Build Daily

Decoration Of Premises, Renovation Of Apartments

August 12, 2017 18:07

How to make a niche of drywall in the living room with his hands

As time passes, the fashion on the situation in the apartments changed beyond recognition.Today no one would think to be installed in the living room a bulky wall with glass shelves to crystal or collected works of various authors.All these values ​​have long Soviet era is not a sign of wealth and good taste, so there is no need to show them, forcing all the free space windows.

Content

  • Species niches plasterboard
  • How to decide on the form of a niche that will be suitable for your room?
  • niche design of the drywall
  • Tools and materials required for the manufacture of niche plasterboard with their hands
  • How to make a niche of drywall?
  • Decorative ready niches

Currently in vogue lightness, beauty, simplicity and lack of clutter heavy pieces of furniture.Match these parameters may bathroom, equipped with different variants of the niches of the drywall, which is easy to manufacture with their own hands.

Species niches plasterboard

Depending on your destination, a niche of drywall, photos of which are given in this article are divided into functional and decorative:

  • functionality are the niches that have been designed to integrate intothem any technique or piece of furniture, such as a TV niche.Because drywall is also possible to make a niche under the aquarium, etc.. The hosts are very fond of modern houses to construct at a niche for bar counters, which are a continuation of the very rack.Sometimes they come with doors and can be used also as a closet.

Niche - of - drywall - 01

  • are decorative niches that do not fulfill any role, but simply decorate the interior.They usually adorn vases with dried flowers, frames with photos, decorative plates.With them it is possible to supplement the situation, accents, etc.There are also niche floor, playing the role of decoration.They are often placed flower pots, figurines of wood, and so on.Typically, their height is within 80 cm. The carpet is best combined with the horizontal recess recessed wall or ceiling, composed of several layers.

How to decide on the form of a niche that will be suitable for your room?

Before you start to mount niche plasterboard in the wall, you need to consider a few important points:

  • At what point you want to place them.Depending on where the niche is located in the region of the window on the partition between the chambers or elsewhere will be determined by its parameters.

  • How many niches you want to see in your room.If more than one, then it is necessary to think over their design so that they blend with each other and with the overall decor of the room, and while it did not look overloaded.

do - niche of drywall

  • design solution.Niches need to have and to equip so that to focus on the merits of the room and at the same time divert attention from the shortcomings, as well as visually change the proportions, if necessary.By the way, when you make a living, it is considered to be the most appropriate niche in which you can arrange all sorts of decorative items, such as vases with dried flowers, decorative shells, figurines and others.

  • functional efficiency.In the construction of the structure need to think about it because the gainniches often used for video or television installation.

niche design of the drywall

living room, which is decorated with decorative niches made of plasterboard - it is a modern fashionable trend, which does not leave anyone indifferent.In the development of the project handwritten finish the living room, you can dream up and create for fun, embodying the unrealized talent designer.Using the full range of existing materials and the latest technology home decoration, you can create exclusive interiors with a firmly established identity.

Flight of fancy should not be limited by anything, but still observe some general rules still need to:

  • shades used to design a niche should be combined with a color palette, which sustained the whole room.When it is not necessary to paint in a niche too dark color, it may create the appearance of hole in the wall.

  • When a small depth of the niche, drawing on the wallpaper can be large and, on the contrary, at great depths - beautiful looks fine pattern.

niche -in- stene100

  • as decorative elements in a niche often placed pictures, mirrors, lamps and other.

  • With the help of well-designed lighting can draw attention to the decorative content niche, and gently and softly illuminate the room.

  • Niches can be positioned both horizontally and vertically.Horizontal wall visually make longer, so it is best to do them in the short walls.The most beautiful of all, they look next to the long, squat furnishings.But the niche is located vertically, will look harmoniously near a window or next to the wardrobe.

Tools and materials required for the manufacture of niche plasterboard with their hands

  1. One or more sheets of plasterboard (the number of sheets depends on the number and size of the niche).
  2. Metal profiles, and cross rails.
  3. brackets.
  4. dowels, screws, metal, screws Drywall.
  5. little filler.
  6. Self-adhesive tape for reinforcing joints in plasterboard construction - serpyanka.
  7. corners of aluminum or plastic perforated.
  8. drill with paddle "screwdriver".
  9. Roulette.
  10. Building level.
  11. Plummet.
  12. tools for cutting metal.

How to make a niche of drywall?

