Build Daily

Equipment

August 12, 2017 18:06

Washing machine does not start: What reasons , LG, Indesit, Samsung, Hotpoint Ariston, Bosch, Ardo, Electrolux

click fraud protection
What if the washing machine is not included
  • Washing machine does not respond to the inclusion
  • Washing machine including, but washing will not start
    • Washing program does not start, even though the lights are working in standard mode
    • Indicators randomly blink or light up simultaneously

problems in the washing machines are divided into two main groups: the machine does not respond to the start and the car is turned on, but the washing program is not started.

Washing machine does not react to switching

Washing machine does not respond to the inclusion

First of all, check if there are electricity in the apartment.It is possible that in a house without electricity or happened a short circuit, which knocked out the safety plug.Check the machine and, if it is turned off, cock the lever.Repeated failure?Then look for the cause of fault.

cause of eating disorders and is a residual current device (RCD).This occurs when the body of the washing machine was under stress, and when you touch it you an electric shock.

Inspect the power cord - wire coming from the washing machine.The high probability of failure or damage due to frequent bending or other mechanical loads.To check the serviceability of the cord using a special electrical measuring instrument - the multimeter (or tester).Replace damaged wire.If this is not possible, get a break, connect the fragments of the cord by twisting and secure with tape or solder.Note this method - an extreme measure.

Check the cord on the washing machine repair

Note the extension operation, which is connected through a washing machine.To do this, turn the unit into the wall socket directly.

Network Extender for washing machine

Sometimes the problem lies in the malfunction of a power outlet.It is easy to check the suitability, including through it the other device.If it works - outlet is working.

The socket for the washing machine - on serviceability checks

A number of washing machines the power output to the power button.Her condition is checked multimeter, working in the mode of the buzzer (sounder).Unplug the machine from the electrical outlet, rang the button "on" position.If the unit beeps - the current flows regularly.In off mode, the tester will remain silent.If a fault is detected, the power button must be replaced.

Checking the power of the washing machine

The device brands LG, Indesit, Samsung, Hotpoint Ariston, Bosch, Ardo, Electrolux has a FPS or interference filter.Its purpose - to neutralize the electromagnetic radiation coming from the washing machine and is able to influence the work of other home appliances.Normally, FPS goes down with prolonged duration of work or because of a short circuit.If it is damaged the electrical circuit is interrupted, power supply is broken, and the machine shows no signs of life.To check the condition of the filter, use a tester.Rang first input (to it are three wires), and then - output (here two wires).FBS is defective and needs to be replaced, if the voltage at the input indicated, but there is no output.

Inspect the control module.It is a printed circuit board, which governs the management of parts and units of the entire device.Here is the microprocessor, which provides coordinated operation of the machine elements.

To determine the cause of the problem, examine the details of the electronic module.A damaged item or punched path identified by proring multimeter and then replaced or propaivayutsya.Before repair, vote their own.

Fix damaged card capable person with sufficient skills and relevant qualifications.Buying a new module - is expensive, so in order not to risk, consult an expert.

Washing machine turned on, but does not start washing

Washing program does not start, even though the lights are working in standard mode

Make sure the laundry load after the door is securely closed.Otherwise, a special protective mechanism will not allow water to fill the drum.Next, make sure if the hatch lock occurred after the start of the program.If the door is latched just check if it is live.The current is supplied, and the door is not locked?Then lock the device need to be replaced.

Lock the door of the washing machine

Make sure that the drum is filled with water.The presence of unusual sounds or silence signals that the water entering the difficult and the car simply nothing to erase.

The drum washing machine filled with water - Check for unusual noises

did not help?Make sure that the correct selected wash program (do not press multiple buttons simultaneously or accidentally poked past).If in doubt, switch off the machine for 30-40 seconds, and then turn on again.CASE problem is solved.

LEDs blink or light up randomly while

In this case, look for the cause of failure in the faulty wiring.In most models, LG, Indesit, Samsung, Hotpoint Ariston, Bosch.Ardo, Electrolux wires are often in contact with the internal parts, because of what is happening over time damage.Check the condition of the cable tester and replace the problem area.

Also, the problem may lie in the blown capacitors that should be replaced.

These simple tips will help quickly and competently resolve common problems that arise in your washing machine.

instagram viewer