How to build a corner cabinet with his own hands

Corner cabinet allows the most efficient use of space of the room.If a set of furniture in the room is located in such a way that remains empty corner, it easily fills the angular design.Also, corner cabinets act as a connecting element between the cabinets that are located on contiguous walls.Corner furniture is easy to assemble their own hands, just like any other case furniture.

Species corner cabinets

corner cabinets are a wide variety of design configurations.They are divided according to the form on the inner filling, the material of manufacture and color.The shape of the cabinet is chosen based on personal preferences and the overall interior room.There are three main forms of corner cabinets:

1. Cabinet in form of a triangle.This is the most favorable configuration for small rooms.We have triangular side walls of the cabinet, it fills only the angular space without stealing space indoors.
2. diagonal corner cabinets.Different from the usual corner cabinets presence of a wall with a door.In such furniture more spacious interior space formed by the side shelves.
3. cabinet in the form of a trapezoid.Such designs often mounted in niches, shelves inside the cabinet have the shape of a trapezoid, the doors parted diagonally.Shows such corner cabinets pictured below.

Next classification divides corner cupboards by the method of installation.In this category they fall into, and built housing.Hull cabinets have the rear wall, not attached to the wall and are mobile - they are easy to move to another corner.Wardrobes have the back wall, attached directly to the wall.Separately allocated dressing rooms that resemble a small room for storage of clothes and footwear.

different cabinets and the internal mechanics of addition to the external design, which makes quite diverse.Cupboard equipped with shelves of different sizes and in amounts limited only by the scope of the cabinet.If you intend to store in it clothes, be sure to mount the hooks and hangers.All these nuances thought out at the stage of drawing development.

Development corner cabinet project,

necessary materials to assemble the corner cupboard with his hands, it is necessary to start to create his project.Assistance in this matter will be a variety of programs for the design of furniture, one of the most popular is a product called PRO100.The program creates a drawing, calculates materials and the necessary accessories.The drawing is created without the participation of the program manually on paper.Originally determined by the size of furniture, drawn side walls.They are the carriers, so it is important to calculate the project so that the sides of the enclosure were made of solid board.On the basis of their own needs and layout of the room, closet design solid monolith from floor to ceiling or leave free space on top.

side walls enhance the horizontal bridges, which are arranged at right angles.The width of this design is selected based on the size of the enclosure, on the average it is 100-150 mm.The rear wall of the cabinet to carry out from a thick material is inappropriate, they sewed MDF sheets.If you plan corps wardrobe, not limited by the ceiling, the roof is made of a single piece of material, the same is made and the floor.The size of the upper and lower pads are counting all horizontal partitions, subtracting from the data wall thickness.

inner space optimally divided into three zones.The upper zone - the mezzanine, is a single shelf.The middle section contains shelves and hangers for clothes or just hangers - it depends on the purpose of the cabinet.The lower part is also one separate shelf or drawer.Often in the bottom of the enclosure to make the storage shelf shoes.To lower the reliability of the design partitions strengthen vertical jumpers.

last stage in the development of the project - the creation of a cabinet door.This design is made swing or sliding.For the installation of the sliding door guides to secure the top and bottom of the opening line.Swing door is fixed in the classical way, on awnings.At the end of the project development is calculated all the necessary supplies and materials.A list, calculated the total length of the open ends that need to paste over the decorative edge.

All wooden parts for the enclosure are bought in the store and then cut under the right size.Cutting produced either by themselves or bought in the store a breaker material.All accessories sold separately, it is recommended to choose the products of Turkish and German producers, as the most durable and reliable.In the list of hardware must be present door handles and hinges, if mounted swing door.Also needed are closers, SCREW, dowels, legs, coat hooks, metal horizontal bar for trempel.Options accessories chosen based on the fact, what is the internal circuitry corner cabinet.Also decor SCREW locations become plugs in the color of the base material.

assembly algorithm and install a corner cabinet

build process depends on whether it is to collect a corner cupboard.Drawing pyatistenki or classic corner cabinet provides some of the nuances of the installation.Basically, it depends on whether the cabinet is mounted as a stand-alone structure, or it is created as an insert to the basic headset.In general, the process of assembling the corner cabinet looks like:

1. material is sawn in the drawing, it is checked that all the necessary components.
2. At the bottom of the product are set legs.
3. mounted to the bottom of the side wall via SCREW.
4. At the top of the side walls of the grooves are drilled dowel.Location data depends on the location of holes on the roof holes.
5. Treat PVA glue dowel, hammered them into the cover.
6. On the side walls installed roof
7. If going to the cabinet to the ceiling, it is necessary to change the position of the legs so that the roof is firmly rested on him.
8. After installing the cabinet attach hinges for doors or sliding guides.Install the mount for the shelves.
9. Mounted shelves, secured the rest of furniture, decorated hats SCREW.Corner cabinet with their hands assembled.

example of assembly of the triangular corner cabinet

now in more detail about kaksobrat corner cabinet with their hands on a specific project and sizes.This construction optimally fill the space in the corner will be minimal when the quantity of residual material.At the corner cabinet sizes can easily be broken individually, starting from a height of 183 cm will be needed for the manufacture of boards in the following sizes:.

