Build Daily

Equipment

August 12, 2017 18:06

Not locked the door of the washing machine , why not close the door , the door and the door , what to do

click fraud protection
The door is not locked in the washing machine
  • Types of breakdowns
  • How to replace the handle of the hatch?

All current models of washing machines are equipped with automatic locking function of the hatch, which is triggered as soon as the washing program starts.A locked door can not be opened without suspending operation of the machine.It is intended for security purposes: automatic lock prevents the flood due to not completely closed the door, and prevents accidental opening of the hatch (eg, young children).

Lock the door of the washing machine

hatch If there was a breakdown as a result of which it is not blocked, the washing machine will not start washing.On why this is happening and how to solve this problem, you will learn from this article.

Not locked the door of the washing machine - the solution

Types of breakdowns

All the reasons for the automatic locking function may fail, are divided into two large groups.The first group includes mechanical breakdown, and the second - the problem with the electronics.

Not locked the door of the washing machine - the replacement of the castle
Not locked the door of the washing machine - repair hatch locking device

consider each of the possible types of damage in more detail.

breakage type

reason for failure

Mechanical damage

Broke handle-lock on the hatch

most oftenthis occurs after several years of active operation of the washing machine - in this case just brittle lock mechanism wears.Also, the handle may break due to the fact that the door was hung for drying heavy items.

skewed hinge on which the door hangs

The reason may be poor quality components.Also, misalignment may occur due to the fact that the gap between the door and the wall stiralki hit something.

displace the locking tab on the handle

door can not be closed due to the fact that the displaced rod (metal rod), which holds the lock latch in position.This usually occurs when the door is too heavy pressure.

deform the guide, which is responsible for blocking the hatch

If the door can be closed, but you do not hear a clicking sound, most likely worn out and bent the plastic guide.This occurs as a result of active exploitation stiralki or poor-quality raw materials.

problems with electronics

faulty hatch locking device (UBL)

UBL is driven by the voltage effect which is supplied to it from the start of the wash until its completion.Eventually, under the influence of high temperature, metal elements of the device may be deformed.Particularly contribute to this voltage drops.

The UBL was a foreign object

If you neglect regular cleaning washing machines, detergent residues, debris, lime particles, thread, buttons, etc.may accumulate to form blockages in various locations of the device, including, and UBL.

defective control unit

Electronic module of washing machines - it's quite a complex device that can break down under the influence of a variety of factors.This occurs most often due to a sudden power failure or power surges.
Not locked the door of the washing machine - repair their own hands

Watch a video tutorial that shows how to disassemble the hatch locking device if it was the subject.

How to replace the handle of the hatch?

If breaking the handle of the hatch is serious enough, the easiest thing would be to replace the entire mechanism than to sort out every detail.First you need to remove the broken handle.

This is done in the following sequence:

  • disable the washing machine from the mains;
  • remove from the door hinge;
  • unscrew the bolts connecting the two halves of the hatch;
  • gently disconnects halves;
  • remove the glass part of the photograph and the location of all the elements;
  • gently pull out the metal pin that fixes the handle;
  • remove the plastic handle, and then disconnect the spring-loaded and returns the hook.
Removing the door washing machine repair
Dismantling the hatch of a washing machine
Dismantling of the hatch for washing machine and replacing the handle

Now, when the old part is removed, it is necessary to replace it with a new one.

To do this, take the following steps:

  • carefully studying the photo, which recorded the original layout;
  • set in its place, and spring-loaded hook;
  • insert a pin in the first hole;
  • holding pin and spring-loaded with one hand, and the other set in place the handle (the pin must pass through it);
  • insert the other end of the pin to the opposite hole;
  • check the correct arrangement of parts: a spring must reject the handle slightly to the side;
  • collect the door and return it to the place.

Visually, the whole process of disassembling the door, see the following video.

instagram viewer

Categories

Latest Blog Post