ventilation mode - smart appliances to guard your comfort

Why in the house mechanical ventilation?

Ventilation provides fresh air into the building, and simultaneously cleans the dust and heat.A characteristic feature of all these systems is pumping air into the building, while the displaced air is removed through a special box and taps.The advantage of this device is considered to be able to conduct a thorough cleaning of the air, humidity and the temperature of which can be adjusted.

Conventional ventilation systems represent vent ducts which are mainly found in bathrooms and kitchens.Through them the natural way out polluted air, and cracks in the windows and doors carry the pump function, feeding fresh air from outside.This uncomplicated scheme called natural ventilation plenum.

But such ventilation has certain disadvantages - its capacity to act depends on the wind speed, temperature and other factors.And with the advent of plastic windows, it became ineffective.

Feature ventilation

began to use a special device to increase the ventilation air.Such devices have a different configuration.The easiest method is to set the supply fan in the hole in the wall or in a window.The disadvantage of this method - the arrival of very cold winter air.

The supply air should not be below 16 ° C.Otherwise, the temperature difference may contribute to disease in humans or damage to furniture and peeling wallpaper.Accordingly, the normal system of such ventilation should include a multi-level system of protection against overheating and heater.In addition, there must be an air filter to the air with a lot of dust did not fall, and good insulation.

ventilation system has three modes of operation:

• winter mode, heating the air using the water heater;
• summer mode, cooling it with a water cooler;
• standby mode, there is control of the freezing of the water heater and air temperature when power off mode.

ventilation modes

Summer mode ventilation can be both heated and without.Heating occurs when the fresh air temperature is below 5 degrees, than has been installed.This device operates in the ventilation mode, but when the temperature is lowered relative to the limit, included heating to a given temperature.Once the required temperature is achieved, the adjustment ends after 30 minutes.

Summer mode without heating the air is as follows.The system also operates in the ventilation mode.If the temperature is less than + 5 ° C, then the device goes into standby mode.

way, if the system operation does not match the time of year, that is, outside air temperature, the device will beep.

Winter mode has heating function. Ventilation heating provides heating of the outside air to the set temperature.Set it can be in the range 15 ° C to +30 ° C.If you include this option at more than + 5 ° C, then the system beeps and goes into summer mode.

In addition, there is also a mode of high humidity, such as in the rain.There is a warming of fresh air to the set temperature of +15 ° C to +30 ° C, and fan speed is minimal and does not change.

One of the most popular devices is a split system with forced ventilation.It is an excellent replacement for the air conditioning and ventilation, so successfully solves the problem of ventilation of premises.

In addition, any device is better to use filters for ventilation.They purify the air that enters the building.They also carry out medium and fine cleaning, their use ensures longer service life of ventilation and no need to repair it.