The entire process plastered walls under the wallpaper .Perfectly smooth walls

plaster wall under the wallpaper - the right to choose a mixture

Before you start leveling the surface, you need to determine the bonding agents mixture, which range in the construction market is simply amazing.Distinguish two main types of material: dry mixture and is already ready, made in the form of a paste, the quality they are not particularly distinguished.For this reason, the choice is to stop on the version that will be as comfortable as possible to deliver to the destination.

Consider the main types of bonding agents mixtures intended:

• leveling.In the event that differences on the surface of the wall is about 3 centimeters, you will definitely need this type of mixture, which is also referred to as "start."

Attention!Before you apply a layer of putty, it is necessary to rid the surface of the old materials, as well as its carefully primed!

• second type of bonding agents mixtures called "finish".It is used when the walls are lined previous type of mixture.Typically, a layer of "finish" is too small and does not exceed 3.1 mm.

Tip!Before finishing process the surface layer of the mixture, it is necessary to check the surface for the appearance of cracks on it and then apply a coat of primer emulsion.

When it is necessary to use reinforcing mesh?

Putty walls under the wallpaper with reinforcing mesh is necessary in the event that the surface is characterized by sharp and deep differences.Using additional reinforcement will allow several times to increase the service life of the walls without re-intervention.In addition, the reinforcing grid will eliminate the possibility of cracking, which will positively affect the waterproofing and other damage to the mechanical type.

Note!Fastening material takes place by means of dowel-nails.The frequency fasteners will depend on the surface structure.The more you strengthen the grid, so it will be more tension, which will apply a coat of high quality finishing materials!

is worth noting that for the wall surfaces ideal mesh, the size of which was 25x25 mm cells.In addition, using this element, you can greatly reduce the consumption of bonding agents mixture on uneven alignment.If the wall is not suitable for leveling special mixes, you can use plain old drywall.

technology

process Just note, if you want to thoroughly examine a process such as plaster walls under the wallpaper, the video is available on our website.Thus, you can not only understand the technology of the work, but also to hear the advice of experts.Despite this, we offer you to get acquainted with the oral form of the process algorithm:

• First of all you need to prepare the base of the walls to the subsequent processing.To do this, we get rid of the old materials.

Tip!If you have previously been on the walls wallpaper, a small area is wetted with a roller, after which they will be removed easily with a spatula .

• When you got rid of the old material should be thoroughly primed surface.Do not forget that time is completely dry primer varies from 2 to 4 hours.
• Then you can safely proceed to the application layer of the starting mixture of bonding agents.Usually this is done in 2-3 sets.Of course, after each plaster give dry completely.

recommendation! For the convenience of work submitted by the process should start from the top, gradually falling down!

• When all the layers are applied and dried, the surface must be primed again.After it has dried, proceed to the application of top coat mixture.
• After complete drying of the surface should be cleaned with sandpaper or a special trowel grid all small defects, then the wall again primed.

This preparation for wallpapering completed.It is safe to proceed to the next stage of decorating the walls, but that's another story!