1. 2 pieces 2.5 x 30 cm, length 180 cm
2. 1 piece 2.5 x 20.cm, length 180 cm.
3. 1 piece 2.5 x 10 cm, length 180 cm.
4. 3 pcs 2,5 x 7,5 cm, length 240 cm.
5. 1 piece 2.5 x 5 cm, length90 cm
6. Figured strap 90 cm. - 1 pc.
7. Decorative relief panel to finish 6-9 cm thick - 1 pc.

Craft must be such details:

1. rear wall cabinet - 1 board 2.5 x 20 x 183 cm
2. Sides - 6 boards with cuts at an angle of 45 degrees, dimensions - 2.5 x 30 x 76 cm..
3. Front trim - 2 board 2.5 x 7.5 x 183 cm
4. Corrugated board -. 2 pieces with dimensions of 2.5 x 42 x 183 cm
5. roof and floor -. 2 boards with dimensions of 2.5 x10 x 67 cm
6. Tabletop - 1 board with dimensions of 2.5 x 5 x 67 cm

Next wardrobe is going on the following algorithm:..

• Production shelves.

For shelves come from pine boards dimensions 2.5 x 10 cm, the width of which is further measured.The standard size of the board -. 17-18 cm at the sides on the boards make the cuts at an angle of 45 °.To make a clean cut on the material measure out the desired angle, hold the line to the opposite side, measure out the distance, which is equal to the width of the rear wall.From that point to the opposite side is delayed 45 ° in angle.

next board will be located on the opposite side.To it is applied ready-made cut, measure the angle.Thus prepare all the necessary details.In this structure, there are exactly 6.

• back side of the cabinet.

When all shelves are ready, they are mounted to the rear wall.To do this, measure the required distance between the shelves, put the mark and drill holes for them.Shelves are secured by adhesive and a 2 inch diameter bolts.

• Processing front corner edges.

Front finishing strip in the beginning is marked.Tags are placed in accordance with the arrangement of the shelves on the rear panel.To do this, the panel is applied to those already stuck shelves or distance vymeryat tape.

Shelves applied to reserved for them at the front of the place.Made holes for fasteners.When fastening the screws are mounted in such a way - from the inside of the product 50 mm, with an outer 35 mm.At each shelf 2 has to screw.For additional fixing using glue.The screws do not twist too tightly.

• Installing corrugated panels.

determines the width of the openings on the sides of the cabinet.The data obtained are cut out parts of the corrugated panel.Calculated their size and fasteners so that they adhere properly to the substrate.On the sides of the shelves glue is applied, the panel is fixed with screws 35 mm in diameter.Especially watching density rear mounting interface, as it will be clearly visible on the already finished product.On the front are allowed small marriages, later they all disappear behind decorative elements.

• Processing shelves.

At this stage, there are two ways to make a corner cabinet with his own hands.The first - to collect finishing the front frame and then fasten it in place.The second - first fix on the edges of shelves and decorative strips of glue 50 mm screws.In the second embodiment, the guide holes are drilled at the ends of the boards, make the holes 3, the number of screws.The bottom bracket is made to your taste.For fixing decorative strips is measured by the length of the upper front edge of the product, taking into account the side corners.

• Installation of doors.

These works are the most difficult and responsible.For the manufacture and installation of doors required specialized tools, in the absence of which need to be smart.This process requires a lot of attention, ability to focus and responsibility to carry out all the work.In the presence of a milling machine or electric saw is made easy with the door inserts.The thickness of the product must not exceed 18 mm, in some cases, decorative panel mounted in a frame.

Overhead doors are made of a wooden frame with a size of sides 2.5 x 7.5cm, or of the individual strips.Assembling the frame is made of 75 mm diameter screws.On the reverse side are mounted decorative grooved panels.You need to ensure that the finished door rests on the shelf.If there are two hinged doors, they are often complemented by a vertical bar, which prevents the formation of a gap between the doors.After the cabinet door installation is ready for operation.

few tips on installing the corner cabinet

• During installation it is necessary to lay the cabinet floor with cardboard or cloth, as during the execution of the works on it will scratch.
• If you plan to collect a ready-bought cupboards, before assembly is necessary to check for all the details.In case of shortage immediately contact the store where the purchase was made.

• Before installing awnings for doors is necessary to determine the direction in which the door is opened.
• If the cabinet is installed as an additional structure to the other furniture, it is necessary to make sure that the doors of adjacent cabinets will not beat each other.This problem is eliminated with the help of the limiter.
• attached plastic lining and canopy for mounting plate Before mounting the door to the walls.Fix the parts with screws.The handles on the doors are placed only after final installation and adjustment.
• Corner cabinet is connected to the module ready at least three attachment points.