Cement chipboard ( DSP ) - the characteristics of "young" material

How is DSP?Produced

DSP based cementitious compositions, wood shavings mixed with a different group-water and special chemical additives in the form of sodium silicate and aluminum salts.During the manufacturing process, aqueous solutions of these additives is treated chips, producing its mineralization in special mixers.In the next step of the process is added water and cementitious formulations.

Going on a conveyor mixture forms a multilayer structure carpeted flow.Outside placed a small fraction of the chip, but inside - bigger.After the formation of such a "mat" is pressed.The result is a monolithic and does not separate plate structure with a smooth surface, as a rule, does not require alignment finish and ready for painting after a simple primer.

properties and characteristics of cement particle board

these advantages DSP you can start with its safety: and environmental, and fire, and chemical-physical and biological.A material with properties very similar to the timber as one of the constituents.It is also easy to process, and in addition a lot more durable and does not rot, beetles, carpenter simply turn away from this plate.

secret is that when converting a cement slab structure are highly alkaline environment, does not allow the development of harmful fungi and insects.Therefore, cement particle board, which is under the influence of the characteristics of this process are greatly improved, is very strong, not toxic and not carcinogenic, waterproof, fireproof, as well as an excellent sound insulator.

plate can be used to work in any climatic zone, it can be successfully used for interior and exterior use.Stove good nails, drilled, cut ordinary hacksaw, polished.

Among the shortcomings can be noted that the cement particle board, the weight of which is probably the largest among the materials for the "dry" finishing require to work a couple of mates.Weight sheets over a ton per square.Furthermore, during sawing allocated fairly large amount of dust.

Application and installation features DSP

Cement particle board, the application of which can be seen in the facade decoration and insulation works, successfully copes with its tasks.Cover plates ceilings and floors, performed internal partitions between rooms, the roof is made of roofs, they are used for the manufacture of window sills, to perform non-removable formwork.DSP because of its origin is very adhesive to concrete and works great as a permanent formwork during the concrete work.

above properties and characteristics of cement-bonded boards make very attractive their application in individual building. example, cement particle board with your hands allows you to build a house, bath or office frame structure.It uses all of the wonderful characteristics of cement-bonded boards.Plates are used for floors and roofing base of manufacturing partition walls and other parts of the house.

Holding mounting plate on the frame made with fastening self-tapping screws or nails.It is important to provide protection against corrosion of fastener elements.The joints between the slabs necessarily shpatljujut compositions for outdoor, can be used and silicone sealants.

After grouting exterior cladding of cement-bonded plates can be further processed.To do this, conducted a preliminary primed surfaces.You can then paint, revet any materials used for facade finishing plaster.The same principle is used in interior decoration of surfaces of the DSP.