Glass for interior doors - to help those who broke them

Glass for interior doors - especially exploitation

Species diversity, beauty and practicality - the main advantages of this material.Although previous fragility was a major shortcoming, there are now some species that strength, fire resistance and abrasion resistance are not inferior metal.It is worth noting that in recent years many people are interested in replacing glass in an interior door, even if it is a whole, due to cheap compared to the cost of replacing the entire door structure.

modern version of the material for interior doors accentuate any decor.Tempered glass and can have a thickness up to 10 mm, and its impact resistance to withstand severe loading.Despite this, we should not slam the door much, and you need to avoid the emergence of a draft, which can close the door with force.

If the blade was broken for some reason, you need to pull out all the pieces and make its replacement, as the door without windows do not look aesthetically pleasing, but also perform their proofing and other functions.

Installation of glass in the door - that we need to do?

Replacement of broken glass in the door will consist of the following main activities:

• dismantling a broken web;
• preparing new glass fabric to cutting;
• cutting, cutting and breaking the web;
• installation and fastening.

Installation of glass in the door can be made with the help of rods, wooden frames or putting it through the slot.Shards of broken former insert must be removed, after removing the glazing beads or frame.Before you replace the glass in the door, you need to cut new.Before cutting it should be prepared.

Because the dirty surface with grease spots cut badly and the lack of depth, while breaking it can easily crack, it is wiped with a cloth on both sides of a wash water and soap solution.If the material was stored prior to the start of work at low temperatures, before cutting it is necessary to acclimatise at room temperature and then wipe with a clean cloth.

To avoid inefficient use of material, when a significant portion goes to waste, cutting scheme is first better to do on paper.Clipping window if it is transparent, it can then be used to replace or vents Frames manufacture.

Glass Replacement at the door - right cut out fabric

The main thing that should be taken into account when cutting: fixed glass covers folds to three-quarters of the width, that is, between the rim and the edge of the fold webs must be a small gap.For example, if the distance between welts flanges length - 1000 mm, and the width - 500 mm, it means that the glass must be 995-998 mm and 494-495 mm, respectively.

This gap will easily replace the glass in the interior door, and will protect it from destruction in case of swelling of the wood.

leaf cutting is placed on a flat surface.If you allow complex cutting scheme, the sheet of paper with the drawing can be put under the work item.A straight line is cut by a glass cutter and ruler.Cutting the need to uniformly pressing the tool along the line cut, you need only to hold them again.For curved cutting patterns to be manufactured of plywood or fiberboard.Glass breaking towards the notch.

After replacement of glass in the door frame or glazing beads are put in place and secured.Independently change the glass in the door is very simple, and yet you must have a certain minimum knowledge and sleight of hand, especially when cutting the new web.