Parquet sanding dust - creating a perfectly clean and smooth coating

Scratching of parquet: tools and materials

old parquet sanding is not without the aid of additional equipment, the main machines are machines for grinding.They are such: for initial, rough scraping process for the final stages, and for the treatment of the space around the corners and walls.

Plus, the building needed a vacuum cleaner that will clean the room from excessive dust and dirt after the work (you can use an ordinary detergent).As seen from the above, the entire apparatus must be 4.In addition, also need some materials and tools.These include: brushes and rollers, parquet varnish, sandpaper size 40x40, 100x100, 60x60 mm mortar for cracks fillings (suitable Forbo or Loba ).

Note! Many experts recommend the use of the following brands of cars: Flip or of Elan (for cornering), The Columbus or Trio (for fine grinding), "TM" Odessa plant (for example, Odessa SB-206 for the initial, coarse sanding).

sanding the parquet with his own hands

So how tsiklevat parquet?This work is carried out in several stages: From beginning prepared the room, take out the furniture and other interior items also removed baseboards.Checked the grid - whether they correspond to the consumption of devices?On the drum machine is charged with sandpaper, which acts as an abrasive.

Then proceed to rough grinding work, during which removed the top layer of lacquer and wood.The direction of the machine should be perpendicular to the line along which fit parquet.During a single pass is desirable ottsiklevat band at about 20 centimeters.At each pass of the drum shift must be equal to half of the turnover.It is worth remembering that lower and raise it only during vehicle movement.

The next stage begin to fine grinding.With its help create a smoother surface.Apparatus for scraping of these works has three rotating disc, and each of them needs its own skin (sandpaper).As you wear it should be replaced.After completing this process, begin sanding the corners and along the walls of the space.

Next, a solution for the putty to the specified recipe on the package.It is necessary to cover up all the cracks.The mixture is sure to add a bit of wood flooring dust (ideal for color compatibility).Apply the sealer using a wide spatula on the entire surface to be treated.Once again you need to go sander and clean with a vacuum cleaner cover.

This can be regarded as grinding work completed.If you followed the instructions, even scraping killed parquet will be successful.On our site contains a special video, planing parquet which is described in more detail.

final stage: varnishing

When the grinding is complete, the start varnishing parquet.special varnish (preferably water-based) is selected for this because it dries only 2-3 hours.It is important to quickly and evenly distribute it across the surface, as condensation may form due to uneven drying.Remember that poorly made lacquer coating is removed only re-sanding, so be careful!

number of layers must reach three.Each of them is applied only after the previous drying.Meanwhile, it will be important to make more intermediate scraping fine sandpaper for better adhesion of lacquer.And after - finishing coat.Run the finished coating can be in a few days.However, bring the furniture and other interior parts is recommended only after 2 weeks.