Build Daily

Do It Yourself!

August 12, 2017 18:06

Convenient shelves for the garage that can be made with your own hands

click fraud protection

Any garage without rack is only for storing a car seat.And the latter requires daily care and regular maintenance.Therefore, in the garage should be the appropriate tools, materials, rags.

for their easy storage, and use is best suited rack.The most convenient way to do it with their hands, as the size of garages and are in their various cars.

racks - for - garage

When the equipment rack must be provided:

  • that it does not take up much space and not interfere with the work, if the machine is inside;
  • storage not only tools, but also spare parts and small fasteners, tanks with lubricants and so on. Etc .;
  • possibility of installing clutches, elektronazhdaka;
  • presence table for repairs.

Based on these criteria, the selected installation site and the rack construction.As a rule, good racks are done in one of two ways.However, they have common elements.




table, on the sides of which there are two bedside tables with drawers.You can make a table and odnotumbovyj.In that case underneath the one hand is enough space for the large cans or other containers.Instead of drawers in the cabinet can be equipped with shelves.If you make a table without thumbs, it will lose a lot of "useful" space.And keep all under the table, a total heap, very uncomfortable.

shelves - it is in their location and appears opposed structures.Often make shelf whose width decreases with height location.This is convenient in that up to the top, very narrow, it is easy to reach.It is usually kept jars of fuel, cogs, Gadget, and so on. D.

But there is another structure with the uppermost shelf is wider, the size of the table.It is almost the ceiling and does not interfere in the work.On a shelf convenient to store items that are used or in a certain season, or very rarely.For example, fishing equipment, dinghy, garden sprayer.All these things are often stored in the corners and constantly stir.Even extra empty jars for preservation, paint cans can be removed there.

rear wall shelving is essential.Firstly, if it is strong, then it is possible to set the "Remote Control": the light switch in the cellar, automatic protection for Emery, outlet (to connect an electric drill, charger).Second, it eliminates the wall hit the table a variety of small details.If you can not make it over the entire length of the table, it can be small and, for example, of laminated plywood or chipboard.And the rest of the wall close the sheet of chipboard or plywood usual.

for mounting the rack frame is more convenient to use a metal area.In the absence of welding machine design can be bolted together.After installation of the rack at the place you want to attach it to the wall and to the floor (if possible) to stabilize the situation.

rack

As the shelves are commonly used or boards or sheets of particle board, which are placed on the pre-assembled frame.If the length of the rack is relatively large, it is necessary to consider additional props for the shelves.This will increase their "carrying capacity."

instagram viewer