Examples of moldings in a corner bath .Review and examples in the photo .

What cornice better.Making the right choice

coming to a store and look at first, like everything, but we settling the bathroom, and therefore must take into account every detail to maintain harmony.Let us not, we put on a corner bath straight cornice, we break the interior geometry.It is necessary to eaves repeats the shape of the bath.

It is advisable to choose a tough product to which you can hang curtains from a variety of materials, and not be afraid that they sag and lose their shape.The rods are now sold the most diverse - semi-circular or angular eaves, can be very useful to the appropriate corner bath.Of course, very difficult to find specific forms, they have to be ordered individually, and they will cost more expensive, respectively.

special attention when choosing a cornice should be paid to the strength of the product, its durability in operation.These qualities are directly related to the material from which the rods are made.At the moment there are two main materials - metal and plastic.

1. Metal are aluminum and stainless steel.The first reasonably strong, resistant to temperature and humidity, do not corrode.But matte appearance and the ability to bend and leave a gray mark on everything with which they come in contact tightly, do not play in their favor.Stainless steel with a chrome finish - a good option.Rod made of stainless steel is strong, does not bend, it can be given any shape.
2. plastic ledge for the bathroom, of course, looks nice, it can be any color, easy to install, but is short-lived.It lends itself to the action of time and water, gradually rastreskivayas at fixing and bending under the weight of wet curtain.

choose a cornice on a corner bath, it is necessary to think about-mount rings for curtains.There are some nuances that need to know.The market can find a metallic, plastic and composite made of metal with a plastic coating.Conventional metal have a bad slip and will scratch or damage the curtains cornice.Plastic rings are not solid.Best option - a combination - and strong and have a gentle glide.

Fasten the cornice above the bath

So, all you need is bought, now we have a little strain to strain or someone to stick to the walls of the bar.In principle, this process is not complicated, any host can handle it, and to help him to the ledge attached installation instructions.However, it does not always take into account the quality of instruction in the walls and cover them, so you might require additional fasteners.

Follow these points and you will succeed:

1. first try on the cornice to the wall in the intended mounting location and at the correct height, put a pencil mark.Remember that under the ceiling append curtain will not do, is to be ventilation.From the ceiling back down 10-30 cm.
2. start drilling holes, but you can be sure that at these points there is electrical wiring and water pipes.If it is necessary to drill tile, take a drill with pen-tip.Brick succumb Hammer drill type, and take concrete with hammer drill diameter needed.
3. we exhaust holes in wall plugs.
4. Fasten the cornice on the screws using a Phillips screwdriver PH brand.
5. If the walls are finished with gypsum board, it will be useful dowels "butterfly" type or "by Molly" screws.

work is finished, hang curtains and you can enjoy your shower without fear pour half water.