Build Daily

Doors, Locks, Accessories, Partitions

August 12, 2017 18:06

Installation of automatic doors

click fraud protection

Due to its simplicity and practicality, automatic doors have long conquered the modern market.In the first place they noticed the owners of large commercial establishments, as well as large-scale housing.

Content

  • Key features automatic doors
  • Classification of automatic doors
  • The principle of automatic doors
  • Installation of automatic doors
  • Price question and other aspects of automatic doors

Now the cost of this productsignificantly lower than a few years ago, so many people are happy to prefer to install doors at the data in private homes.Automatic sliding door consist of two valves and actuator, which drives the door.Despite this, there are many serious aspects to consider when buying and installing doors.

technical - description - and 4377 - list - sets -KA022-2424

Key features automatic doors

most important thing to know about automatic doors - this is their target destination to pass through thousands of people a day.Obviously, when a small amount of people, better to buy this miracle of technology is not to think.At the same time the use of classical doors simply would have led them to become worthless in a couple years.Also, automatic doors are known for their large width, so they can pass through the huge flows of people.

particularly convenient to use the automatic doors in large supermarkets, where customers often use huge trucks to transport products to the car.It is really practical, the most the buyer is not necessary to ask somebody to hold the door.

Many experts argue that the main feature of this door accessories - is the best possible maintenance of the microclimate in the premises.Indeed, because they regularly closed when necessary, it adheres to the desired indoor climate regime.Many people mistakenly believe that the absence of doors is almost similar to the automatic doors.However, it is the modern door devices not only monitor the preservation of climate, but also significant energy savings when operating air conditioning and other temperature control system in the room.

multiofsaydnye_revolvernye_dveri

Classification of automatic doors

Depending on the institution, which will be installed automatic doors, should opt for the most practical.The following types of automatic doors:

  • hinged doors;
  • revolving door;
  • sliding doors.

Swing doors used extremely rarely, especially when compared to the popularity of other automatic doors.They work on the same principle as conventional doors, but opens them to a special mechanism.Often this type of door used in the case where there is simply no room for the sliding type doors.

Revolving doors are particularly popular in supermarkets who visit the huge crowds of people.Due to its circular design doors do not allow the crush of people, so often found in large retail establishments.It is also important that one such door and can let people in, and release from the premises.A variety of sizes can be applied in a particular case - it all depends on the scale of the supermarket or entertainment center.

sliding doors - the most popular.They are installed in virtually every major commercial establishments.Maximum simplicity and practicality makes them easy to use in the repair and maintenance.Also, it is easy to find and fairly inexpensive options such doors, however, is still to look closely to the eminent firms.

1141422

The principle of automatic doors

total simplicity of the product also applies the principle of operation.The main element of the majority of such doors - a motion sensor, which in human approximation gives a signal to open the door.The uniqueness of the control mechanics of the door is the sensor sensitivity and reliability.Often there are automatic doors which open only when a person could stand a few seconds before the actual doorway.It's no good, so experts should undertake the necessary steps to everything here functioned as clearly as possible.

Revolving doors may have a slightly different principle.If they have small dimensions, they can do without all the sensors and other electronic devices.Often these doors bring a lot of inconvenience to ordinary people, who have the power to bring them into action.

It is also important to make a choice in favor of the silent door.Many vendors that provide a quality product, do not pay enough attention to the quality of its doors.Quiet operation - a pledge of high quality functioning of all mechanisms.Also, each manufacturer must provide a guarantee for which all the elements of the door should be replaced in case of breakage.

times1 (1 )

Installation of automatic doors

Despite the overall simplicity of design, quality, only an expert will be able to install automatic doors.In the overwhelming number of cases, first set a special cross-sections, and further door elements themselves.Before the main action and test the functioning of the product should be checked whether there is the opening and closing of doors without any problems.Then the most difficult - is to install motion sensors.Often it takes a lot of hours to install the necessary sensitivity.This aspect depends on the number of people who visit the restaurant.If this is a unique popular entertainment center in which thousands of people come every hour, the doors swing open immediately after the slightest movement.

revolving door is much more difficult to install than other varieties of automatic devices.Massive construction and provides a lot of doors elements involved in the installation of several specialists.Even the absence of sensor places the responsibility on the professionals when it comes to the smooth rotation of the door.It is obvious that such doors should be regularly lubricated to creak and nothing worked smoothly as possible.

Installation of automatic doors can be conducted himself, however, in most of the cost of construction and installation is often included, which experts will most efficiently and quickly.

Below is a detailed instruction of installation and maintenance of automatic doors:

  1. At the beginning of the process is necessary to prepare all of the surrounding machinery to install the door.It is necessary to verify all dimensions and to bring electricity closer to the entrance.Another need to prepare so-called slots or "rails", which will slide door.
  2. Next automatic door installed precisely into the grooves.In parallel, the installation of the sensor, which will instantly open the door during the approach of man.Mounted Door stops running.
  3. When everything is set up, you can connect the unit to the power supply and check operation.Most likely, the sensor will have to adjust, because in the first run, it is too slow to respond to human movement.Increased sensitivity solve the problem.It is desirable to test the door within a couple of hours.Only then can you switch on and use the active door.
  4. With some regularity is necessary to carry out the technical maintenance of the door.Each week will need to lubricate all mechanisms.

automatic doors

issue price and other aspects of automatic doors

Looking at the set of photos, which shows the automatic doors of different configurations, is always difficult to make a choice in favor of a particular model.In this serious matter should help some of the parameters.In the first place - is the volume of the room and the number of people visiting the restaurant.Based on this, it is possible to choose the dimensions of doors and some other characteristics.

The materials of which made most of the doors - it's aluminum and tempered glass.Often, there are also all-glass doors, however, the possibility exists that they will be damaged over time.The quality needs to be given the most attention, often novices in the production of automatic doors produce defective products, which is a short period of time simply fails.

If we talk about the cost of the automatic door, it is always very different even from their closest analogues.Primarily manufacturers pay attention to the material from which the product is made.Plastic doors cheapest, because they quickly lose their original properties and parameters.Definitely aluminum frame is the most popular and reliable solution.The price of automatic doors, consisting completely of glass, of course, much higher than the others.However, the appearance of such a product really deserves only positive reviews.Most of the automatic sliding door, the prices of which are at a fairly low level, are not the most decent quality, but often new firms set low prices to attract new customers.It is worth to know.

instagram viewer