Build Daily

Problems

August 12, 2017 18:06

How to get rid of the plaque in the bathroom on the tile in the bath .cleaning Tools

click fraud protection
Clear the plaque in the bathroom
  • reasons
  • Removing plaque
  • application of funds, depending on the surface
  • How not to spoil the surface
  • Preventive methods
  • yellow plaque on the bath

sparkling clean bath - is notonly clean the floor, but also to a high gloss polished plumbing and tiles on the walls.If you do not perform regular cleaning of the premises, then soon enough, even the most high quality refurbished and modern bathroom and a running start to look untidy.All because of plaque, which eventually appears on the walls and plumbing.In this article, we'll show you how to deal with different kinds of plaque, which is why it appears, and what preventive measures can help you less likely to encounter this problem.

After cleaning

reasons

consider more types of plaque and their causes.

raid on plumbing

Since sanitary products actively react with water, they quickly formed limescale.The water flowing through our pipes is full of various minerals and lime.

Once water gets on any surface and evaporates, in its place are lime particles.First, they are barely visible to the eye, but as the particles become more and increases the thickness of the plaque.

The raid on the plumbing

lime, or as it is called, limestone, can appear as on the toilet, in which flows the drain tank and the taps on the bath, on pipes, etc.In addition, it spoils the appearance of the product, it also complicates the process of its operation.

The raid on the toilet

Plaque on the wall

When we talk about the raid on the walls of the bathroom, we mean a soap plaque, which can be formed not only on the tiles, and PVC panels, boards and other surfaces.The hot water mixed with detergent substances, in the form of water vapor settles on the walls and leaves a thin layer of soap.Over time, this layer turns into a soap plaque, which is easy enough to remove at first, but over time it becomes more difficult to clean off.

Plaque on the wall

fungal plaque

High humidity in the room provokes active development of various fungi, which often can be found in the seams between the tiles in the bathroom and the junction of the wall and difficult to clean places.

fungal plaque is not only spoils the appearance of the room, but also harmful to health, therefore it is necessary to actively deal with the help of antibiotics.

Fungus on the tile

raid on cranes

Since most houses are now used nickel-plated faucets and taps, any stains on them immediately become apparent.If they are not cleaned regularly, they can be formed as a soap and limescale.

Plaque on cranes

If faucet somewhere occurs, you may experience even with the problem of rust buildup.It is the most difficult to clean.Also, rust can stain tap and other non-metallic surfaces such as the bottom of the sink or bathtub.Therefore, it is necessary to deal with rust in a timely manner.

Rust on the blender tub

Removing plaque

Every housewife has its own ways and methods of dealing with a touch in the bathroom.Some people prefer to use proven folk remedies time.They do not contain hazardous chemicals and less aggressive to the treated surface exposed.

Means for cleaning bathroom

Someone prefers the purchased detergent.Currently, the market there is a serious competition between producers of various detergents to clean the bathroom and toilet.However, the principle of action in all of these funds are similar.Let's look at them more closely.

matter what detergent you use, you will need to stock up with rags, brushes, sponges and other tools.In order to clear plaque from hard to reach places and the seams between the tiles is useful to you an old toothbrush.Also, you'll need rubber gloves to protect your hands.

Folk remedies

The first is the most popular way to remove plaque - is the use of various acids, which is in almost every home.

  • Acetic acid should have a concentration of not less than 25%. necessary to prepare a solution by mixing it with water in 1:20.It is best to dilute acetic acid, boiling water and then allow the solution to cool slightly.Such a solution can scrape plaque from faience, nickel-plated, enamel, glass and metallic surfaces.However, for use in acrylic plastic tubs and it is not suitable.
  • Citric Acid acts on the surface is more delicate, so it can be used on all materials.To acid acted, it must be applied with a sponge on all surfaces covered with plaque, for up to 3 hours.After that it washed off with plain water.Dilute Citric acid in warm water as long as it does not completely dissolve the crystals.On average, a glass of water leaves a pack of citric acid sold in any grocery store in the spice department, or for baking products.
  • Oxalic acid is used in many cleaning agents purchased, where its concentration is very high. If you're looking for a milder version of the cleaning agent, you can prepare a solution of water mixed with oxalic acid in the desired ratio (usually 5% solution), and put it on a surface coated with a touch of a couple of hours.The acid will corrode the entire raid and you only have to wash it only with water.
  • Some are used for cleaning rust and even hydrochloric acid , but here it is necessary to exercise the utmost caution. In no case should not be allowed contact with hydrochloric acid on the skin, as well as on metallic surfaces. But it is ideal for removing rust from enamel surfaces.After using hydrochloric acid, the surface should be thoroughly rinsed with running water and wash ordinary detergent.
  • less dangerous way to remove rust - to use a mixture of ammonia and hydrogen peroxide. Mix ammonia peroxide in a ratio of 2: 1 in a separate jar, apply the mixture on the cloth and wipe her dirty areas.After 10-15 minutes, the mixture can be washed off.
  • Some housewives used to remove plaque soda. However, with such a tool, you must be careful, because the abrasive particles in it are able to scratch the surface.On how not to harm surfaces during cleaning, will be discussed below.
Acetic acid
Lemon acid
Oxalic acid
Hydrochloric acid
Soda

