How neat hide pipe in the toilet - the three best ways to

quality repair in the bathroom provides attention to detail.Pipes, wiring confusion, check valves, meters and filters, without which communication in a modern apartment, not add beauty freshly laid tiles or decorative panels.They just need to hide.The same desire may arise from the owners of toilets without a fresh repairs to somehow dignify this room.Options masking a lot of pipes, and for each case, you can choose the appropriate one.

Locker

easiest for decades and proven way - to hide the pipe in a locker.It is the most suitable option for the toilets, where repair is not planned in the near future.Locker is convenient because the pipes, filters and counters will always be easily accessible for maintenance and repair.In addition, there is a place to store household chemicals and hygiene.The cabinet is positioned over the toilet, in the place of the greatest congestion of pipes and sewer riser passage.The space underneath to the floor can be hidden behind a decorative screen.

Sanitary locker just to collect their own hands.First, the walls are fixed to the corners and plugs his skeleton from a bar.Between a timber segments are joined with screws.The framework should take the form of a parallelepiped, its face must be strictly horizontal or vertical (check level), so that later no problem with hanging the doors or installing shelves.Vertical faces in 2-3 locations are connected by horizontal segments of the timber can be smaller section.They will subsequently be attached shelves.

If the wall curves, it is necessary to use wedges and pads, which can be further decorate panels in the color of the walls.

External vertical loops mounted hinges and hung door.They can be used chipboard or laminated MDF, cut to size, with the glued edges, and you can choose the suitable size for doors for kitchen fronts (they are sold separately in building supermarkets or stores like Ikea).Inside mounted shelves, recesses for the pipes are cut out using a jigsaw.

for screen under the cabinet frame is attached in the same way as a simple rectangle.This design should be the height from the floor to the locker and fit snugly to the walls.Another made the exact same frame and fixed on it with screws or nails a sheet of plywood or particle board with holes for pipes.The screen is connected to the frame with screws in the upper part or with metal plates and a screw connection, the second is easier to unscrew, if necessary to remove extra screen to access the chimney.

shutters

cabinet is undoubtedly convenient, but in a small closet may not be room even for opening doors.In such cases it is possible to cover the pipe shutters.It is a modern and convenient option, albeit more expensive.Shutters can be used during overhaul of the toilet, picking up the color under the tile or plastic panels and covering their niche with a boiler and other equipment.An additional advantage - they are locked in the castle, and, therefore, dangerous cleaning products will not be available to children.

The rolling shutters can not make a hole, so by them, as well as under the cabinet, mounted screen, but on a small height, even to the point where the outlet pipe to the toilet.Sami shutters are attached to the ceiling, and the shaft on which they are wound, must be horizontal, just so they will not get stuck.

Stationary version

If the toilet is renovated with replacement of pipes, it makes sense to hide them for a non-removable duct or drown in the wall.To do this, make sure that made a number of demands:

• all connections are made with high quality and tight,
• in case of accident to the communication must be accessed through a hatch,
• door or hatch to install and to valves, meters and filters for their maintenance,
• in areas to which access is not possible, the compounds should be at least, if it is supposed
• fully enclosed box or false-wall, you need to take care of the thermal insulation pipe to condensation on them does not lead to the appearance of mold.

Before walling pipe tightly, better watch for some time (a week or two) of them that all seals for leaks.

In the most common case, when the pipes are arranged vertically in a corner or go all together along the floor, they can close the non-removable duct.

1. First mount the frame of timber or metal sheets, choice of material depends on what will get off box in the future.All faces of the frame should be parallel to the floor or walls, if not provided beveled or curved design.
2. At the assembly stage framework provides space for hatches and made them the contours of the appropriate size.Less than 15 * 15 cm they do not cost as work through a small hole difficult.
3. frame is sheathed with sheets of drywall on the screws or plastic panels, if the walls in the bathroom are finished with them.For the panels have to install additional profiles, such as, what they are attached to the walls.
4. On gipsokaptonny box glued tiles or wallpaper, as well as in the rest of the walls in the bathroom.
5. holes hatches closed doors made of plastic (available in standard sizes in the plumbing stores).

If the box is mounted in a closet of plasterboard, water-resistant material is used, since it is difficult to avoid condensation.Taxation tiles, this design looks attractive and does not stand out from the rest of the walls.However, in the event of an accident plasterboard box will have to completely disassemble and then make a new material, whereas a box of plastic panels can be dismantled and reassembled.