Build Daily

Repair Of Premises

August 12, 2017 18:06

Venetian plaster with your hands

click fraud protection

One of the most popular decorative wall covering is a Venetian plaster.It gives an opportunity to get an original glossy or matte texture that mimics marble.Apply this kind of plaster in several different ways that master is not so difficult.What happens in the end, it depends on the imagination and creative abilities of the person performing the work.Venetian plaster with your hands can be applied to the walls in the apartment and the house.

Venetian plaster looks impressive in any interior

Venetian plaster looks impressive in any interior

How to make your own Venetian plaster

To prepare Venetian plaster yourself you must acquire the following ingredients:

  • Acrylic putty.
  • Quartz sand or stone chippings.
  • dyes.

ancient masters for the production of Venetian plaster used natural dyes, slaked lime, marble dust and water.Today, such a mixture of manufacturing technology has changed a bit.Already nobody uses lime, and instead used all kinds of synthetic additives, natural dyes are used instead of artificial dyes.

it is possible to independently produce Venetian plaster, thereby saving money in the home.The point is simple, but quite troublesome, and the desired result can be achieved by trial and error.To prepare the mixture is required to mix silica sand, marble chips are very finely ground, dyes, slaked lime or acrylic filler.Mix all necessary to obtain the desired color and consistency.

main thing in this case to comply with the proportions, so as not to make a mistake, you need to take a piece of cardboard or hardboard, which put a few layers of the sample, as well as on the real wall, when it is applied to the purchase decorative plaster.If the result you are satisfied, then your experiment was a success.

nuances of applying Venetian plaster on the walls

to carry out finishing work using a decorative plaster mixture will need the following materials and tools:

  • Decorative plaster mix (Venetian plaster).
  • Synthetic dyes needed shade.
  • spatulas of various sizes, trowel, having rounded corners.
  • Building mixer or a drill with an attachment.
  • primer with deep penetrating property.
  • special substance resembling wax.Gloves made of suede or fleecy special nozzle on the drill.
A tool for applying decorative plaster

tool for applying decorative plaster

decorative plastering walls with a mixture of their own hands always starts with surface preparation.By applying Venetian plaster wall should have a perfect evenness, especially in the corners it should not present any holes from nails, dust, dirt, residues of previous plaster.If there are dents on the wall, they must be repaired with a mixture of leveling and sanded with sandpaper.If the wall is found too many places crumbling, it is best to plaster it all over again.The surface under the decorative plaster should always be primed with a special primer.For this purpose, it is best to use an acrylic composition, deep penetration.Apply the primer with a wide brush or roller.The next stage of finishing can be started only after the wall is completely dry.

Kneading mixture and applying the first layer

then diluted color.For mixing it is best to use the building mixer.While stirring the mixture should be gradually thin stream pouring paint.The most important thing in this business to achieve uniformity of color and uniform texture of the total solution.The mixture is then left for some time alone to defend it, and then thoroughly stirred again.

Mixing plaster mixture

Mixing plaster mixture

Initially applied to the first base layer with a broad trowel, having rounded edges.It is better if it is made of stainless steel.The thickness of the first layer of plaster must not be more than 2 mm.If you use a mixture of purchase, you must first read the instruction, which is available on the packaging.Please note that some manufacturers are advised to first base layer mixture is diluted with water.In addition, commercially available today, a large number of specific compositions which are intended precisely for a substrate.

The technology of applying the mixture to the wall

Technology applying the mixture to the wall

After drying, the base layer is necessary with a spatula or trowel to remove all the bumps and nodules appeared and perform polishing the edges of the walls with fine sandpaper.After that, apply the first layer of the most decorative plaster.On spatula take a small amount of weight and is distributed along the edge of the trowel.Then immediately erratic strokes smear a thin layer of plaster.In narrow spaces and corners in the trowel should be replaced with a spatula.After the layer dries out a bit, for it is necessary to pass a trowel.This is to ensure that the coating is smoothed out, and the error disappeared.It is important that the application of the plaster should be carried out exactly according to the technology, only then will you get a great result.

second layer

Typically, the second layer of plaster differs from the first in color, so it is advisable to take a lighter or darker tone.The choice depends on your imagination and preferences.And changing the nature of the application of smears.They become softer, a tool for the application of selected smaller.Movements of hands should not be the same and repeat.

After inflicted a second layer of Venetian need to produce press-fit, ie, seal plaster mechanically.For this purpose, taking trowel, which is pressed against the edge of the wall, and then carried out with some force along the wall surface.This procedure allows you to create and manifest pattern shine.It is important that the pressing-in must be carried out to dry the plaster, so that the second layer of the wall should be applied in small pieces.

Creating textures

Create texture

If you wish, you can complement the image of gold or silver pearl glaze.The results secured using a special wax.Even before the work is necessary to mix it.This material is applied with a spatula with a thin layer removal of excess.The main thing should not return to the same place several times, otherwise dark spots may appear, which will be very difficult to remove.Once dry, wax, polish it thoroughly.For these purposes, use special gloves made of suede or grinder, and sometimes a drill, which has a soft tip.It is important not to focus their attention on one place for a long time, as a dark spot appears on the wax.After that, work can be considered complete.

What is the effect of craquelure

There is a decorative plaster, which has the effect of cracking.It put a completely different technology.At the beginning of the wall primed, then Kohler plaster, wherein the first and the second layer separately.And after all this, the wall is applied in a thick layer of 3 mm with a trowel.Movements are performed in a chaotic manner.The second layer is applied on wet plaster.Smears of the second layer is made not so large.After that, the building is taken dryer and the surface is dried up until the coating starts to crack.Then the Venetian should thoroughly dry.The resulting cracks and called crazing.It is necessary to wipe the copper, gold, silver, pearl white or brown paint.For these purposes, it is best to use a sponge of polyurethane foam.At the same time with a cloth should be washed surplus, and in the end the whole process wax.

Thus Venetian plaster can be applied not only to yourself but also to make.Make it not so difficult.However, it should heed the advice of experts.

instagram viewer