Heating in a private house with his own hands made ​​of polypropylene

heater Choice

1. In the case of existing gas distribution system in the area, you must purchase an automated gas boiler, which is present in the device and pump protection system.If the chimney in the house is not built, the boiler design must contain a closed combustion chamber, as well as a coaxial tube, the function of which is the summing up of air outlet gases released during operation.The conclusion of such a tube to the outside can be achieved through a wall space heater
2. best option, supplied by mains is automatically controlled boiler includes a pump, expansion tank, as well as a security system.To install a heat source, do not necessarily seek the help of professionals
3. the presence of solid fuel heat source to mount the heating system in a private house with his own hands made of polypropylene, you need to have the skill of welding pipes or better to turn to specialists, as the technology of the boiler system connectionpipe is not easy.

Choosing a heating system circuit

• -pipe - heat loss increases in each of the next radiator away from the boiler.When this simple scheme can save building materials, but the heat in the rooms will be distributed unevenly

• collector - in this scheme, maintenance and adjustment of the system is greatly simplified, heat distribution is more or less uniform, but the total length of the pipeline increases, respectivelyand material costs

• -pipe - the most suitable for private house wiring scheme heating pipes, in which they are installed around the perimeter of the room and are fed to the radiators.

banned reinforcement of any type in the interval between the heat source and system protection.

Selection diameter polypropylene pipes

When connecting pipes of different materials should be considered a match:

• By mp metalloplastikovye Dame 20x2 connect PP pipes heating DN25h4,2
• 16x2 Pipe diameter should be connected to the polymer DN20h3,4
• Hardware 26h3 connected to the polypropylene DN32h5,4

when designing the system should not use the product with a diameter of more than 1.2 '', it will lead to greater heat loss than with thinner pipes.To connect pipes in two pipe system from the main line to the heater polymer tube diameter 20h3,4 used.

Flow, from the heater to the last of the heater must not be more than 25 meters in length, the maximum capacity of the heater should be less than 12 kW.If necessary, increase the length of the supply line should be selected larger pipes - 32h5,4, which are connected with the metal to the size of 26h3, or to develop two circuits of the heating network.

specifics of the installation of plastic pipes

to connect PP pipes need to have special soldering.its operation features include control of heating pipe edges, which are connected, and rigid fixation products for the first 10s.

order to qualitatively carry out the connection work, you must read the manual soldering tubes, and if possible to hold a trial, and then start the network installation.

To arrange heating in a private house with his own hands made of polypropylene, you must first elaborate scheme of the system, take responsibility for the selection of all the necessary elements of it.This will ensure its long-lasting and efficient work and create in the house a comfortable and cozy environment.