Volume plaster walls , or simple steps to create a masterpiece

concept volume plaster

To clearly know for yourself what is the bulk decorative plaster, just look at the walls treated with this material and having a non-uniform surface with various knobs and potholes.Sometimes, to create a clear picture.For example, the entire wall can "fly" butterfly or "grow" tree.It all depends on the specific wishes and requirements of the design.

This 3d plaster is suitable mostly for decoration of apartments and houses, restaurants, cafes, cinemas, clubs, shopping centers and concert halls.In general, wherever you need to create a truly extraordinarily beautiful interior.Do not be surprised if by going to the next cafe, you will see the painted wall with the volume elements (images of angels, cups of tea and flowers).All this - the volume plaster.

If we talk about the properties of the decorative mixture, it is a thin layer, a thick, for facades and internal works.Among the main advantages distinguish: high mechanical strength, environmental cleanliness, resistance to alkalis, as well as to washing and abrasion.If it is used for facade work, it's this: high frost resistance and resistance to any precipitation.

Application volume plaster

So, how to create three-dimensional elements with their own hands?To do this, first of all prepare the walls under the decorative plaster.Since they removed the old and unnecessary cover, remove bitumen and grease stains, soil and trowel.Before starting work, they must be clean, dry and smooth.Further, a decorative layer is applied to the initial mixture a total thickness of about 5 mm (referred to as a ball or a filler).

Then made a special roller for finishing putty.Do it with your hands.Cleaned past roller coating (usually paralon or tissue) and is attached to the axis of a new, self-made paralonovym coating.The main point which is taken into account in its manufacture - it has (the higher it is, the more non-uniform surface) depth.Often make rolls "puff" or from scraps of material.

After the roll is ready, a thin layer of topcoat.At the same time, filling solution is prepared according to the recipe given on the packaging.But he must take the form of a creamy mixture.The roller is dipped into the solution and begin to apply the plaster on the wall in the upward direction.Drawing on the walls turns out exactly such a roll was made.

That is, ridges and bumps on the surface of the corresponding recess on the platen.Also, it will be seen a definite trend of repetition.It is important to know another point of the substrate. In no case can not be too put pressure on the roller, as in this case, the texture (bulges) will not appear. Movement should be light and sliding.After the surface has dried, the individual elements are sometimes dyed acrylic paint.

How to make a printing plaster?

If you want to create on the walls is not just an imitation of a surface, but the real picture in the form of butterflies, dragonflies, leaves, flowers, you will need a stencil and some tools (masking tape, spray adhesive, roller, paint, putty knife).Plaster used homogeneous and fine-grained.Drawings volume plaster made according to the following technologies:

• with glue or adhesive tape attached to the wall stencil.
• top of it a layer of plaster is applied with a spatula.
• carefully remove the stencil at a time when the mixture is not completely dried up, but managed to grab.
• stencil carefully cleaned.
• At the last stage of the volumetric image can be painted.