How to create the perfect design of the attic ?

think through the design of the attic

Before starting design attic rooms, carefully inspect and let us remember how erected truss system.You have stone house?So, based on the rafter foot mauerlat, and, most likely, no extra support (such a system is also called the hanging).However, even if the support is there, it means only that the attic can reach a width of 12 meters, and it gives a considerable area of ​​the premises.

If the rafters are attached bongs, this advantage can also be found, for example, it can be mounted on a horizontal plane of the ceiling. If the spacing between the additional supports is large enough, and they are in pairs, you can use them as a basis for cross-partition .A sufficient area at its space can be divided into small rooms and the longitudinal walls.

also planning to make the design of the attic with his own hands, consider unsuitable for habitation sites under the slopes at the edges, where neither stand up or even sit comfortably fail.If you have both the support and the diagonal tightening, you can come up with interesting options including these structural elements to the overall decor.

Create design attic

First and foremost when you make a room under the roof - finishing the inner surface of skates, of course, performed after a thorough insulation, coupled with their waterproofing.If you have a warm multi-layer roof with filling of foam, internal insulation is likely to make a symbolic and almost completely open rafters.

In this case, you can make the decor of the attic, hiding them entirely under the sheets of plasterboard, or, conversely, to allocate the rafters, oblitsevat the same material.It is the same with additional supports, along with diagonal puffs - they can be turned into small partitions, dividing the space into separate areas, or leave as is, a plasterboard covering.Inclined

attic windows should be done considering that penetrates through them by 40% more light than a vertical window openings into the room.

Puffs can be decorative, from thick rough branches, after lining the walls plasterboard, but in this case it is necessary to leave the rafters at sight or fill over the finishing imitation rafters of the same branches.It will look attractive beams, natural color that will highlight varnish, it is also possible to make the texture of the browning time.

But in this case are the same color must be included in the finishing facilities, in particular, can be on the perimeter of the room to put a wooden panel across the bottom.And if you go further and fully obbit rays inside a tree, make solid wood flooring, we get the design of the attic in rustic style.

Maximum effective interior design attic

If you have the space, part of which can not be used for the movement or placement of furniture, with what are often faced by developing design attic space, you need to find those portions of practical application. The most common variant of the effective use of low areas placed under the eaves of the roof - a production of built-in cupboards and cabinets with shelves and doors .

In these places it is possible to arrange outdoor lighting, which at night will create a very welcoming atmosphere.Another way to create the interior design of the attic with a view of the uncomfortable zones - it take longer ramp area glazing.Bold decisions will make the roof completely glass, using large packets.

This option is not suitable for the harsh winters with very low temperatures, it will be more appropriate in areas with a mild climate.However, if you just make a high-floor windows, and almost to the roof ridge, you get a very original way.And how to make the attic in the spaces between the windows, it is not difficult to come up with.You can arrange small tables with flowers and souvenirs, there is a place for your TV with video.