Chimneys stainless steel stove - new mounting trend

assortment of chimney structures and tools for their installation

Chimneys pechnyebyvayut:

1. single-wall pipe.Installed in rooms, which correspond to the rules of fire safety.It has a greater heat transfer and may use a number produktoov combustion.
2. udvoennnaya pipe.It consists of two metal components (layers), which between them are filled with cotton or other whether tploizoliruyuschim component sealant.Used construction where other constructions will not touch.This device is able to improve the fire safety of the premises.You can also primeniti outside the premises in order to reduce condensation on the inside presence pomerhnostyah.The pipe thus provides a long useful life.

Chimneys are 4 varieties:

1. of brick.
2. of the modules.
3. steel.
4. ceramics.

brick kiln chimneys, of course, made of bricks for wood stoves, fireplaces and boilers, which will burn solid fuel.They eventually overgrown with soot and form condensation and combustion products emit harmful acids for the human body.At present, these pipes are less used.Modular

made of stainless steel and fine ceramics or plastics.Collected as a mosaic, have a circular cross section and a smooth inner surface which does not create resistance and accumulation of ashes and soot on the walls.

Steel referred to as modular chimneys.There are double-walled with a thickness of 1 millimeter.Even when a large heating they retain rigidity.Used for waterproofing roofs using galvanized steel and basalt.

Ceramic - already more advanced products.It resists weathering and condensation, heat and mechanical stress.Meets fire safety standards, and their life span is 120 years.Quickly assembled and inexpensive.

material for the production of: stainless steel

composition of the material depends on what impurities are in steel.They dictate the totalizer.

example:

AISI 304 material (321) comprises a 17% nickel and 9% chromium, which are burned at 450 ° C, depending on the existing humidity.

Sleyuschy follower of prdyduschego - is AISI 309. It is used for solid-fuel boilers and chimneys, and sostotna 20% nickel and 25% chromium.Also included in the molybdenum and titanium, which are in addition to the heat resistance have the opportunity to work gas-like substances above 850 ° C.

to install chimneys using a stainless steel must be compared to the operational capabilities of steel products of combustion of various fuels.

benefits that imuyut stove chimneys

1. -section in the chimney (oval and round) on the lower twist that reduce cravings.
2. flow resistance produced by the smoothness of the surface.
3. Have resistance to temperature and can not be corrosion and chemical agents.
4. elements weigh little, so it is not necessary to create and strengthen the foundation for mounting.
5. Installation of a new chimney can be made to an existing chimney system.
6. The average duration of the robots 50 years.
7. chimney stove and their installation shall comply with the recommendations of the fire safety service.
8. Pipes made of stainless steel easy to maintain and do not require any unusual features.
9. complex and interesting chimney can be mounted only with the help of a large list of items.

Components

Standard set is represented as:

1. Linear furnace stainless steel tube.It has a different length and eliminates the cutting material.The most common size - is 0.33, 0.5 and 1 meter.Also it is necessary to designate the pipe section species.During the installation of the chimney to the supporting structure using special clamps that attach them to the walls.
2. Tee with 45 ° tap, which is intended for heating and carrying out communications for the lines.In other words they are also called audit devices for cleaning structures.Knee allow the guide tube in the required direction.Standard rotation angle - of 15 to 90 °.An important fact about the knee refers to the fact that it can withstand greater load and voltage.
3. condensate.Presented as forming a condensate outlet and on the inside, where these devices are used watering.It can be placed on the bottom surface of the chimney.
4. deflector.It protects the upper part of the tube from the rain and sudden displays of bad weather.
5. Link in furnace flues supported by dampers, which are inserted into various designs.Regulated by section.When installing chimney follow the same laws and regulations as a constructor, in which one part of the string on the other, and as a result creating a holistic element.Seal the joints do not need, and do not use sealing compounds and should comply with the manufacturer's requirements.