Build Daily

Furniture And Furnishings

August 12, 2017 18:07

Hammock chair with his hands

click fraud protection

For those who have a garden at home or cottage, there is a scale of possibilities how to equip a place for recreation.One embodiment - to make a seat hammock.It is somewhat similar to conventional swing, but it looks elegant and unusual.

Content

fabric chairs hammock

This option ismake a hammock chair with his hands, it involves the use of a conventional hoop for gymnastics.By the way, this hammock can be converted into a children's rocking chair, if necessary.

gudlingd134

From the materials you'll need:

  • hoop for gymnastics;
  • jeans - 3 m;
  • colored cotton cloth 0.5 m;
  • belt - 8 m;
  • ring of metal;
  • buckle made of metal - 4 pieces;
  • Trousering braid;
  • filler.

Preparation of parts of the structure

All parts of the hammock chairs are created separately and then assembled into a whole structure.Progress:

  1. three-meter denim fabric must be cut into two equal parts by a half meters each.Each of the four collapse and cause an arc with a pencil.The arc length of a quarter of the circle diameter - 65 cm. Cut the fabric according to the drawing, and then expand.As a result, you should get two equal circle.
  2. In each round to move away from the edges of 5 cm and draw a circle inside another big.
  3. on a circle mark slits through which straps are attached.Fold the circle four times, the folds become the axis, according to these axes, a 45-radusnym angle will be straps.To mark their location, you must fold the circle in half one more time.The mark, which has turned out, connected to a central point in a circle in a straight line, in this place will be cut.Similar actions are necessary to carry out a circle on the upper portion.To mark the two lower portion, it is necessary to determine the length between the axles and divide it into three different parts.
  4. two circles on the table, expand and connect their front part, the circle on which the markings should be upstairs.Secure circle pin and the planned cut a dash slot.Do the same on the second lap.
  5. You should turn on the fabric, like petals, they need to turn away, to wrong side facing up.And sheathe their braid, if not her, then we can replace Dublerin trouser braid, and then notching blade.Stepping back from the edge by 3 mm, defer the slot.
  6. Departing from the edges of 4 cm, sew the two bars for cover.In this case, refer to the circle in the sector was able to enter a gymnastic circle that will serve as a framework.Then remove the cover on the front of the iron and iron.
  7. Now came the wrap process, it must be good to sheathe thick synthetic padding.Thereafter, the workpiece placed in the hoop, and flatten the entire structure, departing from the edges of 6 cm, to sweep away the two parts cover.
  8. Sew up the blank section, over which was placed a hoop, if somewhere filler came out, you need to carefully cut it.
  9. slots for reliability strengthen the hand-stitch and quilt cover the whole on the basis of a cotton mattress.

circuit - pattern - chairs, hammock

Assembly hammock

  1. Before you begin assembly, you need to cut the strap that slings serve.Stretches should get a length of 2 meters.The end of the belt tape to be treated with fire.
  2. With all the belt clasp hoop.Metal clips to strengthen the place of capture.
  3. The ending thread the buckle straps at the opposite ends, in front of this thread the them in the ring.They will give the opportunity to choose the desired height of the hammock, the slope.
  4. If your intention is to use this chair hammock like a cradle, you will need to take a smaller diameter of the circle.
  5. Hang the hammock chair on the liked the place, it is better to do it in a shady spot in the garden.Make this angle, it was convenient to have a rest.

e534s9

wicker chairs, hammock

chair hammock created from woven cords has some its charm.Even in the photo they look charming, then what to talk about what they saw with their own eyes.You can create one's own, and for this you need to have at least basic skills in macrame.
What will it take to create a woven hammock chairs:

  • hoop - 1.10 m for the back;
  • hoop - 0.7 m for the seat;
  • cord with a core of polypropylene;
  • cord connecting rings - 2 pcs;
  • slings - 12 m;
  • rod of wood - 2 pcs;
  • rubber gloves for work;
  • scissors;
  • roulette.

to weave a hammock-chair with your hands, you need to perform a number of jobs:

  1. We need to do two hoops.Braid of the cord to the metal to be seen.On the meter metal hoop spent about 40 m cord.The coils should be done tightly and for a better quality, after 20 turns, it is necessary to strengthen the place of winding extreme loops with maximum pulling.When wrapping hoop need to make sure that the cord lay rovnenko.
  2. Now came the seat to do.For this, the top coil is necessary to weave a common grid, attach it to the ring double loop.If you have long been doing macramé, and can weave intricate patterns, you can choose any of them.If you're in this business quite a beginner, try the simplest pattern, which is called "checkerboard".Those ends of the nodes that will hang from the seat, do not need to cut, then they will be used in the design of the fringe.It is also worth considering such a moment: the faster you will weave its pattern and pull the cord, so, as a result, the seat will come harder.s69dschfvas2776v03ts1ef199f886ef13
  3. Now came the hoops to connect in a single structure.The front part, where a person sits down, both the hoop carefully wrap the cord.
  4. Make nadpily on the four corners of the bar and put them on the part of the backrest.Thus, the hoop will be well fixed and the seat will have the right backrest.6dzab72df0b66864769skshk69167ts8d6
  5. Now you need to start back braiding.Again, the presence of macrame skills, choose an intricate pattern of it will depend on what the look will have a chair.If you are not particularly versed in the wisdom of this craft, use this simple method to attach the strap to the top of the circle and moving down, braid back.When you reach the bottom, tie the cords to the lower part of the backrest.And finished braid chair, making fringe.
  6. Reattach the rafters, and put a hammock chair on the spot.

e987b594tsa68fb2680s3b292867ach71

These are two ways to make a hammock chair suspended, does not really take a lot of time and money, all the materials are sold at a reasonable price and come out much cheaper than to buy ready-made structure in the store.But you will always have a place in the garden where you can relax with a good book in hand.

instagram viewer