Build Daily

Building Materials

August 12, 2017 18:08

Why Lining Class A better cheaper options ?

click fraud protection

Lining What is different class from other varieties?

Almost every manufacturer that is engaged in manufacturing cladding boards, using a specific classification to distinguish between different types of Lining Quality.At a minimum, can have two classes of location A and B, it is often added to C, the first position is sometimes Extra grade.

However, if there is a desire to make repairs cheap and cheerful, thrifty owners to choose their class C, less B. Yes, they are well aware that swirls and spots on the wood look is not the best way, but the attractive price makes its job.

zealous as hosts usually acquired Lining Class A, and not by accident.Though it is more expensive, and the other two varieties (Extra's calculation can not accept, because when you use this item class A is shifted to second place, replacing Class A) finishing quality board looks much more aesthetic.

Given the fact that to bunk class C are allowed not only loose knots, and chips, as well as other minor defects, it can be understood that the special beauty to expect from such a material is not necessary.The maximum that can be done to refine the third grade, which is a little nedotyagivaet before marriage, it is clear the knots and to fill their places of assembly foam, which for a reliable picture can be slightly singe blowtorch.

Lining plastic, whether it is better than natural wood?

Linings Lining the living room or the bedroom usually do not cause difficulties in the selection of material for the interior decoration of the premises is usually bought the same material.But in places where the external environment could have the slightest effect on the walls, for example, on the balcony, the dilemma may be that it is better - wood or plastic Lining?Unfortunately, some guidance in this case is difficult to give, because each material has only an individual, the characteristics unique to him.

plastic lining, unlike wood in the cold and under the influence of ultraviolet rays becomes brittle.

If outdoor balcony and lined with wood, need for annual maintenance cladding boards, while the plastic does not require any further attention, except, perhaps, wiping dust.On the other hand, it needs to be applied a slight blow on the plastic lining, even in passing, and quite by accident, and the result may be unsightly damage in the form of dents or deep scratches.

Lining wood even to a fairly strong impact is almost insensitive, though, if you try, dents and nicks can be left on the wood.Well, if you ever want to hang a shelf or a mirror in the board to drive a nail or screw the screw is much easier than in plastic.

Lining, grade C - saving there

However, the "face" of the third grade boards quite unpresentable, but this wall paneling, interior walls that's hot.Hide swirls on low-grade cladding boards is easy, especially if they are not falling.Enough to take a blowtorch to burn and randomly scattered on the board spots, preferably small and not very abundant in bulk.

Likewise masked and darkening wood.In addition, tightly fitting knots can draw beautifully, burning them along the fibers on both sides wide at the base and gradually becomes thinner rays, to get a figure, resembling lentils.After processing blowtorch better board varnished or covered with mastic.

If you suddenly fell bitch, or you have found on the boards chipped - it does not matter.Take the mounting foam and fill the gaps in the boards, and after drying, carefully cut away the excess frozen mass.If the surface of the board present dark knots and a bright spot of foam striking opal his blowtorch and turn-round section, strongly reminiscent of a knot.

Some antiseptics give the wood dark colors, such a solution can be evolved to mask too dark spots to grade C Lining changed, even if illusory, to a higher class.

instagram viewer