Brushing the wood with their hands

What is the brushing of wood?

Nature teaches man to be a man, presenting him all sorts of surprises.It showed that the natural conditions make a timber - it is aging.Over time it wears out, losing loose layers of the structure, leaving more dense.As a result, we see the whole masterpieces painted by time.Man spied from nature's plan and achieved the same result, only a short time.

brushing process contributes to strengthening of timber structures, unlike natural aging.When processing wood determining the composition is protected from decay processes, as well as from insect damage.

brushing tree - a kind of reception decorating wood surface.Its essence is to give the material more attractive appearance to implement design ideas.This fashionable and popular areas in the decoration, as expensive to simulate the wood to buy enough material at an affordable price.You can make oak parquet with white tint, gray-green or brown with golden streaks wardrobe.This technology is subject to all.

brushing wood technology

process of brushing the tree can be done by using a drill, sander or try to cope on their own, without these tools.Several synthetic abrasives and wire brushes will be sufficient to purchase, as well as some tools that will be useful in polishing and grinding of wood.

Overall brushing technique is performed as follows:

• material handling metallic brushes in order to remove from the surface of soft wood fibers;
• grinding the cleaned surface using a polymer abrasive brush or emery cloth;
• special dyes that contribute to the creation of "the effect of antiquity";
• polishing work, and lacquer coating.After drying smooth out the surface of each layer with thin skins.

brushing his hands

Step1.Preparatory work

to start harvesting the wood slightly moistened to the room does not scatter dust during machining.Take a wire brush with a hardness, which is suitable for the selected timber.It is important that the bristles could remove all the soft fibers without touching solid.Move tool is recommended in the course of the fibers adhering to the low speed.If you carry out brushing his hands, you need to have patience, because to work on this stage will need a lot of time.

Step 2. Step grinding

Take polymer brush to which a pre-abrasive and produce a first sanding.This removed all pieces of fiber surface roughness.Then shall assess the quality of structuring.If you do not like the result, it is necessary to deepen even more groove.

This stage gives vent to the creative vision, since it is at this stage may be adding to the finishing of decorative elements.You can take advantage of all irregularities and give them a natural look as a result of rough grinding.It is also possible to paint in order to give effect sostarivayut.

3. Step Polishing

For the final polishing is advisable to use a hair or sisal crack that would support a polished wood details view.Thus it is possible to achieve decorative texture of the material.

If you are running manually, you should use sandpaper with fine grains, which will help in the creation of
polished surface.For painting and varnishing is necessary to completely dry the surface and remove all dust.

Step 4. Paint

Lung decorative species can be achieved by patined painting, gilding, and other options.When using the stain you can thanks to the emergence of textural contrast images age the product.

will be interesting to look gold paint in the recesses and microcracks in relation to the natural coloring of the wood.After drying the paint should again polish the surface to get rid completely of the irregularities that have emerged in the process of painting.

Step 5. Lacquered

varnish surface.This work is done only after a thorough cleaning and drying of wood.If brushing is used for the future of flooring, parquet lacquer using a special formulation that will keep for a long time, running the floor quality.

Compliance Safety

should remember observing the usual safety precautions when working on brushing the surface of the wood.This is especially true of work with a special tool.I do not want because that wood chips fell into her eyes.Therefore, it is necessary to wear gloves, safety glasses and, if necessary even in a respirator.The latter measure is used in order to protect their health from the harmful effects of chemical compounds, which are available in wood stains and paints.

Application technology

brushing brushing - a process which is characterized by accessibility and has a variety of decorative solutions.That is why this technology is used everywhere.The most common scope - registration facilities and manufacturing interior items.The halls and living rooms equipped with shelves, columns, mantels, wall panels of aged wood are fascinating and provide comfort.

today increasingly appears fine wood furnishings with aged elements and details.Cabinetry in the manufacture of such furniture using a cunning trick: take the wood surface, untouched by bark beetles and process it.This invoice can not be played under artificial conditions, so these products are highly valued.