  • markup.It is necessary to make a layout, which will be performed on all parts of the carcass.Drawing its start from the floor, gradually moving on the ceiling, taking advantage of the plumb line.On the ceiling mark the locations of reference points and spend them between a line, which is the loop finishes.For greater convenience, drawing layout, you can use the guide profile.If you enjoy creative design has cutouts, it is best to use patterns.It is applied to the reference points and lead round a pencil.

installation - Stoev - profile - frame - 450h600

  • Installation guide.Runners set on the perimeter, and then design it as a basis established by transverse profiles.Mount them, fixing dowels through the base.So the structure becomes more rigid.The number of dowels can be anything, but at least to be used - it is 3 pieces per profile.If necessary, create a figure element on the edges of the guide profile make incisions and bend it.

  • Installation transverse profile.This profile will connect the design of guides at the top and at the bottom and make visible the general outline.The jumpers will also be made out of it.They are needed to impart greater rigidity of the construction and to subsequently build on these shelves.In this regard, they must be cut and installed as shown in the sketch, drawn in advance.

  • Electrics.In that case, if your intention is to build a niche plasterboard with lighting, the next step is to do the wiring.The basis for the power lights system is a transformer, designed to work for 10 000 hours, having an output voltage of 12 volts and a capacity of 120 watts.It is fixed on the hard rubber base which is located between the wall and the transformer.Distribution system is not complicated, all the lights are fixed in accordance with the parallel connection of a current source.We must not forget that the wires do not need to hang tangle inside the structure.It is best to fix them in pairs using electrical tape.Twisting the wires together to do contact layer at least 1.5 cm from each other, closing the tape place of contact.

installation - guide - profile - frame

  • drywall.Installation work on the skin of drywall, it is desirable to start with the internal surfaces niches.For facing the semi-circular elements cuts out the relevant details of the drywall sheets.If you use a one-piece liner sheet, not fragments, the design will be more stringent.It's a bit will increase the amount of material required, but this will get smaller joints, and hence serpyanku, fillings and fixings will take less.After the inside of the fully lined, you can go to the outside.Here everything is done similarly.Curved elements easiest stoning 3-4 centimeter strips of material bonded to the frame.If the surface of the curved element has sufficient largest area, then this option will not work, drywall sheet have to deform.It is better to buy a thin sheet, designed for ceilings, asit is much better to bend than the intended wall thickness and having a fair.Plasterboard small thickness (1 cm) can be used with a large radius of curvature.At the same time it's great bend and does not require advance preparation.should not moisturize as sheetswhile significantly increasing their fragility.

giving - ud- profile - desired - curvature

  • Putty.All joints, corners and joints can glue sheets serpyanku and handle glue "Fugenflyuger".Next to install perforated corners.They are reinforced with a filler of the same glue at the joints.It is strictly forbidden to use screws and other fasteners - only use putty ensures the evenness of the arc when installing arched corners with perforation (if used) on the curved design elements.After all the well dries out the surface should be completely cover the finishing putty.If due to lack of sufficient experience of similar works you make any errors, they can always tweak the grinder and abrasive mesh.This will be the most suitable field for further decoration.

Decorative ready niches

To decorate the niches of the drywall in the living room, you can use a variety of materials, here are some of them:

  • coating of artificial and natural stone;

  • colored glass;

  • wallpaper in various shades and textures;

  • decorative plaster and others.

All of these tools make it possible to create a beautiful relief on the surface of the recess.Typically, in terms of color solutions for wall recess draw up in two ways:

  • principle of colors similar to the overall design of the room.Those.if it is painted in pastel colors, and deepen the paint, keeping the same tone and shades;

  • the principle of contrast.Those.the color, the niche can be a much lighter or darker than with a touch of the walls themselves, and also to have a different color.But still not worth it to paint a niche located on the background light walls, dark color, otherwise it will look ugly.

profitably beat Wall recess can not only using the decorative materials, but also with the help of illumination.It can be located at the top or on the sides, transforming the entire design of plasterboard niches.Living in this case will look mysterious and intimate.

the fields

Nishi different shapes, configurations and locations can also be a separate sculptural composition and have an individual finish.

deepening in a wall can have one of the surfaces in the form of a mosaic depicting the beautiful landscape and equipped with a backlight.This design gives the appearance of a window, behind which the sun shines all year round.

If the wall is located in a series of 2-3 small niche, it is best to decorate them, using the same palette of colors as in the design of the walls, the best bit lighter.To the corners look more neat strengthen them wooden or plastic slats.They are small decorative elements will look best, such as photo frames, various Souvenir, decorative candles and shells.

If the structure provides for a few niche shelves, it can be beat with the help of an unusual picture frames, in which case it will look very unusual.

unique works of art looks like an aquarium built into the wall, especially if it is properly illuminated.Its inhabitants slowly maneuvering between plants climbing on the water, creating a constantly changing picture, inspiring peace and tranquility.

also very beautiful and looks rich niche of the inner surface, which tightened expensive tapestry or carpet made by hand.But when you select this option lights required on a mandatory basis, otherwise the form may be slightly dark.

instagram viewer