Build Daily

Construction Site

August 12, 2017 18:06

Implementation of the installation of ventilated facades with their hands

click fraud protection
Implementation of the installation of ventilated facades with their hands

Installation of ventilated facades is necessary to increase the durability of the house and give it a more aesthetic appearance.

Due to this construction the walls are aligned, and get a nice view, and the house becomes warmer and more reliable.

Contents:

  • Mount Technology carry out the installation with their own hands
  • Prices for services

Mount Technology Design ventilated facade is a sandwich made of a carcass layer of insulation andfacing material, such as ceramic, fiber cement, metal siding and others.

sure hollow niche for ventilation must be abandoned.

Ventilated facade - is a complex system, if its installation will be allowed even the slightest error, the system service life is significantly reduced.

Video:

Therefore, doing the work, you must follow exactly ventilated facades installation technology.

Preparatory work is as follows:

  • Preparation of technical documentation;
  • Designation danger zone boundaries at the facility;
  • Preparation and inspection of façade hoists;
  • marking points places the installation brackets on the wall of a building;
  • holding assembly.

Installation of ventilated facades in the following sequence:

  1. in the wall holes are drilled using a punch;
  2. under each bracket is set paronitovye lining through the anchor dowel;
  3. Install bearing brackets, spinning anchor plugs screwdriver;
  4. Further installation is carried out insulation that helps protect the building from noise, wind and rain.
  5. Plate insulation hang through the slits for brackets.

Panels membrane vetrogidrozaschitnoy hang from the top and fasten them temporarily.

On installation technology of ventilated curtain facades paintings should be hung overlapping.

in the wall through the plate and the film drill holes which establish Belleville dowels.

Mount plate heater starting from the first row of the cap, which is set on the first row.

Video:

hang them horizontally, taking care not to leave through the slits between the boards.The installation of ventilated facades is not finished yet.

Then proceed to the installation guide.To this end, the regulatory bracket is fixed vertical guide profiles.

profiles installed in slots supporting brackets.They are fixed to the supporting brackets by means of rivets.

profile must lie freely so that it can move vertically and to compensate for thermal movement.Then set fire cutoff.

The next phase - installation of the air conditioner is on a ventilated facade.He will release condensation and heated air.

Photo:

Split has become very popular in recent times, it helps to achieve the ideal conditions in the premises, but the installation of the air conditioner on ventilatedthe facade is very time-consuming work.

further held facing installation of the selected materials.

carry out the installation with their own hands

Many owners of private houses decide to carry out the installation of ventilated facades with their own hands.To do this, choose the right materials.

important element of the system are the arms and guide profiles.They should be made of galvanized or stainless steel and withstand a certain load.

To do this, at their choice, pay attention to the properties of the material, its thickness and size of the ribs.

They all parameters must match the design requirements.Saving them is impossible.You can use aluminum products, they are much lighter than steel.

Video:

installation instructions ventilated facades with their hands is the same as for a professional installation.It is shown above.

attaching the windshield film, consider the following rules:

  • Attach film on the outside of the thermal insulation, using dowels Belleville;
  • Overlaps must be at least ten centimeters;
  • inner side of the film is tightly attached to a heater;
  • In areas overlap film is attached connecting and sealing tape to avoid unwanted condensation.

Installation cladding is carried out strictly according to the scheme of ventilated facade installation.

porcelain plates or other facing materials are installed after the arrangement of the terminal clasps and securing them to the profile, and then the rubber seals are inserted in the profile.

Installing granite are bottom - top, left - right.Stoneware tiles are fixed keeping a gap.

If the design and installation of ventilated facades will be performed properly, it is inevitable there will be problems.

The most common is a blockage of the air gap due to the fallen insulation or detachment of the membrane.

They bend, get wet, and the owner subsequently have to redo everything and spend money on repairs.

Therefore subsystem installation of ventilated facades are best left to professionals because if the installation of ventilated facades technology respected and carried out by all the rules, they will protect the walls of the house at least twenty years.

Prices for services

Price Installation of ventilated facades is determined by the aggregate value of the carcass materials used thermal insulation, cladding type and arrangement of additional elements.

If an arrangement to involve experts, here also included the installation work.

At arrangement of the outer air conditioner costs a ventilated facade installation should increase significantly as the level of difficulty of this work are quite expensive.

To find out how much the installation of ventilated facade, it is necessary to know the number of windows in the house, the availability of the number of bay windows and external corners.

Video:

The more, the more difficult it will be working on arrangement and, therefore, prices for the installation of ventilated facades in this case will be higher.

If you have decided to do the installation yourself, but at the same time get a heater known companies and other high-quality certified materials, the amount of the budget will not do.

Cheapest finishing materials - a siding and steel sheet, and the most expensive stone belongs.

If all works on the arrangement you perform correctly, the ventilated facade will serve you flawlessly for about fifty years.

not skimp on materials and installation works on the facades, the search teams willing to carry out insulation at the lowest cost, because this may soon require additional costs.

instagram viewer