Build Daily

Building

August 12, 2017 18:05

How to hack into the frame leg with his own hands - building a wooden house

Recently, people concerned about environmental issues, are increasingly built of wood houses.There are many different methods for the construction of wooden buildings that depend on the tree varieties, and the structure of the size and the complexity of the structure itself.Here's how to cut in leg frame, this method is more log called "clean angle."

chop the carcass into the paw

markup log

special attention to the wooden house in the paw is on the correct marking of logs.The distinguishing feature of this method of construction is that the construction in itself does not protrude from the beam angles and adjusted in length.Orient always on the log with the top of a smaller thickness.It is marked in the first place and is the model for the processing of the remaining logs.There are two ways to "paw" - a simple and more complex, for professionals.When you first use the spikes, inserted, and the second - the root.





Along the logs processed by the party that will "look" inside the house.Kant processed on the opposite side of a length equal to approximately twice the diameter of the log.The remaining two sides of the "projection" - a length slightly exceeding the thickness.

Start of

log- in leg work directly for assembly at home begins with the manufacture of the salary, with the so-called crown "the accountant".Two logs lie strictly parallel.Then - perpendicular to them - the other two.It turns out the square that defines the size of the house.This should be made a permanent styling control with a building level.After that, the nests markings for planting timber.

Produced marks at both ends of the logs.Intended place to go for no more than half the thickness of the beam.After laying in the slots received other logs need to treat their upper part to the subsequent laying of the logs was flat.It should not forget to do hack - frame - in - paw between logs insulated lining, which is necessary to provide grooves in the logs.It is necessary to prepare the nest under the beams so that when the strip grooves on each other, they are well in contact.Logs into the slots necessary to drive smoothly, and controlling the quality of the landing and horizontal position.Also with the help of a plumb line is necessary to monitor and vertical walls.

insulation

For a better insulation of the structure along all you need to pave the logs log tow or other insulating material.It will be appreciated that such a method requires great care during operation, otherwise avoid troubles such as drafts.And the house itself will look crooked, so that life in the crooked house of joy does not deliver.

It should take care of the quality foundation for the house.That depends on it, how long it will be your home, do not "float" if it eventually.

instagram viewer