How to calculate the number of bricks for the construction ?Calculator brickwork

Calculation brick masonry walls

The first thing to do - to determine the thickness of the wall.This option will depend on the objectives and functions it will perform.Additionally, when selecting the thickness of the load should be considered, properties of durability and heat conductivity.In construction there are the following thickness: 250 mm - one brick;380 mm - 1.5 brick 510 mm - two bricks 640 mm and - respectively, 2.5 brick.In our climate the best option would be the thickness of two and a half or two bricks.

also important to know to calculate the size of a brick.Make three types of bricks: double, single and one and a half brick.To ensure the ease of masonry and increase the speed of work done well opt for a double-half.However, single brick is good in aesthetic terms: it looks better.

So, consider the parameters of a brick:

• single brick has the following dimensions: 250h120h65 mm;
• bonder brick release of this size: 250h120h88 mm;
• brick double - 250h120h138 mm.

All values ​​are known, and now is the time to proceed with the calculations.First, we calculate the entire wall area by multiplying the height of the wall at its perimeter length.We count the number of bricks is then used for laying a square meter.All data are located for easy calculation in the table.

Calculation of brick for lining

Facing work, as a rule, do not require a large consumption of bricks, because the walls should not be thick.Often, such a measure is necessary for the sake of enhancing the aesthetic component of the building, as well as for its strengthening and insulation.

To calculate the consumption of bricks that will be needed when facing the work, taken the standard parameters of one unit of the material and the width of the joint solution - 10 millimeters.Next, the calculation is made as follows:
100 / (25 * 6.5) = 61 bricks.

If necessary, the addition of any non-standard elements such as arches, or the pattern of the collar should be added to stock a brick.Grinding and cutting will take a lot of bricks.

Calculator brickwork

order not to mess with the calculations and quickly proceed to the construction of the building, you can use a calculator, which is available online.To use this service, it is important to know the parameters of the future of construction, number of doors, the level of glazing area of ​​all partitions.By defining these parameters, be sure to take the help of experts.Go directly to the calculator can be at the following link: http://www.kirpich.info/calc/