Separate connection of the washing machine to the water supply - all options

Washing machine is in every house, and to explain what it is, no one needs.Therefore, the question of its connection to the water supply at first glance so simple, that the idea arises immediately - and what is there, in fact, reason, any man to handle it with no problems.Indeed, the biggest challenges in this, but the fact is that there are some nuances that define the very method of connection and selection of used devices.

It used in our homes all the water pipes were only metal, but now frequently encountered, and plastic, and metal and plastic.In addition, the installation of a variety of plumbing fixtures like faucets, toilets various designs (with appropriate sideburns) increases the number of possible options for the connection of washing machines.

It should immediately be noted that the principle of a single connection - through a tee.That it is joined by the shut-off valve (cock), through which the water will flow through the hose into the machine.But how to cut into the water supply pipe This is the tee, largely depends on the material from which made the water pipe.Consider all the options for installation of the "adapter" and ways to connect the machine.

on metal pipe

Option №1

Washing machine is put not only where it is more convenient.On the site selection affects the availability of free space in a particular area.If it is already installed any sanitary devices, which are connected to the water supply by a flexible hose, it can be assumed that lucky.For example, the toilet tank, blender, dishwasher.The main thing that cut into the pipe already installed and a tee.

Then everything is simple.Hose previously connected device is disconnected, and on this place put another tee.Its 2 "output" are used for connection of plumbing and tap off the washing machine.Some adapters crane is already (as shown).

Sometimes, such a device can be installed on a site eccentric - mixer, although this depends on the model of the sanitary appliance.Some products are "allowed" to do so.Sometimes it is only necessary to put an additional tube extension.

For those who have not encountered this kind of work (for example, because of their age), just a few tips:

• to eliminate the possibility of water leakage onto the thread wound around the so-called "preroll".Traditional material - tow.But now on sale there are special tape FUM, which work much more convenient.By the way, is "penny" - 8 rubles / piece.Sold as fishing line - to "reel";
• tightening the locking nut should not make much effort - you can easily strip the threads.

№2

variant uses a device that is called the "vampire."It is installed on the tube and fixed with special clips.To eliminate leaks under the "vampire" is enclosed seal.All you need is included.The feature of this device is that it has a branch (as in a tee) ending thread.After installing the device in any convenient location on the drainage pipe is inserted in the drill pipe and into the respective drilled hole diameter.

Next on tap is put cock and joins the hose from the washing machine.The technology is also quite simple.

Option №3

Tee on the pipe there, "Vampire" at hand, too (or do not want for whatever reason to put it).Then, the connection process is somewhat more complicated - will have to make a frame.How to Install a tee in this case, what tools and accessories used depends on local conditions.For example, metal - metal, metal - plastic and the like.

note the specifics of such a method.At the ends of the pipes (after cutting a piece of line) have threaded for screwing the tee.How to do it, if the track passes close to the wall?Dolby her to do a recess?Therefore, this method of attaching the washing machine - an extreme case, if earlier for any reason impracticable.You can also consider options for tapping without welding.

consider following options based on the fact that you have to make a frame.Other methods already mentioned above (№1 and №2), and are suitable for pipes made of any material.

on pipes of metal (plastic)

This material is good cut with scissors (special).The main thing - to choose the right tee.It should be fitting taps specially designed for the "docking" is a metal-plastic (plastic).Complexity only that you make them a quality crimp.You will need special tools.If it is not, as well as relevant experience, it is better to hire a specialist.

Practical recommendations

• hydraulic shocks in our water mains - to the, unfortunately, is no exception, but an everyday reality.To avoid premature failure of household appliances, for which water is used, it is advisable to "input" to the apartment (private house), install a pressure reducer.
• About quality of water supplied to mention even the deaf and lazy.Therefore, between the pipe and a washing machine, it is desirable to put the extra "personal" filter cleaning.