Secrets of LG washing machine repair their own hands

In order to fulfill their own hands Repair LG washing machines have to become familiar with its design features.

modern appliances offers the convenience of operation and high reliability.

At the same time, regular loads lead to wear and tear of various components and assemblies.

on the market today, you can easily choose a washing machine, suitable for cost and performance.

Before you go to the store, it is desirable to get acquainted with people who are already using this or any other appliance.

next point to which attention should be paid, maintainability of the machine.

Functional diagram

Washer LDZHI is a complex electromechanical device.

Its functional diagram includes the following components and assemblies:

• pouring water system;
• heating system;
• system clothes washing;
• water drainage scheme;
• linen spinning system;
• drying system.

Each new model developers will improve any or several components.

In order to avoid premature repairs, installing and connecting the washing machine you must strictly comply with the rules set forth in the instruction manual.

downloading things for washing, you should follow the recommendations in terms of volume and texture of fabrics.

Troubleshooting

for LG washing machines are not created special conditions during operation.It is designed for use under normal household conditions.

quality tap water and is well suited for use without prior training.The video shows a washing machine installed in an ordinary bath of standard high-rise building room.

Video:

For convenience, the designers have developed a display system on the status of the main components of the unit.

Long experience shows that when the full serviceability of all components the machine can not work.The main reasons that arise in the process of washing, good researched and easily eliminated.

rattle and knock

Often, when you turn on the washing machine there is a rattling sound of the drum.On top of that vibration can occur.

possible that the drum were simply small foreign objects - pen and coins.It is necessary to stop the washing machine and inspect the drum.

similar effect occurs when the laundry loaded in the drum is uneven.Or is it too much.

repair in such a situation will not be required to distribute the underwear is fairly evenly in the drum cavity.The cause of the vibration may be unstable position of legs.They need to be adjusted.

If the previous procedure does not help, you have to own hands to eliminate the malfunction.

Video:

water flows

washing machine design is arranged so that all the overflow of water from one reservoir to another made by hermetic channels.

If the water begins to flow onto the floor, then at some point the connection hoses weakened.This occurred in place of the hose connection tap or hose entering into the washing machine.

In this case, you just have to tighten the coupling to the connecting places.Water flows in the case where the clogged drain pipes.

They are, in general, should be periodically cleaned and brought to this state, when the leakage becomes a problem.If the self-cleaning does not work, call the plumber.

Water does not flow out of the car

In the case where the water is not drained from the washing machine, you must perform preventive maintenance drain system.

The first thing to check when you experience this trouble, the state filter incoming water.It is possible that it is clogged.

second reason, which leads to the effect that the drain hose is clogged.Sometimes he finds himself in a choked condition.The third reason - the drain pump filter is clogged.

Video:

carrying out work on the removal of the fault, we must act consistently.

The video shows the cleaning procedure that is necessary to carry out carefully so as not to disturb the integrity of the hose.

main components and assemblies

repair or preventative maintenance of washing machines with their own hands, you need to know about those sites that fail faster and more often.

Among them should be called the following:

• seals and bearings;
• heating elements;
• rubber hoses transition.

When there is another fault, it is necessary to act in accordance with the operating instructions.Navigate to the signals that appear on the display.

For convenience, you need to have handy table with a breakdown of these signals.

Long experience has shown that acting on these recommendations, in most cases it is possible to establish a full-time job LG washing machine.

If a knock when the machine can not resolve, you need to call the master, or to repair their own hands.The video shows the sequence in which the drum is repaired.

knock or vibration during washing occurs because the bearings are worn out.

Therefore, the main task in the repair is to replace that worn bearing on performance.

Video:

the same time with the bearing is always changing, and the caul that ensures tightness of the drum.The most important operation in this case boils down to, to remove and install a new bearing.

And also replace the oil seal that protects the bearing from moisture.

When the washing process is delayed due to the slow heating of the water, it is necessary to examine tubular electric heater.Most often this element is called short - TEN.

It is formed with the scale over time.In order to slow down the scaling process, different chemicals from the number of washing and special powders.

Practice shows that they help, but the scale is still formed, albeit at a slow pace.

The video shows how to remove and clean heater from scale.

Remove scum can only mechanically, using a wire brush.If after repair on the surface of the heater traces of rust, it must be replaced by a new one.

Almost every woman, which is engaged in washing, faced with a situation where the washing machine without any apparent cause water leaks.

Video:

In this case, the repair is to ensure to find the place of leakage and eliminate the cause.Very often, at regular washings weakened collars density on the ground fixing.

If water flows in this place, it is necessary to loosen the clamp to move it a little bit and fix again.It happens so that a crack in the hose.

In this case, one way out - you need to replace the hose.Sometimes the water flows from the fact that the door seal was broken.The rubber gasket must be replaced or repaired.

Maintenance

repair washing machine is always accompanied by nervous tension, trouble and unrest.Especially in the case where it is performed by hand.

In order to avoid unnecessary trouble, it is necessary to perform regular preventive maintenance of the washing machine.

The video shows how cleaned the pump, bilge water from the reservoir.The pump must be cleaned after each wash.

Video:

Similarly, it is necessary to clean and wipe dry the rubber seal between the drum and the door.Over time, the seal on the accumulated fat, and he no longer performs its function.

Experts recommend clean the tray filling detergent.If you perform these simple recommendations, then serious repair washing machines in the coming years will be required.