Chemicals

conduct cleaning chemicals much easier and usually faster.You do not need to measure out the desired proportions and mixed by the solution.All the necessary components are already used in detergent.You just have to put means for a sponge that has been soaked in water, wiped her face, if necessary, and then wash off the plaque and means plain water.

chemical detergents sold in the form of a gel, powder and spray.Before you buy, read the information on the label. It should be specified not only how to use a cleaning agent, but also a means designed to clean any surfaces.So, for example, for acrylic baths are not suitable abrasive powders and cleaning agents containing acid.

Detergents for bathroom

What is more concentrated cleaning agent, the less time you need to keep it on the surface to be treated.This time period may range from several minutes to several hours.If you are dealing with a touch stuffy, then deal with it at one time does not help you, no means no matter how much you do not keep.The procedure will have to repeat the treatment several times before you manage to get rid of the annoying pollution.

Cleaning bath

application of funds, depending on the surface

type and the material surface on which the coating was formed, largely influences the way it should be cleaned:

  • least whimsical ironproduct. They can be cleaned with almost any media except strong acids such as hydrochloric acid.
  • enamelled and chromed surfaces can not be cleaned with abrasive powders or other agents that are able to disrupt the integrity of the coating. them clean various aqueous solutions, gels and other liquid detergents.This also applies to products made of glass and porcelain.Get rid of plaque on the enamel, and return it to the original whiteness will also bleach.
  • most careful treatment requires acrylic tub .It can clean off the plaque using only natural, natural acids or specialized facilities for cleaning acrylic surfaces.After treatment, the surface of the acid solution, experts advise to neutralize its impact by any alkaline detergent.
clean the mirror
clean the valves
clean the toilet
Caring for acrylic bath

How not to spoil the surface

not to get in that proverb, "We wanted the best, but it turned out asalways, "before proceeding to clean the bathroom, carefully read the instructions on the detergent packaging.If you use them for the first time, we recommend you first try it on a small, inconspicuous area, and not to apply immediately to the entire bath.

We do not recommend using hard and metal brushes that scratch the surface.Use porous sponge and soft cloth.In an extreme case - a brush with soft bristles.

Using a soft brush

Preventive methods

In the fight against plaque, the main thing - prevention. The more often you clean the bathroom properly - the less likely it is that you have ever faced a problem of ingrained plaque. as preventive measures to combat plaque is not necessary to resort to the potent drugs.It fit regular dishwashing liquid, powder, liquid soap - in short, everything that there is in your home.If you are too lazy to wash off the detergent after application, use liquid glass cleaner.Since most of them are made on the basis of alcohol, it instantly evaporates from the surface, and all the dirt will remain on the rag.

Caring for the tiles in the bathroom

To combat the fungus and mold at least once a week using the bathroom chlorinated detergents or simply diluted bleach or white.Remember, however, that can not be chloro simultaneously mixed with various acids, since in this case become poisonous chlorine vapors.

Wash floors in the bathroom

yellow plaque on the bath

Water that flows from the tap, we often contains primesti iron.After it dries in the sink and in the bathroom can be yellow stains rzhavchiny.Predotvratit appearance of such spots makes regular use of bleach. If rust stains have become too obvious and normal bleach can not cope with them, will help the following means:

  1. Prepare 2 tablespoonsfood and soda ash, brightener 50 g and 50 g of vinegar.
  2. beginning on a wet surface is applied a mixture of soda and baking soda, which is rubbed smooth circular motion for 10 minutes.
  3. Then a mixture of bleach and vinegar is applied from above and left still for 30 minutes.
  4. surface is washed with running water.
Removing the plaque before and after
instagram viewer