A spiral staircase with his own hands

Beautiful and comfortable spiral staircase to the second floor can be made independently of any material.But the most practical possible to consider special sets of metal poles, handrails and wooden steps.Team ladder is strong enough and suitable for the organization of the transition to the attic or attic.Production of compact interior element with proper preparation will take no more than one day.

Drawings spiral staircase

Mounting support part

Installing the supporting structure starts at the top.And a spiral staircase to the second floor, made with his own hands, was perfectly flat, it is necessary to attach the first support member, using a builder's level.Any misalignment can lead to unreliable design.

Next part of the support is inserted from the bottom to the top of the already fixed support.Thereafter leveled height and fastened with screws.

It is important to consider the height between the steps and the further assembly to adhere to the same index.Starting with the third element, the design should be shifted to the side.

And when the supporting part of the metal will be collected by half, it should be set at some parts of the rack, or other supports, as shown in the photo.Rigid fixation of the support will be achieved only when attached to the floor.

Last metallic mount a stair well aligned with respect to the previous one.Under a support bolted to the floor, put up a mark.

The flooring drilled holes for dowels.After fixing the connection member holds the lower bearing.

All exposed metal parts are covered by plastic plugs.

installation steps and handrails

To understand how to make a spiral staircase with your hands, you need to carefully read the instructions, take accurate measurements and securely connect all the parts.Fastening steps is performed so that the lifting lugs are staggered.

originally placed on the boards mark where the screws will be.pre-drilled holes for ease of operation at each stage.This allows you to quickly and smoothly carry out their screwing to the supporting structure.

final assembly step will be the installation of handrails.The first set U-shaped metallic element.

To this end, the top step of the mark applied for mounting.

In the first part of the railing worn adapter to which the next component to be connected.When the attachment will be fixed, they inserted a metal arc with the adapter and tighten the screws.

correct manufacturing spiral staircase means not only mark the exact location of the railing, and their reliable fixation.Since this element is responsible for the safety of lifting and lowering of the spiral staircase.

mount behind any other part of the railing is also pre-marked on the steps.It is important to take into account the location of the adapter to which the element should be firmly screwed.

two connection points will achieve structural integrity.Detailed Video spiral staircase installation will allow to understand the nuances of the correct fixing rails.

height ladder railing this must not be less than 90 cm. The width of the steps ranges from 50 to 70 cm.

data rates sufficient to provide ease of use and sufficient rigidity.Additional drawings will help get the job done right and to equip your home and compact solid spiral staircase.

Video manufacturing a spiral staircase to the second floor