Glossy granite floor - the types and user choice

Thanks to the original execution, ceramic floor glossy looks good in any interior.Laying of the coating requires a responsible approach .

Finding practical and stylish at the same time material for the arrangement of the floor, it is worth to consider the option of laying porcelain tiles adapted to heavy loads.Initially, the material used mainly in the facades of buildings and commercial premises.However, numerous operational benefits and wide range of colors make granite floor glossy popular and the owners of private houses, apartments and cottages.

glossy granite floor

Adds attractive polished slab of granite, and the fact that it can be placed in the home.To save a considerable sum of money and to upgrade the flooring in the hallway, kitchen, living room or bedroom is quite simple, in strict compliance with the installation technology.

Important advantages granite

Another option glossy porcelain

addition to a mirror finish, which attracts attention from glossy porcelain, there are other significant advantages.

1. Variability application .At the disposal of customers all kinds of flooring.Based on personal preferences and the size of repaired the room, there is a possibility to pick up the tiles of a large or small size.Also, manufacturers offer products with different colors and textures.
2. acceptable cost .Because granite is an artificial material, the cost of its acquisition will be less than a coating of natural stone or wood.
3. Long service life and high strength characteristics .Even after many years of active operation on the surface rarely seen cracks, chips or other defects.
4. resistance to the damaging effects of moisture, temperature extremes and ultraviolet rays.
5. Adaptability to combining with heating systems.The natural properties of granite make it the best choice if appropriate masking "warm floor".
6. Lack difficulties care.Clear floor by using conventional detergents.

Care plated porcelain

Proper surface preparation - a guarantee of a successful placement porcelain

The disadvantages of this material should include a fairly time-consuming process of installation and the need for special tools due to the high strength properties of granite.At home, it can be done with the help of Bulgarians, although a straight cut, it is desirable to use an electric tile cutter.

Fig.4 Cutting granite

durability and beautiful visual appearance of the floor glossy granite depends on how serious the owner will treat the preparatory work.It should be noted that this material is rather fussy to install, in particular, it is important to ensure that the processed surface is perfectly smooth and had no differences.Only in this case, you can count on continuous operation of the finished floor covering.

Along with leveling or self-leveling cement-sand screed, should take care of thorough floor cleaning.Once the base is washed, it is necessary to degrease it and wait for the final drying, then there is no doubt a good adhesion of the adhesive composition.If you have installed the device for heating, they must be turned off and on completion of the work is not used within thirty days.

Among the prerequisites for a successful placement of porcelain polished tiles, should be called as competently executed layout and maintenance of the room temperature in the range of 5 to 40 degrees above zero.

The choice of adhesive for fixing stoneware

adhesive characteristics used in the installation process is very important, though no less important to his breed and observe the requirements for the application on the ground.Pick up the fixing agent must be subject to the conditions of work, the practical purpose of the premises, intensity of use and the specific properties of a variety of porcelain.

If you plan to carry out works (outdoor and indoor) at temperatures above 15 ° C, it is recommended to choose mixtures which solidify long.In cool weather or in unheated rooms on the contrary, should be laid on the granite quick-drying glue.The best adhesive for exterior use - frost, which provides a good connection even at negative temperatures.

Fig.5 Apply the adhesive

Stepwise description of the installation of glossy granite

When all necessary preparatory operations and prepared the tools, you are ready to spray glue on the surface.The easiest and most effective way to do this is with a notched trowel, allow to achieve a uniform distribution of the mixture.In some cases, if you are installing large format tiles, the adhesive composition should cover not only the floor, but also the back of the cladding material.

good results are obtained when there are no voids after fixing granite.Experienced masters recommend to do the work pieces to keep up with quarter of an hour to lay two to four tiles.Besides, this method will give a chance to avoid the loss of elasticity of the adhesive.After fastening of the floor covering, check the horizontal with a few levels.For alignment can be accurately to tap rubber mallet floor.

Generally, granite is not set back to back, which helps to minimize the likelihood of cracks and troughs.Using special plastic crosses, which are placed between the tiles, one can readily observe the same size sutures.With the same purpose is to take care of a small vacant lot along the walls, which will be masked by the skirting.The cut of the granite can be used as a plinth - like design will look very impressive and adds interior exclusivity.

Fig.6 Installation of plastic crosses

Grouting

After 24 hours (when used with an adhesive cement, only 10-14 days) after the end of laying, it is time to wipe the seams to cover purchased finished aesthetic appearance.Particular care must be taken to look for a suitable grout color (there are more than four thousand different shades).Despite the increasing popularity grouting white or transparent, in terms of practicality is wiser to use a mixture of color, choosing a shade 1-2 shades lighter or darker than the base color.

Grouting

to grout Requirements for granite

1. high strength and abrasion resistance.
2. Low shrinkage and cracking resistance.
3. high water repellency.
4. resistance to detergents, oils, alkalis / acids, solvents.
5. resistance appearance of mold, mildew.

Compare finishing materials

technology grouting and jointing

1. cleans the surface of the tiles with a brush or sponge with detergent.
2. grout Dilute with water.Thoroughly mix.
3. bottleneck rubber spatula a thin layer of grout on the glue joints.This one movement seek the maximum amount of the mixture applied to the seam and the second movement spatula remove excess grout from the surface of the porcelain.
4. rounded end rubber spatula produce grouting.We provide a tool in the seam, giving a beautiful relief of the surface.Grouting is performed immediately after the grout until the solidification of the mixture.

After 1-2 hours after the work should be cleaned from the remnants of granite surface trowel mixture.Cleaning is done two cutting cloth - wet (remove the bulk of the grout) and dry (from the surface removes the last traces of grout).The next day, you can wash the entire surface of the porcelain any detergent (acid-based), but this measure is at the discretion of the owner.

Are put such impregnation by roller or brush in two layers.The gap between the first and second coating layer is about four hours.Excess impregnating a surface of granite removed with a dry cloth.Complete drying water repellency and manifestation - after 24 hours.

Despite the fact that the porcelain with a glossy surface is very durable material, it is not recommended to be cleaned with abrasive powders and brushes with stiff bristles.It is best to use tools for cleaning ceramic surfaces, and special stain removers to remove "difficult" stains.

Video - Gres floor glossy

The instructions to the adhesive composition provides detailed information about in what proportions it should be diluted, respectively, any problems at this stage should not occur.The main thing - to put the dry matter in the water and not vice versa, and mix thoroughly until smooth.It is undesirable to immediately raise a large amount of glue, because it is suitable for use only for 2-3 hours.

Gres sufficiently dense material with a virtually non-adhesion, so it is not suitable for laying cement mixture of cement and sand.The adhesive should have an increased latching connection to be as safe.For this purpose, manufacturers add a special adhesive polymers increase the viscosity, plasticity and adhesion of the mixture.

use popularity adhesive mixtures of such manufacturers as: Polyomino, Ceresit, Eunice, of Knauf, Hercules, of IVSIL, Moment, MAPEI, Kreisel, etc.Price - from 200 rubles per pack packaged weight of 25 kg.

Video - Gres floor glossy