and on the other hand make it return line, i.e.outflow.

This occurs installation of the water heated towel rail.Look at the picture with the connection, as it is done.

Photo:

But before embarking on it, youWe need to dismantle the old device, if any.Installation of a new device will depend on the type of pipe, which is made from a towel rail.

If they are made of metal, then connect the pipe to the water system will need to be using the method of crimping.

This material is considered to be quite cost-effective, and therefore setting the towel warmer in the bathroom will not cost a lot of money.

towel warmer made of copper pipes will be more expensive, however, and will last you longer, becauseThis material is much more reliable.

However, there is a minus - install such a system on their own are unlikely to - have to involve a specialist.

third option mounting - with polypropylene pipes.

It is durable, and at the same time economical material, however, connect the pipes will be possible only by means of welding, so save on this method of installation will be possible only if you possess this skill.

You can connect a heated towel rail as a central heating and the hot water supply.

better to choose the second option, becausein this case, your towel rail will be hot at any time of the year, not only during the heating season.

heated towel rail is fixed on the wall as follows: to fix the system, you'll need clamps.

whole assembly system is to secure over the wall on the towel warmer anchors at several locations.The mount can be detachable.

Video:

It does not try to fix the device most closely, asmost of them are equipped with an adjustment system that will allow you to push or pododvigat dryer to the wall.

This is a pin with a thread that can be screwed in or out, which thus affects the length of the bracket.

If your device lock is static, then carefully calculate how far away the corner fitting - it is important that it is tightly joined to the opening of the towel warmer.

If you have to install the system on a sealed coupling with male or female thread, you have to use a plug-in connection - "an American", which is often included with the unit.

«The American" set solder usually do this.

If you have central heating, and a riser for dryers is already there, we first need to install the solder tap, and in him to establish "an American," sealed its solder side.

If the riser in the bathroom separate, it is best not to use a radiator valve, becauseit regulates the flow of water, and once installed in any desired location passing the volume of water in your house will be the same for all of the riser, which is forbidden, sincethis is not the SNP, and you can not adjust it for all the apartments in your home.

If the device crashes directly into the riser, the radiator valve is suitable, becauseIn this case, the permeability and the water supply will not be disrupted, but you can adjust the towel warmer temperature, increasing or decreasing the flow rate.

This option is more suitable for the self-heating, becauseIn this case, you can make a layout of pipes, without affecting the water supply to their neighbors.

If you have a centralized system, equipped with a seal to the water flow, you can also use the radiator valves, it corresponds to the norms SNIP.

Watch the video connectivity system before attempting to install your towel warmer, because this work requires care and thoroughness, to do everything correctly and in accordance with SNIP.

Video:

Since the device is usually equipped with several holes, you have three ways to connect - it can be top, bottom and side.

All of them held equal, eliminating diagonal connection - for this, use the scheme to install dryer was correct.In the method

diagonally connecting the water flow will be stronger, and in the process the lower vertical connecting or - on the contrary, hinder their pitch, which means that the overall temperature in the bath is lower.Keep this in mind when installing the system.

towel warmer installation height depends largely on your desire as well as the placement of pipes and riser in your apartment - the height should comply with SNIP.

towel warmer installation (bottom, side, etc. Methods) will help you create the right atmosphere in the bathroom, and not think about the repair of the system for a long time.