Selection and installation hook for chandeliers

Installation chandeliers hanging on the hook, or strap yourself

Safely and securely install the chandelier can be independently, while having a minimal set of tools and knowledge.

Chandeliers, mainly divided into 2 types:

1. Those that are fixed with a bracket.
2. hung on a hook.

For those who are wondering how to hang a chandelier without the hook, we offer the installation of the lamp on the bar.This is usually in the form of lamps lampshades.Installation is carried out in several stages.

1. With chandeliers removed all ceiling and decoration in order to protect them from damage.
2. then try on her to the point where it will be located.Cover part should fit snugly with no gaps, and the ceiling.
3. Now do the layout for fixing strips and put a ceiling mount for chandeliers.Planck should not create interference wiring.Now drill holes for dowels and pierce them to the ceiling.On the dowels are placed the bar with screws.
4. Before you attach the lamp, it is necessary to check the correctness of its powering from the mains.
5. Attach the lamp to the bar is very simple - it is enough to make and match the connection holes.The holes are screwed screws.
6. Now you can mount the ceiling and decorative elements.

Mount Ceiling hooks

Almost all the houses under the chandelier hook set at the construction stage.If your house is fitted, it should be checked for strength.Make it simple, strong enough to pull him.You can also hang the cargo weight is the same as the planned lighting device, and let it hang for a while.

If the ceiling hook is fixed well, it can be mounted on the luminaire, if not - it will have to install yourself.

To do this:

1. Drill a hole under it.
2. In the prepared hole screw anchor.The anchor must be screwed with difficulty, it should fit snugly to the walls of the hole and do not fall out.
3. anchor is required for the concrete ceiling, if the hook for hanging chandeliers mounted in a wooden ceiling, you can use a normal screw.
4. If the anchor hook mounted in a plasterboard ceiling, it must be fixed to the most overlap.Between the concrete and plasterboard ceiling, there is always a gap, which must be cut off using a pass on a chain hook itself.Chain length is the length of the gap between the ceiling.In this case, the lamp is mounted on the circuit.Attached in this way chandeliers, regardless of their weight, and are perfectly kept completely safe.

After hook assembly held should only hang on to him a lamp.Much more complicated is the connection of electric wires.It is necessary to connect the phase conductors of the same material with each other, the remaining single insulated wires and connected to a zero-zero.

When mounting the chandelier on the metal hook, for safety reasons, it must be insulated.As you can see, the whole process is very simple and this may well cope amateur.

hooks cost chandeliers

If your house does not provide hooks for chandeliers, they will need to buy.Price hook quite small, it is about 50-100 rubles.

therefore advisable to save on the installation of the lighting device and hold it yourself.