Washing machine do not rinse : causes, what to do if you do not rinse the machine and presses , wipes , but do not rinse

Rinse - this is one of the most important functions of washing machines.Without it, we would have had to rinse his own heavy, wet clothes in the bathroom, and then another, and pressing it.That is why the appearance of automatic stiralok performing the entire wash cycle, until the drying has become a real salvation for the hosts, as lifted from their shoulders a greater share of domestic work.

However, a washing machine - it's all the same equipment, which has the property to fail.If the unit refuses to do its job, then there was a crash, you want to eliminate immediately, otherwise you'll have to wash Tutor.

On why washing machine ceases to rinse the laundry, and how to solve this problem, read below.

If the washing machine suddenly "hangs up" towards the end of the wash - the drum stops rotating, the water remains inside, and the washing program is completed, most likely, the problem relates to rinse mode.Tom can be two main reasons.Tell us more about each case.

If the drain is run or spin, water is still in the drum, the problem is probably not in the control unit, and in the drain system.This is not the worst case scenario, as much to clear the blockage formed easier than to fix the electronic module.

If all these elements in order, we recommend that you also test the water level sensor.In case of malfunction, he can signal that the tank is empty, when in fact it is water.For this reason, the rinse mode is not started.

If the drain and spin modes work correctly, but to rinse the laundry stiralka it does not wish to be found the cause of the face of the unit.Most often, this problem is associated with the breakdown of the control module or the heating element.

In the first case, not having expertise in the field of electronics, to do anything is unlikely to succeed.It will be best to give the machine for repair to the unit to flash, or replaced with a new one.If that's the fault of PETN, you need to test it.It is quite possible to do it yourself, read more in the article "How to check the heater washing machine?" Or see in the video below.

after washing to the laundry was always perfectly clean and fresh, without stains of powder and conditioner, you need to constantly monitor the to rinse and drain the system to work properly.

• Use only high quality detergent that dissolves quickly in water and easily washed off.If you notice that after washing powder began to be on the things in the tray or try to change the tool.
• always exactly follow the operating machine instructions: do not overload the drum and choose items for the respective washing program.