Installation of plastic moldings using the fasteners , screws or glue

properties of the plastic plinth

plastic floor plinth is a serious competitor for all other species of this material.In particular, it has many advantages over a wooden plinth.After all, the latter is not so easy to fit, exposed to moisture, must be treated before use.In PVC skirting such problems simply do not have.Thus, its main advantages are as follows:

• can be used in completely different areas , in bathrooms and living rooms.Variety of colors allows you to choose the most appropriate for a particular interior.
• Enough durable .Its service life is considerably higher than that of wood.
• This flexible and easy-to-laying material.The beauty is that it does not need further processing and dyeing.Plinth itself is easily cut.
• has high resistance to moisture .This material is not decomposed by exposure to water and can easily be washed almost any cleaning agents.
• fireproof and resistant to temperature changes .Besides, it does not support combustion.
• not fade in the sun e and long retains its original appearance.
• Plastic moldings much cheaper wood .

kinds of plastic plinth

Depending on the application distinguish plinth versatile and under carpet.First it fits perfectly any floor surface, whether linoleum, laminate, tiles, wooden floor.The second has the form of strips L-shaped cross-section.That is, it is a groove, which is embedded in the carpet belt. Depending on the substrate are : plinth made of foam hard, rigid and semi-rigid PVC.

first have the form of extruded profiles and are distinguished by low density, are the most popular to date.Second, rigid PVC, look like the previous ones, and are designed for easy and simple cleaning of the room.Well, and the third - a flexible material or, more simply, Plinth tape.They have an elegant design and a variety of colors, can mimic stone, wood, metal and other surfaces.

Plastic skirting board installation

Once you are undecided, there is the main issue - how to install a plastic plinth? At the initial stage it is necessary to measure what amount of material required.To this end, it is important to know the perimeter of the room.

example, the perimeter of the room is 20 m, and has a length of 2.5 m, respectively 20:. 8 = 2.5 profiles.This amount and need to buy.

also pay attention to the cable channel.If you need it (ie, it will be hidden wires), then select the type of floor.In the second stage proceed directly to the installation.They can be installed in three ways : using glue, fasteners and screws .

In the first case, the so-called "liquid nails", special difficulties are not here.For this metered length of material and smeared with glue, then is applied to the wall.Also attached plug couplings and angles.

second method is considered the best, as it can then be easily dismantled material.It's enough to just remove the attachment.So, first things first.To begin, measure the length and also make the layout at a distance of 30-50 cm for the screws by means of which will be fixed, and the plinth.From the corners should not be a gap of more than 10 centimeters.Then just screwed screws.

And finally, the third method involves the installation with screws.This is a crude method, but reliable.The baseboard need to drill holes for the screws of the future.The distance between them should be about 40 to 50 centimeters.

Then set the profile to the wall and make marks on it (just in those places where the holes were drilled).Then in these places on the wall also need to drill holes and insert the dowels.The last stage is applied moldings, dowels in the set screws.

Installation of plastic moldings, video editing technology, which is represented on our site, will be successful and smoothly, in compliance with all of the above recommendations.